Spectral DMA-360 Monoblocks in Boxes NY/NJ/CT . TRADES OK
Listed · 1036 Views
2 Watchers
Items from this seller
This listing has ended.
Listings Similar to Spectral
Time Left: None
This listing has ended.
Condition | |
Payment methods | |
Contact seller after sale to pay viaCertified check, Personal check, Wire Transfer or Express Checkout | |
Ships from | Glen Rock, NJ, 07452 |
Ships to | United States |
Package dimensions | 24.0" × 24.0" × 10.0" (150.0 lbs.) |
Shipping carrier | UPS |
Shipping cost | $149.00 |
Original accessories | Box, Manual |
Average | Research Pricing |
Monaural amplifiers from the legendary american maker Spectral. This auction if for 2 units with manuals, boxes and power cords. I would rate these 10/10 functionally and 8/10 cosmetically. New double boxes were just purchased from Spectral and were quite expensive. The puppies are rated at 300W each at 8ohms and 533W at 4ohms. Internal and external construction and component quality is the highest I've ever seen. Cosmetically the exterior is in very good shape with no significant scratches or dents as visible in the pictures. One of the unit has some discoloration on the plastic insert front panel only visible when the unit is powered off, just above the logo and barely visible on the pictures. The tops do not have any scratches and the aluminum faceplates are clean except for one small nick visible in the pictures. The heatsinks are free of scratches or dents. Matching MIT interconnects, power cables and speaker cables are also available but not included in this auction. Available for pickup and audition in northern NJ and Union Square NYC. Call 646 852 2073
All high end trades (working or broken) welcomed. Let me know what you got.
From the spectral literature:
Specifications DMA-360 Monaural Power AmplifierPower Output
(continuous):@ 8 ohms - 300 Watts RMS
@ 4 ohms - 533 Watts RMS
@ 2 ohms - 680 Watts RMSOutput Compliment:90 Amps peakFrequency Response:+-0.1 dB, DC - 150 KHz
+-1 dB, DC - 1 MHz
+-3 dB, DC - 1.8 MHzDistortionStatic:less than 0.015% from DC
to 100 KHz, typically
0.009% @ 300 WRMS/8 ohmsDynamic:8 Tone Cluster Test 20
KHz @ 500 Hz separation
0.01% @ 8 ohms
0.015% @ 4 ohmsSpeed:Risetime:less than 300 nanosecondsSettling:1.5 microseconds to -40 dBSlew Rate:600 volts/microsecondNoise:Signal to Noise:97 dB nweighted,
107 dB ASA ACrosstalk:98 dB @ full power 8 ohmsInput:Impedance:10k ohmsSensitivity:1.5 volts / nominal outputPower Supply:Line Voltage:100 volts, 120 volts,
240 volts (internal wiring)AC Voltage Range:+-10%Maximum Consumption:2000 WattsQuiescent Consumption:250 Watts Operating Temperature:0 deg. to +50 deg. Cesius range,
32 deg. to +122 deg. FahrenheitProtection Features:DC Protection Servo:.5 volt rangeCurrent Limit Onset:90 AmpsThermal Threshold:Protects at 85 deg. Censius,
185 deg. Fahrenheit AC Main Fuses:120v 5A or 220v 2.5A slo bloSize and Weight:Dimensions:20" (50.8 cm) W,
7.23" (18.4 cm) H,
19.6" (49.9 cm) D,
Weight:67 lbs, 30.4 KG NetAll information and specifications provided herein are subject to change owing to the evolutionary nature of Spectral designs and technology.
All Spectral products are covered by a three-year limited warranty for parts and labor.The DMA-360 Monaural Reference Amplifier
The DMA-360 Monaural Reference Amplifier is the first limited production monaural amplifier from Spectral Audio. The DMA-360 is also the most powerful high-speed amplifier ever developed for high-end music applications. An impressive array of engineering "firsts" in the DMA-360 culminate seventeen years of high-speed fet design to produce the "ultimate" Spectral amplifier.
