McIntosh MT2 Turntable - Excellent condition - One Owner - Purchased on Dec. 2018 - Light Use
Listed · 603 Views
5 Watchers
Items from this seller
This listing has ended.
Listings Similar to McIntosh
Time Left: Listing Sold
This listing has ended.
Condition | |
Payment methods | |
Ships from | Coconut Grove, FL, 33133 |
Ships to | United States |
Package dimensions | 20.75" × 18.5" × 15.0" (35.0 lbs.) |
Shipping carrier | UPS |
Shipping cost | $95.22 |
Original accessories | Box, Manual |
Average | Research Pricing |
Excellent condition - One Owner - Purchased on Dec. 2018 - Smoke-free house - Current product
https://www.mcintoshlabs.com/products/turntables/MT2The McIntosh MT2 Precision Turntable combines the latest in turntable technology and design to deliver both superb performance and accurate playback. The MT2 is a great way to upgrade your home audio system to play vinyl albums. A full complement of features allows for all recordings to be reproduced with flawless realism. Its advanced electronic and mechanical design will give you many years of smooth, trouble-free operation. A subtle green glow emanates from under the platter and the outside edges of the plinth for a touch of refined ambiance.
The MT2 plays both 33-1/3 and 45 rpm records. It’s virtually ready to use out of the box with just a few setup steps to complete and then you’ll be enjoying your vinyl in no time.
-
CARTRIDGE SPECIFICATIONS
- Cartridge Type Moving Coil, High Output
- Output Level 2.5 mV at 5 cm/s
- Load Impedance 1000 Ohms recommended (Preamp MC Input)
- Frequency Response 20Hz to 50kHz
- Channel Separation 35dB at 1kHz
- Compliance 15 x 10-6 cm/dyne
- Recommended Tracking Force 2.0 g
- Channel Difference Less than 0.5dB at 1kHz
- Total Mass 6.3 g
- Stylus Elliptical Diamond
- Cantilever Material Aluminum
TONEARM SPECIFICATIONS
- Bearing Sapphire and Ceramic
- Arm Tube Dural-Aluminum
- Counterweight Eccentric
- Adjustments Vertical Tracking Angle, Antiskate, Azimuth
TURNTABLE SPECIFICATIONS
- Playback Speeds 33-1/3 and 45 rpm
- Motor Type DC Motor with Stainless Steel Brushes
- Speed Control Servo System
- Platter Dynamically balanced polyoxymethylene (POM)
- Platter Bearing Polished and tempered steel shaft in sintered bronze bushings
- Signal To Noise Ratio 35dB - 40dB
- Wow & Flutter 0.15% - 0.25%
CONNECTIVITY
- Stereo Outputs Unbalanced 1
CONTROL
- Power Control Input 0
- Power Control Output 0
- Platter Light N/A
- Speed Control Fine Adjustment Yes
GENERAL SPECIFICATIONS
- Dust Cover Included Yes
WEIGHTS & DIMENSIONS
- Dimensions (W x H x D) 17-13/16" (45.2cm) x 5" (12.7cm) (6" (15.2cm) with dust cover) x 17" (43.2cm)
Note: Tone Arm Height will vary depending on the type of Cartridge installed. - Weight 29 lbs (13.2 kg)
- Shipping Weight 39 lbs (17.6 kg)
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.