FourierTriumpheusedFourier Triumphe 6AS7 OTL AmplifierANY QUESTIONS PLEASE CALL ME 212-447-1972 FEEL FREE TO MAKE A REASONABLE OFFER SHIPPING IS EITHER LOCAL PICK UP AT MY LOACTION OR YOU HAVE TO HAVE A FREIGHT COMPANY SHIP IT TO YOU. I WILL GLADLY ...1400.00

Fourier Triumphe 6AS7 OTL Amplifier

Listing ID: lis8jbh1 Classified 
 Listed  · 1605 Views

4 Watchers

Items from this seller

Time Left: None

This listing has ended.

Condition
8/10
Payment methods
Ships fromAstoria, NY, 11106
Ships toUnited States
Package dimensionsunspecified
Shipping carrierLocal pickup only
Shipping costN/A
Original accessoriesBox, Manual
AverageResearch Pricing

ANY QUESTIONS PLEASE CALL ME 212-447-1972

FEEL FREE TO MAKE A REASONABLE OFFER

SHIPPING IS EITHER LOCAL PICK UP AT MY LOACTION OR YOU HAVE TO HAVE A FREIGHT COMPANY SHIP IT TO YOU. I WILL GLADLY DROP IT AT THE FREIGHT SHIPPER WITHIN 10 MILES OF BOCA RATON FLORIDA

THIS IS A SINGLE FOURIER COMPONENTS TRIUMPHE OTL STEREO BLOCK AMPLIFIER IN PERFECT WORKING CONDITION

Up for auction is my completely rebuilt Fourier Component Triumphe 6AS7 Triode OTL Amplifier in perfect working condition better than new! Below is the list of all the work that has been completed on these fantastic amps.

1. All new Russian 6AS7 output tubes matched via my custom built tube tester. I generally run these amps with only 4 to 6 output tubes in each channel instead of 8 tubes per channel as I was running them into Quad ESL 57's and the amp sounded great in that configuration.

2. Amp comes with new input and splitter/driver tubes NOS.

3. All the film coupling caps have been replaced with Mundorf Supremes.

4. Every electrolytic capacitor on both channel boards have been changed with top line products (United Chemi-Con & Nichicon) and these power supplies have been by passed with Wima MKP series film caps.

5. The amp has been completely cleaned, sockets and all and every fuse replaced.

6. Each resistor in both channels have been checked and all are tight and totally on point with exact tolerance. This check for the resistors in the negative fix bias circuits and the grid circuits were done both with no voltage or current on them, then again impedance checked with voltage and current on them at idle under load. All checked out great.

7. All diodes on the both channel boards have been replaced.

8. All of the 3 pin solid state IC regulators on both channel boards have been replaced with new components. No mods to the original circuit were required.

9. The soft start board has been checked both under load and with no load and it works exactly as required.

10. I have the original dual heavy duty shipping box for the amp. You will need to freight the amp to you and that cost is on the buyer.

11. The cooling fan works exactly as required.

12. I will include copies of the manual and the alignment procedure.

This amp is fully tested and work perfectly. I need to slim down my gear so its time for it to go at a rock bottom price. This is a very stable and fantastic amp with awesome control over good program material. You are welcome to come to my place and listen to it if you are in Boca Raton FL.

RMS POWER IS AS FOLLOWS TESTED WITH 8 OUTPUT TUBES IN EACH CHANNEL:

80 watts @ 8 ohms/Channel

SOUND IMPRESSIONS:

In the end the amp sounds great. I could sit here and talk about space and depth but instead I will just say that if you are an audiophile who loves clean sound with good control and a sweet midrange and you know OTL amps, this is a great amp for you! It has very good imaging and it stays centered and present. Now for me I used it with Quad ESL 57's listening to vinyl exclusively so I ran the amp with only 4 to 6 output tubes in each channel which gave me the right sound and lower output watts of course, which was plenty of power for my Boca Raton Townhouse.

SHIPPING OPTIONS:

FREIGHT ONLY AS THE REGULAR GROUND SHIPPING SERVICES (UPS, USPS AND FED EX) WILL NOT TAKE A BOX THIS SIZE. I WILL DROP IT AT YOUR SHIPPING COMPANY FOR THEM TO SHIP AS LONG AS THEY ARE IN WITHIN 10 MILES FROM BOCA RATON FL. I HAVE USED CRATER AND FREIGHTER FOR SHIPPING OF ITEMS SUCH AS THIS IN THE PAST AND THEY ARE AWESOME. THE BOX THAT HOLDS THE AMP IS EXTREMELY HEAVY DUTY! THE BOX IS 34" X 14" X 24" AND WILL BE ABOUT 75LBS. MY ZIP IS 33486 SO YOU CAN FIND A SHIPPER CLOSE TO ME AND USE THE ABOVE INFORMATION TO GET A SHIPPING PRICE.

NO INTERNATIONAL SHIPPING IS INCLUDED AT ALL!

LOCAL PICK UP IS ALWAYS WELCOMED AND YOU CAN COME AND HERE IT IF YOU WANT.

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.