Mark Levinson No. 32 Reference Controller W/Phono ( excellent condition )

                                         ***  Collectable Extremely Rare   ***

         Mark Levinson No.32 Flagship Preamp with Phono

Hi...

Here is a Mark Levinson Reference No.32 W/Phono Reference Controller for sale. This unit is in excellent condition. Unit comes with original boxes, remote, manual, 2 DC cables and 1 power cord. Unit is for local pickups only so you can fully inspect the unit and be 100% satisfied. Audition is available for serious buyer.

** Don’t miss this rare chance to own one of the best all time preamps. **

                                              
                                       Specifications

Description: Line-level preamplifier with optional phono stage.
Inputs: 3 pairs balanced (XLR), 5 pairs single-ended (RCA, optional), 2
pairs phono (XLR or RCA), 2 Controller/DC cable connectors, ground
terminal. Outputs: 2 pairs balanced (XLR), 2 pairs single-ended (RCA), 1
pair record-out (XLR), 2 pairs record-out (RCA). Controller connectors:
IEC AC mains receptacle, ground terminal, 2 Controller/DC cable
connectors, three 3.5mm mini-jacks (for IR input, trigger out, trigger
in), 3 Mark Levinson Link communications connectors, 6-pin RJ-11 RS-232
port, two 8-pin RJ-45 control ports (PHASTLink;r-compatible). Maximum
voltage gain: 0, 6, 12, or 18dB (line stage); 40, 60dB (optional phono
stage). Volume control range: 80.0dB. Gain resolution: 0.1dB steps above
23.0 on display (-57dB), 1.0dB steps below 23.0 on display (-57dB).
Input overload: 2V on XLR, 1V on RCA (gain set to +18dB); 4V on XLR, 2V
on RCA (gain set to +12dB); 8V on XLR, 4V on RCA (gain set to +6dB); 16V
on XLR, 8V on RCA (gain set to 0dB). Frequency response: 10Hz-40kHz,
±0.1dB. Input impedance: 100k ohms. Output impedance: less than 10 ohms
on XLR, less than 20 ohms on RCA. Maximum output (main outputs): 16V on
XLR, 8V on RCA. THD+noise: less than 0.001%. Crosstalk: better than
-120dB, any input to any output, input unterminated; better than -140dB,
input terminated. Residual noise: 20Hz-20kHz; better than -120dBV,
input terminated. Mains voltage: 100V, 120V, 220V, 230V, or 240VAC at 50
or 60Hz (factory-set).

Dimensions:
Controller: 19.5" W by 3" H
by 13" D.

Preamplifier: 19.5" W by 3.2" H by 11.4" D.

Shipping weights:

Controller, 60 lbs..
preamplifier, 46 lbs..



 ***   Local pickups only   ***


Thanks
mac