Pair of Martin Logan Axis In-Wall Speakers

This is for the Pair... Barely used Martin Logan Axis Speakers. These were the Surround Backs in a 7.1 system and rarely got any use. These speakers sound great as a standalone stereo pair or as part of a surround system. They can be used as fronts or surrounds.
They were removed from my system due to moving and now my new home doesn't have a good place to install them in the wall.
Description from the Martin Logan website:
Axis offers ultra-high-performance from an in-wall and is sized to fit horizontally between 16” studs for the ultimate center channel or left/right application. Two 5.25-inch black aluminum cone woofers and a low-distortion Folded Motion™ XT tweeter provide richly detailed highs, and an open & revealing midrange. Axis’ robust mounting-lock system is coupled with a solid aluminum chassis. When not in use, the constant-control mounting locks are held securely within a self-contained housing. When moved into place during installation, they couple the chassis and add rigidity to the wall. Driver complements are held in place by a flush-mounted 3/4-inch solid high-gloss piano black baffle that hides mounting hardware for customers who want to showcase their speaker without a grille. The Folded Motion Tweeter rotates easily without the need for tools to allow precise sound dispersion either horizontally or vertically and can be performed post-installation. Precision-Built, Advanced-Topology Vojtko™ Crossover Vojtko crossover topology ensures vanishingly low distortion and seamless driver integration. Each crossover is hand-built on a super-thick, double-layered black PC board using the finest polypropylene and low-DF electrolytic capacitors, massive air coils, custom wound inductors and 16-gauge copper wire, with thermal and current protection. Every note and nuance of the audio signal is perfectly preserved.

SPECIFICATIONS
Frequency Response 45–25,000 Hz ± 3 dB Dispersion 80° x 30° High Frequency Driver 1.25” x 2.4” (3.2cm x 6.1cm) Folded Motion XT Transducer with 4.5” x 2.75” (11.4cm x 7cm) diaphragm. Low Frequency Transducer Two 5.25” (13.4cm) aluminum cone with cast aluminum basket. Concave dust cap. Sensitivity 94 dB @ 2.83 volts/ meter Impedance 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers. Recommended Amplifier Power 20–250 watts Crossover Frequency 700 & 2000 Hz Weight 13 lbs. (5.9 kg) Dimensions 15.2” x 7.8” x 3.9” (38.6cm x 19.9cm x 9.9cm) Cut-Out Dimensions 14.4” x 7.1” (36.7cm x 18cm) Depth Required Behind Wall Surface 3.7” (9.4cm) Projection From Wall Surface 0.2” (0.6cm) Specifications are subject to change without notice.