PMC MB2S Studio Monitors with Bryston 4B SST Pro Amp

Included in purchase:

• PMC MB2S studio monitors in Neo Black
• Bryston 4B SST Pro Amp in Black (recommended pro amp for monitors)
  
• Studio Stands
  

PMC MB2S

The PMC MB2S-P is high end passive monitor that is perfect for mid sized control rooms either soffit mounted or on it's custom studio stands (included with purchase). Unlike other monitors of this size the MB2S-A allows for high SPL's without distortion.

The PMC MB2S-P includes the PMC 75 mid driver, the Radial low frequency driver that allows for massive controlled excursions whilst avoiding the effects of power compression thanks to its cast alloy exo-skeleton which cools the woofer and it's rear vented magnet.

Every element has been designed and manufactured purely for its performance and encompasses the smallest detail from individual cable choice through to hand selection of capacitors in the active crossover networks. This level of resolution cannot be achieved with standard technology and average tolerances.

PMC MB2S-P Specifications:

• Available Finishes: Neo Black

• Crossover Frequency: 380Hz & 3.8kHz

• Dimensions: H 870mm 34.25" W 380mm 14.96" D 535mm 21.06"

• Drive Units: LF 310mm PMC Radial™ driver, MF 75mm PMC fabric dome , HF 27mm fabric soft dome

• Effective ATL™ Length: 3m 10ft

• Impedance: 4 Ohm Nominal

• Input Connectors: 3 Pairs 4mm Sockets (Tri-wire or Tri-Amp)

• Recommended Amp Power: 200-800W

• Sensitivity: 91dB 1W 1m

• Useable Frequency Response: 20Hz-25kHz Peak SPL @ 1M: 124dB

• Weight: 49kg 108lbs

Bryston 4B SST Pro Amp

The Bryston 4B SST is a high-quality, dual-mono audio power amp that outputs 2 x 300W per channel at 8 ohms.

A legend among audio amplifiers, the Bryston 4B SST attained international acclaim as an amplifier suitable for the world’s finest and most sophisticated sound systems. Whether it's for a recording studio, broadcast facility, home theater installation, or a state-of-the-art stereo system, Bryston remains the first choice among audio professionals, integrators, and audiophiles. The 4B SST is a pure dual-mono design, outputting 300 watts per channel into 8 ohms, 500 watts into 4 ohms, and over 1000 watts in bridged mode. The 4B SST contributes to a wide, 3-dimensional soundstage with the added sense of realism and “being there” in the room with the musicians.

Bryston 4B SST key features and tech:

• Dual-mono 2 x 300W @ 8 ohm, 500W @ 4 ohm, 1,000W bridged

• Soft-start power control circuitry eliminates inrush current

• Power up or turn-on can be activated by remote control voltage

• Balanced or single-ended input per channel

• Each SST channel offers the option of switching between balanced input or single-ended input

• Channel gain 29dB (1v setting for single-ended) or 23dB (2v selected for actively balanced source)

Bryston 4B SST—Under the Hood

The 4B SST has a separate power supply for each channel, featuring two large toroidal transformers mounted near the front panel of the chassis for extra support and balance when the amp is rack-mounted. Each channel has thermal shutdown circuitry to prevent damage due to overheating. The 4B SST uses a magnetic-trip circuit breaker to protect the amplifier.