ShinolaThe Runwell TurntableusedShinola Runwell Turntable in Silver / Black Finish, Store DemoThe Runwell Turntable is designed inside and out for the discriminating audiophile and easy to use by any music enthusiast. Featuring a built in phono preamplifier and a belt driven pulley with spe...1250.00

Shinola Runwell Turntable in Silver / Black Finish, Store Demo

Listing ID: lis9h1g0 Classified 
 Listed  · 191 Views

paragonss 

member since April 1999

Paragon Sight & Sound  Verified Dealer

Last 12 months
All-time2928100.0%

4 Watchers

Time Left: Listing Sold

This listing has ended.

Condition
8/10
Payment methodsContact seller

Contact seller after sale to pay viaVISA/Mastercard, American Express, Discover, Certified check, Personal check or Wire Transfer

Ships fromAnn Arbor, MI, 48103
Ships toUnited States
Package dimensionsunspecified
Shipping carriersUPS or FedEx
Shipping costSpecified after purchase
Original accessoriesBox, Manual
AverageResearch Pricing


The Runwell Turntable is designed inside and out for the discriminating audiophile and easy to use by any music enthusiast. Featuring a built in phono preamplifier and a belt driven pulley with speeds of 33 1/3 rpm and 45rpm, every component and element of the Shinola Runwell Turntable is carefully sourced from manufacturers across the globe, then built at the Shinola Audio factory within the flagship Detroit store.

About this product

Terrific condition store demo Shinola Runwell Turntable in Black & Silver finish. Turntable in original box with factory mounted Ortofon 2M Blue cartridge, built-in phono preamplifier, owner's manual, quick start guide, RCA cables, and power cord.

Turntable is rated 8/10 for minor cosmetic wear consistent with demo use.

SPECIFICATIONS
Wow and Flutter: < 0.1%

Gain: 35.4DB @ 1kHz

RIAA Conformance Deviation: Less than +/- 0.25DB, 20Hz to 20 kHz, exclusive of ultrasonic filter at 13HZ

Input Overload: > 200MV at 1kHz

Input Impedance: 47KOHM in parallel with 200PF

Signal-to-noise Ratio exclusive of cartridge intrinsic noise, unweighted: >82DB

Gain: 1kHz MM 35.4DB (Jumpers open); 1kHz MC 55.1DB (Jumpers installed)

Termination impedance, MM gain resistive: 47KOHM, via synthetic cooled termination

Equivalent temperature of 47kohm input termination, midband: < 20 degrees Kelvin

Termination impedance, capacitive: 200PF on board

Termination impedance, MC gain resistive: Installed on input pads per cartridge requirements

EQ characteristic: RIAA Standard

Infrasonic filter: Second-order maximally-flat, -3DBR AT 13Hz
Line-level output resistance: 49.9 OHMS, unmated

Overload margins: > 32DB at any frequency from 20Hz TO 20kHz, based on reference levels of 5MV RMS at 1kHz, 500UV RMS at 20Hz, 50MV RMS at 20 kHz

Output noise, MM gain, at various analyzer filter bandwidths and 75 ohm generator Z: 22Hz TO 22kHz: 22UV RMS; 100Hz TO 22kHz: 12UV RMS; 400hZ TO 22kHz: 8.6UV RMS

Output noise, MC gain, 10 ohm generator Z: 22Hz TO 22kHz: < 220UV RMS; 100Hz TO 22kHz: < 120UV RMS; 400Hz TO 22kHz: < 86UV RMS

Power consumption from mains input, preamp only enabled: < 8W

Distortion at noise-versus-distortion inflection point: < 0.001%

Dimensions: 18” X 13.875” X 7.5”

Additional Information
Please call 734.662.3595 and ask for Richard if you have any questions about this product. We make every effort to update our ads quickly when inventory fluctuates, but we encourage you to call and check product availability, as we are also a brick and mortar store.

For a complete listing of all of our specials, please visit: https://www.paragonsns.com/product-category/preowned-specials/

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.