Lindemann 832 Balanced Preamp with Remote

"FULL DISCLOSURE: The extremely minor scratches on this otherwise pristine and exceptional Lindemann 832 preamp are very, very faint and located only on the top panel. The front face is clean. Nevertheless, according to Audiogon's grading scale, having 3 to 4 minor scratches warrants a 6/10 rating, thus the declaration. Thank you very much for your viewing."

Signal processing within the world-renowned Lindemann 832 is fully balanced throughout.
Unbalanced input signals are converted to balanced. Even the volume control and
output stages, which use premium components from the world of professional
audio, are fully-balanced designs.

The preamplifier is built on a 4-layer printed circuit board.
Perfect channel symmetry is achieved using layout techniques specially
fine-tuned for audio, such as the mirrored dual-mono configuration and
sophisticated grounding scheme. These contribute greatly to the preamp’s more
than 120 dB channel separation, which is one of the secrets of the 832’s
holographic imaging.

The 832 is easy and intuitive to operate using the controls on
the front panel or the system remote. Information on the active input, the
output level, and other current settings is available at any time from the
easy-to-read display.

In the AMP setup, parameters such as gain, balance, monitor,
absolute phase, maximum volume, mute level and display brightness can be
changed to suit individual requirements. The inputs of the 832 are freely
configurable: their name, gain and absolute phase may be altered to suit the
source component. Unused inputs can be removed from the selection.

The 832 can be incorporated into a home cinema system without any
problem. To do this, simply switch the input to the 0dB setting and the signal
will pass from the input to the line out without any change in level.