Crown DC300A

See my other listing for the matching pre-amp. Cleaned and tested by Alpha-Tech

Output Power 300 watts per channel minimum RMS (both channels oper- ating) into an 8 ohm load over a bandwidth of 1 Hz-20KHz at a rated RMS sum total harmonic distortion of 0.05% of the

Frequency Response 1 KHz Power Harmonic Distortion

I.M. Distortion (60Hz-7KHz 4:1)

Slewing Rate

Damping Factor Output Impedance Load Impedance Voltage Gain

Input Sensitivity Output Signal

fundamental output voltage.

±0.1dB DC-20KHz at 1 watt into 8 ohms; ±ldB DC-100KHz.
180 watts RMS into 8 ohms, per channel, both channels operating, 0.1% total harmonic distortion.

Less than 0.001% from 20Hz-400Hz. and increasing linearly to 0.05% at 20KHzat 155watts RMS per channel into 8 ohms.

Less than 0.05% from 0.01 watts to 0.25 watts and less than 0.01% from 0.25 watts to 155wattsinto 8 ohms, per channel.

8 volts per microsecond (slewing rate is the maximum value of the first derivative of the output signal, or the maximum slope of the output signal).

Greater than 750, DC-400Hz into 8 ohms.
Less than 7 milliohms in series with less than 3 microhenries.
Rated for 8 ohm usage; safely drives any load Including completely reactive loads. 20.6±2% or 26.3±0.2dB at maximum gain.
1.75 volts±2% for 155 watts into 8 ohms.
Unbalanced, dual channel.