ATI AT527NC 7-Channel Amplifier Using Hypex NCore® technology

ATI AT527NC 7-channel amplifier in excellent condition. Fantastic sounding amp and extremely well built. The amp uses the highly regarded Hypex N-Core Class D output modules. The amp is rated at 200W RMS per channel at 8 ohms and 300W RMS at 4 ohms.
The unit will be shipped double-boxed.
SUMMARY: Amplifier Output: Hypex N-Core NC-500 Class D amplifier modules with ATI's custom input buffer insures edge-of-the-art operation
Toroid Transformers: 40% more efficient than EI type. Each transformer has two bi-filar windings to assure low noise and crosstalk.
Soft Start Circuitry: New micro-processor control for automatic AC power recognition, configuration and turn-on delay reducing in-rush current to a minimum Protection Circuits: Optically - coupled with full automatic reset
Circuit Boards: Double-sided, FR-4 glass-epoxy, computer-grade boards are assembled in-house
New and novel “sleep” circuit: When there is no input signal for a period of 10 minutes, power is removed from the output modules and a front-panel LED begins to flash. As soon as an input signal is detected on any channel, normal playback operation resumes instantaneously.
Remote Trigger: Activated from 3.3VDC to 24 VDC via a heavy-duty relay
Power Cord: 20A IEC power inlet with detachable, 3-wire cord.
SPECS:

• 7-channel amp
• 200W RMS at 8 ohms, 300W RMS at 4 ohms (FTC Full Bandwidth Output Power)
• 250W at 8 ohms, 375W at 4 ohms (EIA 1kHz Output Power)
• Signal-to-Noise Ratio “A-Weighted” >123 dB
• Total Harmonic Distortion (20 Hz – 20 kHz) 0.02%
• Intermodulation Distortions (IMD) <0.03%
• Damping Factor >5000
• Crosstalk Greater than 100 dB from 20 Hz – 20kHz
• Input Sensitivity for Full Rated Output 1.6 volts
• Voltage gain through RCA or XLR 27.8 dB
• Slew Rate >60V/µSec
• Input Impedance 47 kΩ
• Dimensions 17 x 5.75 x 15.5 (inches)
• Net Weight 65.5 lbs.