McIntoshMAC6700newMcIntosh MAC6700 Brand new sealedI have a few remaining Mcintosh MAC6700 Receivers in stock brand new in box and sealed. Factory warranty will only apply if purchased in store, otherwise there is no warranty with online transactio...4700.00

McIntosh MAC6700 Brand new sealed

Listing ID: lis9855c Classified 
 Listed  · 266 Views

audiosalonstore 

member since November 2009

AudioSalon  Verified Dealer

Last 12 months
All-time235999.9%

More McIntosh Listings

0 Watchers

Time Left: Listing Sold

This listing has ended.

Condition
NEW
Payment methods

Contact seller after sale to pay viaVISA/Mastercard, American Express or Certified check

Ships fromBoca Raton, FL, 33487
Ships toUnited States
Package dimensions24.0" × 24.0" × 14.0" (80.0 lbs.)
Shipping carrierFedEx
Shipping cost$100.00
Original accessoriesRemote Control, Box, Manual
AverageResearch Pricing

I have a few remaining Mcintosh MAC6700 Receivers in stock brand new in box and sealed. Factory warranty will only apply if purchased in store, otherwise there is no warranty with online transactions. Contact John at Audio Salon for more info.


 

Specifications

ELECTRONIC SPECIFICATIONS

  • Power Output per Channel 200 Watts
  • Number of Channels 2
  • Speaker Impedance 2, 4, or 8 Ohms
  • Rated Power Band 20Hz to 20kHz
  • Total Harmonic Distortion 0.005%
  • Dynamic Headroom 2dB
  • Frequency Response +0,-0.5dB 20Hz to 20kHz
  • Frequency Response, +0, -3dB 10Hz to 100kHz
  • Sensitivity Phono (Moving Coil) 0.25mV
  • Sensitivity Phono (Moving Magnet) 2.5mV
  • Sensitivity High Level (Balanced / Unbalanced) 0.5V/0.25V
  • Sensitivity (Power Amp input) 1.4V
  • Signal To Noise Ratio (Moving Coil) 82dB
  • Signal To Noise Ratio (Moving Magnet) 84dB
  • Signal To Noise Ratio (High Level) 95dB
  • Signal To Noise Ratio (Power Amp input) 113dB
  • Input Impedance (Balanced / Unbalanced) 20K/20K
  • Damping Factor >40
  • Maximum Output (Balanced / Unbalanced) 8V Unbalanced

CONNECTIVITY

  • Balanced Input 1
  • Unbalanced Input 5
  • Phono Input Moving Coil 1 (adjustable loading)
  • Phono Input Moving Magnet 1 (fixed loading)
  • Upgradeable Digital Audio Module No
  • Digital Coaxial Input 1
  • Digital Optical Input 1
  • Digital MCT (DIN) Input 0
  • Digital USB Input 1
  • Balanced Variable Output 0
  • Unbalanced Fixed Output 0
  • Unbalanced Variable Output 2
  • Headphone Output 1/4" High Drive
  • AM/FM Tuner option Included
  • Home Theater PassThru Yes
  • Unbalanced Analog Connector Type Standard
  • Speaker Binding Post Type Standard
  • Service Port 0

DIGITAL AUDIO SPECIFICATIONS

  • Digital-to-Analog Converter (DAC) Type 2-channel, 32-bit/192kHz PCM/DSD
  • Digital Coaxial Input Sample Rate 16-bit, 24-bit/32kHz to 96kHz
  • Digital Optical Input Sample Rate 16-bit, 24-bit/32kHz to 96kHz
  • Digital MCT (DIN) Input Sample Rate N/A
  • Digital USB Input Sample Rate 16-bit, 24-bit, 32-bit/32kHz to 192kHz

FM GENERAL SPECIFICATIONS

  • FM Tuning Range 87.9MHz - 107.9MHz (USA)
    87.5MHz - 108.0MHz (Europe)
    76MHz - 90MHz (Japan)
  • FM Channel Spacing 200kHz (USA, Japan)
    50kHz (Europe)
  • FM Antenna Input 75 ohms, Type “F” Coax connector

FM ANALOG SPECIFICATIONS

  • Useable Sensitivity 2.2uV (18.1dBf)
  • 50dB Quieting Sensitivity 1.5uV (14.8dBf)
  • Signal To Noise Ratio Mono: 70dB
    Stereo: 68dB
  • Frequency Response ±1dB 20Hz to 15,000Hz
  • Total Harmonic Distortion Mono: 0.4%
    Stereo: 0.8%
  • Channel Selectivity 60dB Adjacent Channel
    66dB Alternate Channel
  • Stereo Separation 38dB

AM GENERAL SPECIFICATIONS

  • AM Tuning Range 530kHz - 1710kHz (USA)
    522kHz - 1602kHz (Europe)
    522kHz - 1611kHz (Japan)
  • AM Channel Spacing 10kHz (USA)
    9kHz (Europe, Japan)
  • AM Antenna Input Balanced, RJ45 connector (for use only with supplied McIntosh RAA2 Remote AM Antenna)

AM ANALOG SPECIFICATIONS

  • Selectivity 45dB Adjacent Channel
  • Signal To Noise Ratio 50dB
  • Frequency Response 0dB, -6dB 50Hz to 3,000Hz
  • Total Harmonic Distortion 0.5%
  • Sensitivity 350uV/m

CONTROL

  • Tone Controls Bass and Treble
  • Tone Bypass and Input Assign Yes
  • RS232 Control Input Yes
  • Power Control Output 1 Main, 2 Trigger
  • Rear Panel Data Port 6
  • Rear Panel IR Sensor Input Yes
  • Input Level Match Yes

GENERAL SPECIFICATIONS

  • Vacuum Tube or Solid State Solid State
  • Output Autoformer Yes
  • Output Meters Yes
  • Dual Layer Chassis Yes
  • Chassis Finish Black painted steel
  • McIntosh Monogrammed Heatsinks™ No
  • Power Requirement 120V 50/60Hz, 4.8A
  • Standby Power Requirement <0.25 Watts

WEIGHTS & DIMENSIONS

  • Dimensions (W x H x D) 17-1/2" (44.45cm) x 7-5/8" (19.37cm) x 22" (55.88cm)
  • Weight 76 lbs (34.5 kg)
  • Shipping Weight 94 lbs (42.6 kg)


Audio Salon is located at the Biltmore hotel in Coral Gables Florida just minutes from Miami International Airport. We are certified dealers for McIntosh - Wilson Audio - Dan D'Agostino - Audio Research - The Gryphon - Soulution - VAC - Nagra - Sonus Faber - VTL - Simaudio - Focal headphones - Clearaudio - Koetsu - dCS - Aurender - Bryston  - VPI - Lyra - HRS - Kubala Sosna - Nordost  - Shunyata Research - Wireworld - Cardas Audio - PSB - Marantz - NAD - Pro-ject - REL Acoustic - and many other well established lines. A great selection of the finest audio is always on the floor and available for demo, email John for a private audition. Trades towards new equipment is always accepted and welcomed.

www.audiosalon.net

305 322 8911  

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.