Mark LevinsonJC-2usedMark Levinson JC-2 Classic Preamp, Mint, Tested, GLORIOUS COLLECTORS ITEM**Please be sure and check out our newly launched website with additional items for sale** www.skyfiaudio.com/collections/allMark Levinson JC-2 Preamp with Phono This is a legendary preamp design...2999.00

Mark Levinson JC-2 Classic Preamp, Mint, Tested, GLORIOUS COLLECTORS ITEM

Listing ID: lis9ac6f Classified 
 Listed  · 276 Views

0 Watchers

Items from this seller

Time Left: None

This listing has ended.

Condition
9/10
Payment methods

Contact seller after sale to pay viaCertified check, Personal check, Wire Transfer or Express Checkout

Ships fromGlen Rock, NJ, 07452
Ships toUnited States
Package dimensionsunspecified
Shipping carrierUPS
Shipping costFree
Original accessoriesManual
AverageResearch Pricing

**Please be sure and check out our newly launched website with additional items for sale** www.skyfiaudio.com/collections/all


Mark Levinson JC-2 Preamp with Phono



This is a legendary preamp designed by John Curl and built in the USA by Mark Levinson.  



In my opinion two piece preamps are the way to go.  Keeping the noisy power supply in a separate housing results in the best performance you can get.  Just about every flagship preamp follows this design philosophy.   Thats the first thing you’ll notice about this unit... the power supply is housed separately and linked by a super high quality mill spec umbilical cable that clicks into place. 



You’ll notice that this pre uses Camac/Fischer connectors.  Many believe that these laboratory grade connectors are the way to go but unfortunately ML could not persuade the industry to change over.  The good news is that I have included two sets of converters one for the out put and one for the input. These are readily available for sale if you need more. 



On the inside you’ll notice that ML loves to use modules for the input and output stages.  You’ll find a bunch in this unit including the phono section.  These solid potted units ensure the lowest noise floor and greatest reliability and thermal stability.  You’ll also notice the super high quality potentiometers and switches.  Its rare that I see a vintage preamp that doesn’t not require the pots to be cleaned.  This unit was dead quiet and scratch free as you turn the volume and balance.  



Cosmetically then unit is super clean and does not have any noticeable signs of wear or use.  The lettering is intact, the face plate is beautiful and its been obviously well cared for and a true survivor.  



All functions work as they should and has been tested thoroughly on my bench.  Its super quiet and very composed.  



Here are some of the features they promote on their literature



Hand matched active components


Special thermal epoxy potting compound for modules


1% low noise metal film resistors


1% tolerance polycarbonate capacitors in audio path


Gold plated contacts and switches 


Teflon insulated wiring throughout 


Conductive plastic input and output pots


Aluminum anodized chassis throughout 



On the literature it states that this preamp was available with several optional phono boards.  Im uncertain which model is installed but it seems to have the correct gain for both MC and MM inputs and internal switches for loading the cartridge.  Im sure a savvy connoisseur will chime in with the details. 



 This unit belonged to a well known speaker designer from the 70s and is well documented.  It comes with the most comprehensive document set I’ve seen in a vintage piece.  Included are the original manual, large fold out brochure, power supply instructions, second brochure, cable assembly instructions etc.  



Here is your chance to own a piece of audio history which is sure to appreciate over the years. 




---

This item will be professionally packaged and insured for safe transit to your home.   

If we don’t have the original manufacture's packaging, we use heavy duty double ply corrugated boxes with Instapak expanding foam custom inserts.  In many cases this has proven to be better than the original packaging.  We also use high quality fiber reinforced tape to seal our packages.  Lightweight items will be bubble wrapped and shipped in a high-quality box. 

This item is available for pickup in Ridgewood, NJ or Union Square, NYC (with convenient parking in the building).

NJ Residents or anyone picking up without a resale certificate will need to pay NJ Sales Tax.

Use the Buy It Now button and we will cover the PayPal fees.

Thanks for looking and be sure to call or text 646.852.2073 with any questions. 

Please also be sure and visit our Audiogon e-store to see the rest of the items we have for sale www.audiogon.com/stores/skyfi

**And be sure to check out our newly launched website with additional items for sale** www.skyfiaudio.com/collections/all

---

WHO WE ARE 

Skyfi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of select high end audio equipment.  We only buy equipment the we admire and are passionate about. No mid-fi, no gimmicks, and no junk. 

Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. If it does not meet or exceed the original manufactures specifications, it will not be sold.  We are very selective about the equipment we purchase, focusing on mostly analog, high-build quality, American, and European built units.

Through our sister company, which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Project, and Sony ES, we have access to OEM parts, service, and support.  If you are local and are looking for any new equipment for the above-mentioned manufacturers, please drop us a line as we can arrange both sales and professional installation in the tri-state area

PURCHASING GUIDELINES

We do not accept or review any offers that do not go through the official Audiogon system. We have too many items for sale and its nearly impossible to keep track of offers outside of the official system. Please don’t message, email, or text any offers. 

If you do not see a “Make an Offer” button, it means we are not considering any offers on that item.   

PAYMENTS

We prefer working through PayPal, which allows you to use a credit card or bank transfer. We do not charge extra for any payment fees if you purchase the item at the asking price.  You can also send us a personal check (which will need to clear before shipping), certified check, money order, or wire transfer. International clients without access to PayPal should use a bank wire transfer. 

If you are picking up an item, we do not accept PayPal.  You must pay in person with cash, certified or bank check, or wire transfer.  If you make a PayPal payment and are picking up the item, it will be returned. 

TRADE IN POLICY 

We accept trade-ins of equal or lesser value under certain conditions.  Simply ask and let us know the exact model, condition, and the accessories that are included.  Such as the original box, remote, manual, etc.  We will only consider high-end equipment from mainstream manufacturers such as McIntosh, Mark Levinson, Audio Research, Krell, etc. and will typically pass on displays, projectors, receivers, dated processors, and mid-fi equipment of any type.  We will offer a fair value for your equipment, but keep in mind we are running a business and will need to be able to resell the equipment at a profit after investing a great deal of time and resources in testing, certifying, repairing, cleaning, and packaging the incoming equipment.  If you are looking for top dollar we suggest attempting to sell it directly to an end user on your own.

SELL US YOUR GEAR (Working or Broken)

We will also purchase your used or broken gear and arrange pickup if you are in our local market.  Just drop us a note for a quote but be sure to include the condition and what is included. 

HOW TO VISIT US

We are currently operating from a residence in Ridgewood, NJ.  You are welcome to make an appointment if there is a piece of equipment you would like to see in operation before or after purchase.  We have a well-equipped, dedicated listening room with tons of equipment of all makes and models.  We are not a store, so please don’t make an appointment if you are just curious as to how a speaker or piece of equipment sounds.  In essence, no tire kickers please.

If you are in NYC and cannot make it out to Ridgewood, we can arrange pickup in Union Square (14th Street) after the purchase.   You can call or text 646.852.2073 with any questions or to schedule an appointment.  We can also arrange to install, calibrate, and tune the gear in your listening room if you are local to the area.  This is super useful when purchasing large speakers or heavy amplifiers.  It is also great for ensuring your new turntable is setup correctly in its final resting place.  

Thanks for looking and please send us your email address if you would like to receive a list of the equipment we receive from time to time.  We promise not to bombard you with junk email.   

V1.6

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.