Mark LevinsonNo. 585usedMark Levinson No. 585 - Integrated - 200 Watts Class A/B - 32/192 DAC - Customer Trade-In!!!For sale is a customer trade-in of the Mark Levinson No. 585 Integrated Amplifier. This integrated is very powerful and flexible with many useful features such as an asynchronous USB Hi Res DAC Se...5500.00

Mark Levinson No. 585 - Integrated - 200 Watts Class A/B - 32/192 DAC - Customer Trade-In!!!

Listing ID: lis9ed7e Classified 
 Listed  · 3174 Views

nextlevelhifi 

member since April 2007

Next Level HiFi  Verified Dealer

Last 12 months
All-time783100.0%

24 Watchers

Time Left: Listing Sold

This listing has ended.

Condition
8/10
Payment methods

Contact seller after sale to pay viaVISA/Mastercard, American Express, Certified check, Personal check or Wire Transfer

Ships fromWayne, IL, 60184
Ships toUnited States
Package dimensionsunspecified
Shipping carrierFedEx
Shipping costFree
Original accessoriesRemote Control, Box
AverageResearch Pricing

For sale is a customer trade-in of the Mark Levinson No. 585 Integrated Amplifier.  This integrated is very powerful and flexible with many useful features such as an asynchronous USB Hi Res DAC Section, HT Bypass, A/B Output Stage, etc. 

The unit is in very good condition less a few superficial blemishes (see photos) and hence we have rated the unit an 8 of 10 condition.  The unit was purchased new from an authorized Mark Levinson Dealer and has been kept in a dedicated listening room.  The unit comes with the original double factory packaging, remote, power cord, handling gloves, manual, tool kit, etc.   Moreover, the unit comes with a spare/second remote for the new owner.  


Here are the specifications from Mark Levinson's website: 
 
The foundation of the No585 is its fully discrete, mirror-imaged, dual-monaural analog circuitry featuring individual signal switching relays for each of its four stereo inputs: one XLR and three RCA. Volume controls use discrete 15-bit R-2R ladders and low-noise analog switches for the widest possible bandwidth and maximum signal integrity. The fully-differential Class AB power stage includes an oversized 900VA toroidal transformer with individual secondary windings for the left and right channels. Each elegantly simple amplifier channel utilizes twelve output transistors and multiple smaller local capacitors that allow them to be placed physically closer to the amplifiers for greater transient response when power is needed immediately. This robust architecture results in a conservative power rating of 200W per channel with stability into 2 ohms. System integration and expansion are possible using the stereo RCA preouts which can operate full-range or with an included switchable, second-order, 80Hz crossover filter allowing for seamless integration into 2.1-channel systems with powered subwoofers.

Nº585

PRINT SPECIFICATIONS

AMPLIFIER SECTION

Output Power: 200W RMS per channel @ 8 Ω, 20Hz – 20kHz

Damping Factor: >400 @ 20Hz, referred to 8 Ω

Frequency Response: 20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dB

Signal-to-Noise Ratio: >98dB (20Hz – 20kHz, unweighted); >103dB (20Hz – 20kHz, A-wtd), referred to full output – maximum volume setting

Voltage Gain: 40.7dB (maximum volume setting)

Total Harmonic Distortion: <0.01% @ 1kHz, 200W, 8 Ω; <0.1% @ 20kHz, 200W, 8 Ω

PREAMPLIFIER SECTION: ANALOG

Input Impedance: >45k Ω (RCA & XLR)

Input Overload: >5.5V RMS (RCA & XLR)

PREAMPLIFIER SECTION: DIGITAL

Sample Rates/Bit Depth: PCM: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz/up to 32-bit; DSD: Native, single- and double-speed

GENERAL

Analog Audio Connectors: 3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended line outputs (RCA); 1 pair loudspeaker outputs ("Hurricane" binding posts w/banana sockets that accept spade lugs with 1/4" (6.3mm) spacing up to 1/8" (3mm) thick)

Digital Audio Connectors: 1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos-Link); 1 asynchronous USB input (USB-B)

Control Connectors: 1 RS-232 port (RJ-12 connector); 1 IR input (1/8" phone jack); 1 programmable 12V DC trigger output (1/8" phone jack), 100mA maximum; 1 programmable 12 DC trigger input (1/8" phone jack); 1 Ethernet port (RJ-45 connector)

Mains Voltage: 100V AC, 115V AC, or 230V AC (factory-set)

Power Consumption: Maximum 1000W (power on)

Unit Dimensions (H x W x D): 6.9" (175mm) – without feet; 7.59" (193mm) – with feet x 17.25" (438mm) x 19.95" (507mm)

Packaging Dimensions (H x W x D): 19" (483mm) x 26" (660mm) x 26" (660mm)

Weight: 72 lb (32.6kg) – net; 96 lb (43.4kg) – with packaging

Our Company:

Next Level Audio & Video is a premier retailer of the world's finest HiFi products. We operate by appointment and offer our clients the opportunity to experience systems not heard elsewhere. We are proud to support our business partners including: Aavik, Ansuz, Børresen, Dynaudio, Focal, Kudos, Naim, Nordost, Octave, Raidho, Rega, REL, Scansonic & Soulution.   

  
Payment can be made by Check, Cash, Money Order, Credit Card, or PayPal. Credit Card or PayPal adds 3% to the total.    
  
Illinois Residents add 7% to the total.  

Local pickup is available as well.

Feel free to contact us at the following for questions, appointment requests, and or orders:   
  
o: 630-830-0390

c: 630-246-0390

f: 630-830-0395  

e: [email protected]  

w: www.nextlevelav.com  

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.