Autonomic Controls MMS5-A Media Server

I enjoyed this
server for about three years, with the Autonomic app to sync my iTunes library
(from a Windows10 Pro machine) to the MMS-5A. 
Since purchasing Roon, I no longer use this server.  I used it to send my hi-res AIFF files and
Tidal to my DAC via the coax output.

You can download
an iPad app from the Autonomic website to control remotely, as well as a
controller for the PC/Mac.

For the
purchase price I will cover the PayPal fee and UPS Ground (insured) shipping to
U.S. Lower 48 states.

Some info from
the Autonomic MMS-5A website:

http://www.autonomic-controls.com/products_hardware_mirage_mms5.php

Supports Streaming Services: Deezer, iHeartRadio, Murfie,
Napster, Pandora, SiriusXM, Slacker Radio, Spotify, TIDAL, TuneIn; add-on URLs
for radio stations; guest computer/device streaming via AirPlay

Supports Audio Formats: .aif, .aifc, .aiff, .au, .cda, .flac,
.m4a, .m4p, .mp2, .mp3, .mpa, .rmi, .snd, .wav, .wma, .wplInternal Storage1 TB
(1000 GB) Magnetic (holds approximately 200,000 MP3s) Multi-Source Pre-Amp
Output4 pair (L/R) analog unbalanced line-level audio outputs, RCA type,
concurrent independent stereo output (multiple streaming); output level: 2.0 VRMSDigital
Audio Outputs1x digital stereo output, COAX, RCA type 

1x digital 7.1 channel output, USB

Audio ProcessorALC892Digital-to-Analog Conversion

High Resolution 24-bit/192 kHzSupported Sample RatesDigital
outputs selectable 44.1 kHz/48 kHz/96 kHz/192 kHz 

at 16-bit or 24-bit resolutionMaster Volume-80
dB to +20 dBFrequency Response<10 Hz to 48 kHzS/N Ratio97 db, A
weightedDynamic Range>113 dBChannel Separation>90 dBVideo OutputsHDMI
(1080p and 720p); DVI (1080p and 720p); 

component video or VGA available with adapter
(not included)Digital Image Formats 

(for video slideshow).bmp, .jpg, .png, .tifLocal
SynchronizationMirage Media Sync for both Mac and Windows: 

download from web-based configuration under Firmware
tabCloud-based SynchronizationAmazon Cloud Sync (fees for online storage may
apply)Control System ProtocolsIP, RS-232, 2-way documented APIControl
InterfacesAMX, Control4, Crestron, RTI, Savant, URC, Windows PC/Mac, on-screen
navigation (OSN), Adobe Flash-enabled mobile devices and computers, Apple iPad, iPhone/iPod Touch

LAN Connection(1) 8-wire RJ45 with 2 LED indicators;
10/100/1000 Mbits/sec 

BaseT Ethernet port; green LED indicates link
status; 

yellow LED indicates Ethernet activityPower
Connection110V-240V: (1) External power supply DC 19 V @ 3.4 A;
mates with removable power cord (included)Main Power Consumption35 Watts @ 120
Volts AC, 50–60HzExternal Controls + IndicatorsPower On/Off;

Front blue light On/OffEnvironmental
RequirementsHumidity: 10% to 90% RH (non-condensing)

Temperature: 41° to 104°F (5° to 40°C)Dimensions2.25" H
(with included feet installed) x 17" W x 10" D 

(5.7cm x 43.1cm x 25.4cm); 

fits 1U rack-mount space (1.7" H) with feet
removedNet Weight8 lb. 10 oz. (3.6 kg)Mounting(2) rack ears included; (4)
adhesive rubber feet included

Install
Notes:

When
I received the unit, I downloaded an app from the “DHCP Reset” link on http://www.autonomic-controls.com/support_faq_mms.php.  In my case, I logged on to my Comcast router
and set a permanent IP address in the router for the MMS-5A and defined the
same on the Autonomic side, using the “Mirage Server Settings” web page, the “Server
Settings” tab, in the “Wired Ethernet” area, the “IP Address” field, in my case
http://10.0.0.15/Config/Machine.aspx
(replace the “10.0.0.15” with the IP address you have reserved on your router).