Mark Levinson No. 585 Integrated Amplifier
Listed · 4691 Views
12 Watchers
Items from this seller
This listing has ended.
Listings Similar to Mark Levinson
Time Left: None
This listing has ended.
| Condition | |
| Payment methods |  |
| Ships from | Norton, MA, 02766 |
| Ships to | United States |
| Package dimensions | 26.0" × 26.0" × 19.0" (96.0 lbs.) |
| Shipping carrier | unspecified |
| Shipping cost | Log in to see price |
| Original accessories | Remote Control, Box, Manual |
 Average | Research Pricing |
Mark Levinson 585 Integrated Amplifier
Mint condition 2 ½+ years old Mark Levinson 585 Integrated Amplifier for sale by original owner. 2 ½ years left on transferable warranty. Comes with remote, power cord, and original boxes and packing. Please note Mark Levinson only puts owners manual online. Original cost $12,000. For sale for $6,500. You must have positive feedback.
Buyer pays shipping and PayPal fees
This Stereophile Class A integrated amp is conservatively rated at 200 watts 8 ohms and 350 watts into 4 ohms. It has an amazing built in DAC capable of 32-bit/192khz performance, as well as native DSD and DSD over PCM via USB with 6 digital inputs via USB, AES/EBU or S/PDIF. I sold my Bryston BDA-2 when I bought the 585 the DAC was so good. It also has an 80 Hz high-pass output for easy integration of subwoofers.
AMPLIFIER SECTION
Output Power: 200W RMS per channel @ 8Ω, 350W RMS per channel @ 4Ω, 20Hz – 20kHz
Damping Factor: >400 @ 20Hz, referred to 8 Ω
Frequency Response: 20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dB
Signal-to-Noise Ratio: >98dB (20Hz – 20kHz, unweighted); >103dB (20Hz – 20kHz, A-wtd),
Voltage Gain: 40.7dB (maximum volume setting)
Total Harmonic Distortion: <0.01% @ 1kHz, 200W, 8 Ω; <0.1% @ 20kHz, 200W, 8 Ω
PREAMPLIFIER SECTION: ANALOG
Input Impedance: >45k Ω (RCA & XLR)
Input Overload: >5.5V RMS (RCA & XLR)
PREAMPLIFIER SECTION: DIGITAL
Sample Rates/Bit Depth: PCM: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz/up to 32-bit;
DSD: Native, single- and double-speed
GENERAL
Analog Audio Connectors: 3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended line outputs (RCA); 1 pair loudspeaker outputs ("Hurricane" binding posts w/banana sockets that accept spade lugs with 1/4" (6.3mm) spacing up to 1/8" (3mm) thick)
Digital Audio Connectors: 1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos-Link); 1 asynchronous USB input (USB-B)
Unit Dimensions (H x W x D): 7.59" x 17.25" x 19.95"; 72 lbs.
Packaging Dimensions (H x W x D): 19" x 26" x 26”, 96 lbs.
Questions for the seller |
|---|
| Does the network connection do streaming or just software updates? It is for software updates. You would a device to stream to one of they multiple formats digital inputs. |
| Is it possible to run a seperate headphone amp from the pre-outs or are they only suitable for a sub? They are suitable for both. In the case of using it for a headphone amp you would not activate the High Pass filter so the entire frequency range would be passed. |
| What would be the ideal seekers to match with this ? I struggle to think of a speaker that would not work will with the 585. I used it with Aerial 7T's and currently I am using it with B&W 8023D's. Both speakers are revealing and love power and sound amazing with the 585. It is conservatively rated for power and handles low impedence very well.
If you can be more specific about your concern I can try to provide a better answer. |
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.
