Pro-Ject Phono Box RS + Phono Box RS Phono Power Supply
Listed · 164 Views
1 Watcher
Items from this seller
This listing has ended.
Listings Similar to Pro-Ject
Time Left: Listing Sold
This listing has ended.
Condition | |
Payment methods | |
Ships from | Oakland, CA, 94618 |
Ships to | United States |
Package dimensions | 19.0" × 19.0" × 24.0" (20.0 lbs.) |
Shipping carrier | UPS |
Shipping cost | Log in to see price |
Original accessories | Box, Manual |
Average | Research Pricing |
Pro-Ject Phono Box RS + Phono Box RS Phono Power Supply. This two unit system is a great phono preamp set up. Have a look at Fremer’s review where he called this phono preamp setup a “chronic overachiever.” https://www.analogplanet.com/content/pro-ject%E2%80%99s-mmmc-phono-box-rs-chronic-overachiever
The bluebook for the Phono Box RS alone is $699. Retail for both the Phono Box RS and the separate RS Phono Power Supply is $1,199 for the phono box RS, + $699, $1,898 total. Take them both home for $800, priced to sell!
The Phono Box RS is an very flexible phono stage with gain controls on the front of the unit to make switching between MM and MC cartridges quick and easy. On the backside of the unit, both RCA and fully balanced XLR inputs and outputs make the Phono Box RS compatible with a wide range of cartridges. If you're looking for a phono stage that can match whatever you are running, this setup is your jam!
Also included is the Phono Box RS Phono power supply, as noted above, $699 retail value. Lower your noise floor with this separate battery powered power supply that powers the phono preamp.
This setup sounds great, was really humming with the Rega RP6 and the Classe CA 150 dual mono solid state amplifier setup I was running. I have decided to try and simplify my life by replacing this setup with the Anthem STR Integrated amplifier with the whole DRC digital room correction thing.
Both units are in very good condition. The front face plates for both are in excellent condition. Both units are in original boxes with manuals. The wall wart for the Phono Box RS is not included, dunno where that went, but you don’t need it since the separate Phono Box RS power supply powers the Phono Box RS. Both units will be shipped together double boxed in the original boxes.
Here are the full specifications for the Phono Box RS from Pro-Ject:
Input impedance | Fixed 10 Ohms or 47kOhms, |
Variable 10 - 1200 Ohms | |
Load capacity switchable | 100pF, 200pF, 300pF, 420pF, 520pF |
Output impedance | 50 Ohms |
Gain, MM / MC | RCA: 40, 50, 60 dB |
XLR: 46, 56, 66 dB | |
Signal to noise ratio | 91 dBA |
THD | 0.019% |
RIAA accuracy | within 0.3dB/20Hz - 20kHz |
SubsonIc | 20Hz / - 12 dB |
Inputs | RCA & XLR |
Outputs | RCA & XLR |
Power supply | 2 x 18V/300mA DC; 220 - 240V, 50Hz |
Power consumption | 150mA DC < 1 watt standby |
Dimensions W x H x D (with sockets) | 206 x 72 x 210 mm (8.1 x 2.8 x 8.3 in) |
Weight | 2000 g (4.4 Lbs) without power supply |
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Item can be returned within 7 days of receipt.
General Terms
Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.
Refunds
Buyer will receive a full refund in the original payment method less any shipping charges.