Spectral engineers pioneered the invention of high-speed fet audio amplifiers in the early 1980s with the wideband DMA-100 Class A instrumentation amplifier. From these innovative beginnings, Spectral has evolved increasingly powerful and sophisticated megahertz amplification for applications in the Spectral component system. Today these high-resolution amplifiers feature greater speed and settling capability combined with higher voltage and current than previously possible. The DMA-360 Monaural Reference is now the ultimate realization of this quest to achieve uncompromising amplification true to the live musical experience.
From much listening and design experimentation, Spectral has consistently pursued component systems having ultra-fast settling, high-speed circuit architecture. These have invariably out-performed more traditional often cumbersome high-end design methods to achieve superlative detail, staging and listener involvement. Indeed, test methodology simulating music waveforms and hearing acuity confirm that quickness of response and rapid signal extinction when reproducing complex dynamics are mandatory for accurate music reproduction. Only then can one preserve instantaneous waveform accuracy to prevent cover-up of delicate musical signals by previous events. Construction and performance of the Spectral DMA-360 Monaural Reference Amplifier for this demanding criterion and resulting sonic resolution are unmatched among contemporary high-end amplifier designs.
UNPARALLELED RESOLUTION, UNPRECEDENTED POWER
The Focused Power output section of the DMA-360 is only one of the many Spectral innovations designed to create the ultimate in amplifier control and resolution. A unique transformer architecture supports the critical requirements for lowest noise and high power capability of the powered output section array. In traditional high-end power amplifiers, output transformers are located away from active amplifier circuitry for purposes of noise isolation and construction ease. This virtually universal method extracts a significant sonic price, however, because of the speed and regulation losses which are imposed by the long power supply wiring harness. In addition, the EMI and noise which radiate from the supply harness invariably contaminate sensitive low level circuitry by noise modulating the musical signal. Spectral engineers have long recognized the problems associated with power supply noise contamination and have proposed a unique solution in the DMA-360 Monaural Reference Amplifier. The Power Vault electromagnetic field containment system virtually eliminates EMI radiation to the amplifier signal path circuitry as well as power and regulation losses through the traditional power supply harness. The architecture starts with Spectral's elaborate high performance custom power supply transformers. These unique designs are the result of years of research and development to maximize isolation and regulation. Each transformer features individual isolated windings to support each individual output transistor in the amplifier output section. The twin power transformers are mounted between massive machined mounting plates for damping and resonance control. The combined 38 lb. Transformer structure is then mounted on a constrained rubber floating suspension system similar to a fine turntable suspension. The finished transformer assembly is then suspended inside an EMI, RFI tight welded aluminum containment box located directly beneath the DMA-360 output section. The resulting transformer Power Vault containment system results in an uncompromising solution to the universal power supply noise problem. The high-current power transformers are now intimately sited next to their own high-current output devices with extraordinary noise isolation. The high-speed driver circuitry of the DMA-360 operates in a pristine environment free of the noise radiation and phantom signals which plague other power amplifiers. Dynamic range limitations are removed with a sonic clarity and quietude which are palpable. ULTRA PREMIUM DISCRETE CIRCUITY
Small signal circuitry is based on Spectral's proven discrete circuit multiple cascode double push-pull FET technology. Premium silicon array construction, similar to circuitry in the DMC-20 Reference Preamplifier, is applied to the DMA-360 to achieve enormous internal dynamic range capability. This reserve is linear class A with many times greater dynamic capability than program demands. It allows high current drive for quick controlled response from the very large output V-FETs as well as isolation from their internal electronic activity. Unhindered by interferences and slow cumbersome response of conventional practice, these parts operate with unyielding control and exacting precision. Reproduction is clean, effortless and highly holographic. Audio amplification paths through the DMA-360 are direct, inherently linear and simple. These minimalist configurations have always sounded and measured best but normally become ponderous and overburdened when protection and support functions are added. The DMA-360 takes a different route to solve the sonic problems of amplifier protection circuitry. To maintain the pristine signal path, a sophisticated analog computing ancillary system is thermal and opto coupled within the amplifier. This "hands off" operational management system observes device loading and power dissipation as well as speaker damaging out of range signals. It takes control without circuitous cross interfering connections to electronics in the signal path, leaving the musical signal pure and totally untouched. A REMARKABLE TOPOLOGY
The DMA-360 utilizes custom FETs and high speed bipolar transistors in a dense, fully balanced topology to achieve high-current launch and ultra-fast settling capability. RF (radio frequency) design techniques are employed to achieve a DC coupled power band with intrinsic bandwidth to almost 5 MHz!
