MARK LEVINSON No.326S PreamplifierusedMARK LEVINSON  No.326S Preamplifier Excellent ConditionMark Levinson No.326S Preamplifier Excellent Condition come with Original manual,cord,Remote and Box PayPal Add 3.5% Please The No.326S has three pairs of balanced inputs on XLRs and four single-...5000.00

MARK LEVINSON No.326S Preamplifier Excellent Condition

Listing ID: lis94ibe Classified 
 Listed  · 827 Views

4 Watchers

Items from this seller

Time Left: None

This listing has ended.

Condition
9/10
Payment methods
Ships fromNorth Hills, CA, 91343
Ships toUnited States
Package dimensionsunspecified
Shipping carrierFedEx
Shipping costSpecified after purchase
Original accessoriesRemote Control, Box, Manual
AverageResearch Pricing

Mark Levinson No.326S Preamplifier Excellent Condition come with Original manual,cord,Remote and Box

PayPal Add 3.5% Please

The No.326S has three pairs of balanced inputs on XLRs and four single-ended inputs on RCAs. Signals passed through the latter are internally converted to balanced operation before being fed to the two volume-control daughterboards (one for each channel), these also made of Arlon 25. Precision surface-mount resistors, controlled by a front-panel shaft encoder, are used to provide 1dB steps for the bottom 23dB of the volume control's 80dB range, and 0.1dB steps for the top 57dB. The volume control can be bypassed for each input for home-theater use, and the maximum gain for each input can be set from 0dB to 18dB, in three 6dB steps.

The left- and right-channel audio circuits are physically separated, and there are balanced and an unbalanced output jacks at each end of the rear panel. The input jacks are mirror-imaged (ie, input 1 is on the outside and input 7 on the inside for each channel), and in the center of the rear panel are the control, communication, and tape output jacks and a ground terminal. If the optional phono boards are installed, these take the place of the single-ended line input 7.
Overall, the No.326S's quality of construction is superb, as you'd expect from a preamp of this heritage and price.

------- Specifications -------
Description: Two-channel, solid-state line preamplifier with remote control, optional phono stage, 3 pairs balanced inputs on XLRs, 4 pairs single-ended inputs on RCAs, 1 pair balanced main outputs on XLRs, 1 pair single-ended main outputs on RCAs, 2 pairs record outputs on RCAs, communication connections on 8-pin modular RJ-45 jacks, IR input and trigger output on 3.5mm phone jacks, and RS-232 on 6-pin RJ-11 jack. Maximum voltage gain: 0, 6, 12, or 18dB, individually selectable for each line input. Volume-control range: 80.0dB. Gain resolution: 0.1dB steps above 23.0 on display (–57dB), 1.0dB steps below 23.0 on display (–57dB). Frequency response: 10Hz–40kHz, ±0.2dB. Input overload: 1.6V on XLR, 800mV on RCA (18dB gain setting); 3.3V on XLR, 1.6V on RCA (12dB gain); 6.6V on XLR, 3.3V on RCA (6dB gain); 13.2V on XLR, 6.6V on RCA (0dB gain). Input impedance: 100k ohms. Output impedance: 90dB. Residual noise, 20Hz–20kHz, input terminated:

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.