Classe CA-2200 One Owner, factory updated 09/27/2017

For Sale, One Classe CA-2200 stereo 200WPC power amplifier. This amplifier was purchased new in 2008 and includes original packaging materials. The amplifier has just returned from the Classe factory with a clean bill of health and is in as new operating condition. See in the pictures the receipt from Classe. The amplifiers were updated with the most current firmware, tested for audio performance on the Audio Precision measurement system and QC'd in a system. This was one of three stereo CA-2200 amplifiers that I used to Bi-amplify a set of three Dunlavy SC-V loudspeakers in a surround setup. I returned all three of these amplifiers to the Classe factory to be checked out for preventative maintenance. While these were at the factory I got a demo of the new Bricasti M15 stereo amps and decided to upgrade my system with these new amps. The amplifier is still sealed from the Classe factory. Conservatively rating these amps as 8.5/10 visual and 10/10 operational. I strongly suggest that the purchaser choose the shipping insurance. I will not be responsible for damage in transit if no insurance is chosen. These are large heavy boxes. Local pickup is offered, but buyer will be responsible for 6.25% MA sales tax.

From the Classe Website:
CA-2200 POWER AMPLIFIER
The stereo amplifier, CA-2200, is rated at 200W per channel at 8Ω. The CA-2200 is simply our best stereo amplifier. Design features include balanced circuitry, overbuilt power supplies and oversized output stages to ensure the highest performance at every output level, with any loudspeaker.
Specifications:

• model: CA-2200 POWER AMPLIFIER (balanced inputs)

• voltage gain: 29.1dB

• bandwidth: 155kHz (-3dB), 22kHz (-0.1dB)

• phase: < -10° (22kHz)

• sensitivity 1.4Vrms

• 
  

• power/channel (continuous) (120VAC line, 1kHz signal regulated to 1% THD + noise into resistive load, all channels drive

load (resistive)

• 8Ω 200W

• 4Ω 400W

• THD + noise (unweighted, 10Hz - 500kHz bandwidth, 1Vrms/1kHz input)

load (resistive)

• none 0.002%

• 8Ω 0.003%

• 4Ω 0.005%

• noise FFT noise floor peaks all below –95dBV (with terminated inputs)

• S/N ratio (relative to 1kHz sine wave full level output into 8Ω) 108dB

• height: 8.75” (222 mm)

• depth (excluding connectors): 18.5” (470 mm)

• width: 17.5” (445 mm)

• gross weight: 92 lbs (42 kg)

• net weight: 80 lbs (36 kg)

• 
  

• idle power consumption 166W

• rated power consumption 480W