Audio ResearchD300 Solid State AmplifierusedAudio Research D300 Solid State AmplifierAudio Research D300 Solid State Amplifier The D200, D300 and D400MKII use similar means to achieve a common goal of musicality at different power levels. In the case of the D200 and D300, the gener...1097.00

Audio Research D300 Solid State Amplifier

Listing ID: lis9g3bg Auction 
 Listed  · 442 Views

20 Watchers

Items from this seller

Time Left: None

This listing has ended.

Condition
8/10
Payment methods
Ships fromPlantation, FL, 33325
Ships toUnited States
Package dimensions23.0" × 17.0" × 12.0" (48.0 lbs.)
Shipping carriersUPS or FedEx
Shipping cost
Log in to see price
Original accessoriesManual
AverageResearch Pricing

Audio Research D300 Solid State Amplifier

The D200, D300 and D400MKII use similar means to achieve a common goal of musicality at different power levels. In the case of the D200 and D300, the general circuit topology is identical with quantitative differences applying in power-supply energy storage and number of output devices (see specifications for details). The D400MKII, while largely similar in design, also has some features which are uniquely its own.

The D200 and D300 both employ a distributed-capacitor approach to bulk energy storage for the main supply; this means that a number of high-quality electrolytics are linked in parallel to provide the energy reserves necessary to reproduce clean transients and dynamic peaks of accurately-recorded music. This design approach results in lower E.S.R. (a distortion characteristic of capacitors) and lower impedance (quicker delivery of power to the output stage when need ed). The D400MKII, while using larger capacitors for more total energy storage, also incorporates a second power trans- former dedicated solely to supplying the input stage of the amplifier. This approach gives both the input stage and the main supply of the amplifier tremendous dynamic headroom the capability to cleanly deliver power in the face of demanding program material and low- impedance speaker loads.

The D200, D300 and D400MKII all use direct-coupled, high- current Multiple-Emitter Transistors (or METs) in their output stages (as well as for input-stage drivers). These devices have the rugged, high- heat, high-current capability of single emitter bipolar transistors (which can have a rougher, harder sonic character), but they also have a natural sweetness and musicality often associated with MOSFET transistors (which can be more fragile and prone to failure). In short, the METs deliver the best of both worlds. Each of these amplifiers has heat sinking specified to generously handle the dissipation requirements of its respective output stage, allowing safe, convenient in-cabinet installation if desired.

The D200, D300 and D400MKII each have both single-ended and balanced (XLR) input connectors, allowing easy connection to preamplifiers having either type of output. In addition, the D400 MKII offers a second set of inverting single-ended inputs, thereby allowing balanced operation in two different modes. Bridged mono operation, yielding substantially higher power output, is also possible with each of these three amplifiers, in either single-ended or balanced mode. Illustrated bridging instruction are included in the owner's manual for each model.


INSPECTED BY HOLLYWOOD SOUND - CONDITION 8/10


Power output: 160 watts per channel into 8 ohms, 300 watts per channel into 4 ohms. Power bandwidth: (-3dB points) DC to 150 kHz into 8 ohms. Frequency response Input sensitivity 1.9V RMS for rated output (25.7 dB gain) unbalanced or balanced. Input impedance150K ohms unbalanced, 300K ohms balanced differential. Output taps Output regulation 0.07dB 8 ohm load to open circuit Overall negative feedback 21dB Damping factor 130 : Distortion Slew rate50V/µs : Rise time1.7 µs Hum & noise Less than 60 µV RMS (116dB below rated output IHF A-weighted) Power supply energy storage175,000 µF total Power requirements105-125VAC 60Hz (210-250VAC 50Hz) 520 watts at rated output (165WPC 8 ohms), 890 watts at 300WPC 4 ohms, 1000 watts maximum, 200 watts idle. Other Input Polarity: Non-inverting at unbalanced inputs. Balanced pin 2+ (IEC-268)
Dimensions: 19" (48 cm) W (standard rack panel) x 7" (17.8cm) H x 12 7/8" (32.7 cm) D (front panel back). Handles extend 1½" (3.8 cm) forward of the 3/8" thick front panel. Output connectors extend 1" behind rear panel. Weight 48 lbs. (21.8 kg)
SEE PHOTO OF ADDITIONAL AUDIO EQUIPMENT FOR SALE

BUYER PAYS SHIPPING AND 2.9% PAYPAL FEE

ITEM HAS BEEN INSPECTED BY HOLLYWOOD SOUND (QUALITY REPORT ABOVE)

SOLD AS IS - NO RETURNS ACCEPTED

HAVE QUESTIONS??? WE'RE HAPPY TO ANSWER THEM.
SHOOT US A MESSAGE AND WE'LL ANSWER YOU PROMPTLY.
HAPPY SHOPPING! - THE SAVITZ MUSIC FAMILY

Questions for the seller
Any rust????
No rust. Machine is in great condition! Kept in a cool, dry room.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.