Aurum Cantus V8F AND Aurum Cantus SW10 Subs

Full Package of Speakers and Subs... Matching Piano Gloss finishish... Really works of art.
These are virtually new. I purchased them from an AD 6 Mos ago at over $7k. There is one small ding in the paint at bottom I did when positioning them, and one of the plastic grill stays on one of the grills came off, they are in the closet anyway.. ... they are HEAVY. Otherwise, not broken in yet. Stunning Cherry finish, gold spikes, Bi Amp speaker jacks.
NOTE: I will add the pair of Aurum Cantus SW10 Subs! These Subs are in same virtually new condition and in the beautiful Cherry finish as the speakers.
They 6Moons Review
Technical data:

• Design：3-way vented-box
• Frequency Response：35Hz-40kHz
• Sensitivity (2.83V/1m)：88dB
• Impedance：8 ohms (minimum 6.4 ohms)
• Power Requirement：50-250W recommended
• Tweeter：Model: G1. Purified aluminum ribbon tweeter, the size of aluminum ribbon(LWT):150mm×14.5mm×0.01mm. High power handling, high output, shielded design, easily field-replaceable for the ribbon.
• Midrange: Model: AC165AVM/50SC, 1×165mm (6.5″). Aluminum frame, the sandwich cone of Non- woven carbon fiber+Cell+Non-woven carbon fiber, 50mm (2″) copper clad aluminum voice coil with flat wire, the special magnet system with Faraday ring and demodulation coil,120mm×20mm Y30 Ferrite magnet.
• Woofer：Model: AC200AVM/75C2C, 1×200mm (8″). Aluminum frame, the sandwich cone of Non-woven carbon fiber+Cell+Non-woven carbon fiber, 75mm (3″) copper clad aluminum voice coil with flat wire，the special magnet system with Faraday ring and demodulation coil,170mm×22mm Y30 Ferrite magnet.
• Crossover Frequency：150Hz and 2100Hz
• Crossover’s Attenuation Slope：Woofer -12dB, Midrange -12dB, Tweeter -18dB
• Crossover Components：M-Cap Supreme MKP capacitors are used for crossover oftweeter, Aurum Cantus MKP capacitors and nonpolarity electrolytic capacitorsare used for the crossover of midrange and woofer. Also, high purified OFC inductors and the metal oxide film resistors with military industrial standard.
• Connective Cable：Teflon insulated OCC cable
• Damping Material：The polyester fiber and the PU foam
• Connections：4 pcs 18mm gold-plated copper connectors, Bi-wiring
• Cabinet Material：High quality MDF
• Finish: Cherry PE high gloss Piano finish
• Dimensions (HWD)：1100mm×352mm×462mm (43.3″×13.86″×18.19″).
• Net Weight：53kgs/pc (116.85lb/pc)

Technical data:

• Design：Active subwoofer system with rear port design.
• Frequency response：28Hz—114Hz±3dB
• Low frequency limit value：20Hz(88dB)
• Frequency range of the crossover：40Hz-160Hz (adjustable)
• Average output sound level: 96dB(25Hz—62Hz)
• The maximum sound pressure level of output: 106dB(55Hz)
• Species evenness of pass band：93%
• Drive units：254mm(10in) diameter, NOMEX compound material cone, long throw.
• Dimensions：Height: 458mm(18.03in), (exclusive of removable spikes)
• Width：335mm(13.19in)
• Depth：500mm(19.69in),(inclusive of the radiator of the amplifier)
• Finish：Cabinet：high gloss Piano paint finish Cherrywood
• Net weight: 30kg/66 1b
• Amplifier: Type：Class B
• Maximum undistorted power output: 200W (80HzTHD 0.45%4 ohms)
• Input impedance：≥47kohms
• Harmonic distortion：≤0.45%(12.5W80Hz/4 Ohm)
• Signal Noise：90dB
• Function：Level/volume control–crossover frequency control – automatic control – phase control - low gain control.
• Input terminals: Line level，high level/speaker level.
• Output terminals: Line level，high level/speaker level.
• Low pass filter: Active second order, variable crossover point.
• High pass filter: Passive first order, variable crossover point.