Esoteric C-02

In excellent condition with all packing.   
HighPerformanceSterero.com   We have an amazing amount of high end inventory (888)850-4366
Dual-Mono Design for Right-Left Independence The dual-mono design enables the C-02 to have two sets of power supply circuits (including two sets of power transformers) for each of the right and left channels. This was done in order to eliminate any mutual interference between the channels and to prevent noise being introduced from the power line. Pure and clean amplification is the great outcome. A Fully-Balanced Configuration Gives an Excellent S/N Ratio Signals are received through the fully-balanced input buffer amplifier design for an individual input system and maintains this balanced transmission at low impedance so that all inputs can remain free from common mode noise. This fully-balanced configuration increases the purity of signal transmission and provides an absolutely excellent S/N ratio.Block Diagram 
(One Channel)Input & Output ESOTERIC-QVCS ESOTERIC-QVCS (*) is a volume control system, which takes full advantage of this unit's pure signal paths. By turning the volume knob, the gain variable volume of all the four circuits - right and left channels, positive and negative powers - are activated. In this way, this system keeps audio signals independent (from right to left and from positive to negative), so that sounds are reproduced clearly with good channel separation and accurate phase characteristics. Furthermore, the deletion of cabling from the audio board to the volume device radically shortens the audio signal path and minimizes sound deterioration. As a result,the C-02 now reproduce sounds that are perfectly suitable for the name ‘reference model.’ 
* QVCS: Quad Volume Control System Low Noise Operation The control board for the entire ESOTERIC-QVCS is physically separated from the audio circuit and also electrically isolated using a photo coupler. The circuit design has also taken measures to make sure that microcomputer noise is not introduced into the audio path. This is accomplished by disabling the microcomputer until a function is initiated by the user. Low Rectifier Noise, Low Impedance,High Response Power Circuit(Five Transformers) Five different transformers are used (one for each of the five different power sources) - the input and the output amplifiers for both the right and the left audio paths, and the control section - combined with large capacitors make this extremely low impedance and high response power circuit possible. For better resolution and S/N ratio, the rectifier circuit incorporates the parts and components a reference model deserves. As an example, the use of SiC (silicon carbide) Schottky barrier diodes which have higher speed and lower noise than normal Schottky barrier diodes. ESOTERIC-HCLD (*) 
ESOTERIC's Own Output Buffer Circuit 
with Fortified Current Transmission 
Dramatically Enhances the Driving Performance of the Power Amplifier ESOTERIC-HCLD (*) 
ESOTERIC's Own Output Buffer Circuit with Fortified Current Transmission Dramatically Enhances the Driving Performance of the Power Amplifier Looking at the subtleties of the signal transmission between preamplifier and power amplifier, the ability of the component to transfer current efficiency determines the overall quality of the system. The preamplifier plays a significant role in this relationship. Serving as a line driver, it should fully drive the power amplifier to its maximum level to thoroughly convey music signals that can include such a broad range of music expression, from pianissimo to fortissimo. What is required here is high performance via high speed current transmission. 
For the purpose of attaining the ultimate performance of the C-02 as a line driver, the output buffer amplifier circuit uses high quality materials and has its own board separate from the input stage. The output buffer circuit provides the high current output performance necessary. Its slew rate, representing response speeds of 2,000 V/microsecond - is incredibly fast. Since this buffer circuit is provided to each RCA output terminal and to the hot and cold pins of the XLR output, the instant current supplied gets maximized. The C-02 reenacts the breathtaking reality of music whose dynamism tended to disappear in older systems during smaller current transmissions between the preamplifier and a power amplifier. 
* HCLD: High Current-capacity Line Driver Extraordinary Usability

• Gain per input is widely adjustable with a precision of +/-18 dB = 0.5 dB per step. This reduces volume variations from source to source.
• Volume balance between the right and left channels is adjustable with a precision of +/-6 dB = 0.5 dB per step.
• The output phase invert function allows an output that is appropriate for the power amplifier used. In addition, it is possible to individually determine a source-specific output phase and to easily implement phase management for the system.
• Unbalanced output (RCA), balanced output (XLR) and RCA + XLR simultaneous output are the options.
• RCA-2 terminals are provided to switch between normal line output and AV through output. This function allows you to connect AV preamp to the C-02, sharing the same front two-channel speakers (and its dedicated amplification system) between music and surround movie applications.
• Source equipment names can be programmed into the system using the remote controller.
• Display dimmer, mute, auto-display-off functions are also available.

MM/MC phono stage board (option) The C-02 is available with on-board MM/MC phono stage as an order option.

* The installation of the board includes hardware and software updates of the main unit, thus can only be done at our factory. Please contact your local authorized ESOTERIC dealer for more information.

Control Knob - Great Function and Flexibility The volume knob operates internal gain variable circuits which allows you to choose one of five volume curve options. This flexibility allows you to select the best operability based on the combined efficiency of a specific power amplifier and speakers. 
The control knob and the input selector are manufactured by machining a largealuminum block. The bold but precise finishing, using NC machining and the ergonomic rounded form provides a pleasing aesthetic appearance along with necessary functionality. * The volume curve options allow you to fine-tune, at low or high volume, a smooth linear increase in volume. It enables you to choose a curve that best suits your system. Newly Designed 3D Optimized Chassis Structure Our new 3D optimized chassis features a five compartment double-deck structure. Each circuit block is housed in its own compartment so as to place them three dimensionally. This structure greatly contributes to reducing mutual interference between circuits and provides the shortest signal path. Thick aluminum is used for the exterior. The 5 mm-thick steel bottom chassis is supported at four points using ESOTERIC's proprietary‘Pinpoint Foot’ (patent number: JP4075477). Vibrations have been suppressed effectively and high rigidity has been achieved. Aesthetics and Integrity of the System 
Achieved by Rounded Form Adding the C-02 will provide an aesthetic integrity to the system. The front,top and side panels along with the front corners are made of thick aluminum. The rounded shape of the top panel and the corners, where there are no screws at all, are inherited designs from the separate component system of the ESOTERIC flagship line.