cary Cinema 11

There are no video ins/outs at all, but more audio jacks than you can shake a stick at: eight pairs of analog stereo inputs (one balanced XLR, seven RCA), eight digital ins (one AES/EBU, seven TosLink or S/PDIF), one 7.1-channel RCA analog input set, one stereo RCA analog output for a second zone, and two sets of 7.1 analog outs (one set balanced XLR, one set RCA). In addition, there are various trigger, sensor link, communication, and upgrade ports, along with an IEC power receptacle and connections for an AM/FM radio antenna. Finally, there's an XLR input for the supplied microphone used for the Cinema 11's Auto Setup and EQ.
Cinema 11 has no video circuits

customize the input names, set analog input levels, configure analog inputs for bypass mode or DSP, program the AM/FM tuner, set up the Zone 2 options, adjust audio delay for A/V sync, and manage other utilities. Then you can either let the Cinema 11 run through its Auto Sound Setup (speaker check, distance, level, EQ, crossover, phase), or perform all such settings manually
For two channel audio, you pretty much have to forgo a subwoofer, but the bass sound is fantastic with good full range speakers.

Frequency response: 2Hz to 96kHz

Total harmonic distortion: 0.008%

Signal to noise ratio: 115dB (line)

Output: 1V (Pre out), 8V (Pre out Max)