New Channel Islands Audio C-100S Power Amplifier
Listed · 336 Views
0 Watchers
Items from this seller
This listing has ended.
Listings Similar to Channel Islands Audio
Time Left: None
This listing has ended.
Condition | NEW |
Payment methods | |
Ships from | Port Hueneme, CA, 93041 |
Ships to | United States |
Package dimensions | 16.0" × 14.0" × 6.0" (10.0 lbs.) |
Shipping carrier | UPS |
Shipping cost | Free |
Original accessories | Box, Manual |
Average | Research Pricing |
Save $250 on our NEW C-100S!
Specifications
Power Output: 180 watts per channel @ 4 ohms (both channels driven)
100 watts per channel @ 8 ohms (both channels driven)
THD + Noise @ 1kHz: <.006% (1 watt/1kHz)
IMD: <0.005%
Input Impedance: 100k ohms (Teflon insulated RCA jacks)
Output Impedance: .015 ohms (5-way binding posts)
Voltage Gain: 26dB/32dB (user-selectable via external DIP switches)
Input Sensitivity: 1.4V/26dB, 0.7V/32dB
Maximum output current: 14A (per channel)
Power consumption: <15w (idle)/90% efficient @ rated power
Dimensions: 8.5″w x 2.75″h x 10″d (including binding posts, etc.)
Weight: 6 lbs (9 lbs shipping weight)
Handcrafted in USA
Features
- Flat frequency response and phase into any conventional speaker load
- Low distortion which is flat vs frequency
- Ultra low output impedance for excellent control of the loudspeaker
- High efficiency, which results in lower power consumption, low operating temperature, and high reliability
- Compact & light weight package
Power Management
Power is fed by a 400 watt low-noise switching audio power supply, housed in a heavy steel Faraday shield. This complex supply outputs both high voltages/high current to the amplifier output stage and also low voltages for the input stage.
Audio Circuit
Amplifier layout is simple and logical with power supply circuitry at the front of the chassis. This allows very short signal paths with our custom input stage board. Signal enters PCB mounted RCA jacks (no wires), through the JFET input stage, into the UCD amplifier module. The entire signal path from input jack to speaker terminals is about 6”.
Amplifier outputs are conveniently located on the rear panel. Speaker connections can be made in a variety of ways via the insulated 5-way binding posts.
The compact machined aluminum chassis provides heat dissipation for the direct-mounted power supply and audio output circuits. Due to the high efficiency of the circuits, the chassis will only be warm to the touch under normal conditions.
Protection
The C series amplifiers are equipped with a variety of fault protections including DC, over-voltage, and short-circuit. AC Mains Fuse protection is also provided and easily accessible at the power inlet.
5 Year Warranty
Enjoy peace of mind with our comprehensive 5 year warranty. Full service information is included in the product manual.
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Item can be returned within 14 days of receipt.
General Terms
Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.
Refunds
Buyer will receive a full refund in the original payment method less any shipping charges.