Input Stage.
The shielded input stage utilizes a balanced, double cascode design using matched differential pairs of J-FETs. The cascode design derives its own ground reference and produces extremely high levels of isolation from the preamplifier and between the stages of the DMA-360 itself.
Gain Stage.
The gain stage utilizes super high frequency (RF) bipolar transistors matched in a cascode configuration to bring the circuit gain into the power device realm.
Output Stage.
The output stage consists of eight individually powered VMOS-FET output amplifiers. This precision amplifier array features individual push-pull drivers, high-speed power supplies and individual biasing to function as a single ultra-fast, high current output section. The result of these techniques is unprecedented fast settling and remarkable intertransient silence.
ULTIMATE AMPLIFICATION
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px 'Helvetica Neue'; color: #454545}
p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px 'Helvetica Neue'; color: #454545; min-height: 14.0px}
p.p3 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px 'Helvetica Neue'; color: #454545; min-height: 15.0px}
WHO WE ARE
Skyfi.nyc is a small startup business specializing in the purchase, reconditioning and reselling of select high end audio equipment. We only buy equipment the we admire and are passionate about. No mid-fi, no gimmicks and no junk.
Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the Hifi world. If it does not meet or exceed the original manufactures specifications, it will not be sold. We are select about the equipment we purchase, focusing on mostly analog, high-build quality, American and European built units.
Through our sister company, which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Project and Sony ES, we have access to OEM parts and service support. If you are local and are looking for any new equipment for the above mentioned manufacturers, please drop us a line as we can arrange both sales and professional installation in the tri-state area
PURCHASING GUIDELINES
If you would like to make an offer, please don't email or message us unless you are looking to trade something in.
If we are accepting offers, you will see a button on the listing page to do so. Please use it, as it is very hard to track offers through email or messaging. This way, we are all also better protected.
PAYMENTS
We prefer working through PayPal, which allows you to use a credit card or bank transfer. We do not charge extra for any payment fees. You can also send us a personal check (which will need to clear before shipping), certified check, money order or wire transfer. International clients without access to PayPal should use a bank wire transfer.
TRADE IN POLICY
We accept trade-ins of equal or lesser value under certain conditions. Simply ask and let us know the exact model, condition and what accessories are included such as a box, remote, manual, etc. We will only consider high-end equipment from mainstream manufacturers such as McIntosh, Mark Levinson, Audio Research, Krell, etc. and will typically pass on displays, projectors, receivers, dated processors and mid-fi equipment of any type. We will offer a fair value for your equipment, but keep in mind we are running a business and will need to be able to sell the equipment at a profit after investing a great deal of time and resources in testing, certifying, repairing, cleaning and packaging the incoming equipment. If you are looking for top dollar we suggest attempting to sell it directly to an end user.
SELL US YOUR GEAR (Working or Broken)
We will also purchase your used or broken gear and arrange pickup if you are in our local market. Just drop us a note for a quote, but be sure to include the condition and what is included.
HOW TO VISIT US
We are currently operating from a residence in Ridgewood, NJ. You are welcome to make an appointment if there is a piece of equipment you would like to see in operation before or after purchase. We have a well-equipped, dedicated listening room with tons of equipment of all makes and models. We are not a store, so please don’t make an appointment if you are just curious as to how a speaker or piece of equipment sounds. In essence, no tire kickers please.
If you are in NYC and cannot make it out to Ridgewood, we can arrange pickup in Union Square (14th Street) after the purchase. You can call or text (646) 852-2073 with any questions or to schedule an appointment. We can also arrange to install, calibrate and tune the gear in your listening room if you are in the local area. This is super useful when purchasing large speakers or heavy amplifiers. It is also great for ensuring your new turntable is setup correctly in its final resting place.
Thanks for looking and please send us your email address if you would like to receive a list of the equipment we receive from time to time. We promise not to bombard you with junk email.
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.