Sonus Faber Olympica II

Demo speakers, lightly used.  In great shape! We're a factory dealer.

Contact us for cash-n-carry price.  Pallet shipping recommended.

TECHNICAL
SPECIFICATIONS

System

3-Way floor standing, paralaminar stealth flow vented loudspeaker.

Cabinet

Enhanced “Lyre shape” design, progressive thickness triple curvature cabinet
walls damped spread resonance spectrum system. Solid walnut vertical clamps
employed.



Tweeter

Sonus faber “Arrow Point” DAD (Damped Apex Dome), is a synthesis of the classic
dome and ring transducer 29XTR2. A Sonus faber designed 1.1” (29mm) moving coil
driver. The ultra dynamic linearity is given by the new Neodymium motor system.



Midrange

Sonus faber M15XTR, a new Sonus faber designed 6” (150mm) ultra dynamic
linearity mid-woofer is used. CCAW wire is used on a composite former “eddy
current free” voice coil. The dynamically linear magnetic field motor
incorporates triple Kellog/Goeller rings. A special custom diaphragm is made
with a real time, air-dried, non-pressed blend of traditional cellulose pulp,
kapok, kenaf and other natural fibers developed by ear according to the most
natural sound. To further inhibit any residual cone coloration we are using a
transparent viscous surface damping coating. Special coaxial anti-compressors
are used, designed to remove cavity resonance and distortions.



Woofer

Sonus faber woofer W18XTR is a direct descendant of the 8.75” (220mm) speaker
used in “Aida”. The lightweight “sandwich cone made from a blend of a synthetic
foam membrane and coated with cellulose pulp are voiced to blend with the
midrange drive units and exhibit its same sonic characteristics. The result is
absolute definition and coherency in the critical mid frequency range. A
long-throw motor system with a 1.5" diameter controlled "eddy
current" voice coil is implemented for high speed, dynamic performance and
linearity.



Crossover

Non-resonant “progressive slope” design, optimized amplitude/phase response for
optimized space/time performance. “Paracross topology” on both the tweeter
hi-pass and midrange band-pass. Crossover points are 250Hz -2.5kHz.



Frequency Response

40 Hz – 30.000 Hz, tuning port included.



Sensitivity

88 dB SPL (2.83 V/1m).



Nominal
Impedance

4 ohm.



Suggested
Amplifier Power Output

50W – 250W, without clipping.



Long-Term
Maximum Input Voltage (Iec-268-5)

20V rms.



Dimensions

41.6 x 14.6 x 18.6 in. / 1055 x 370 x 472 mm



Weight
(pair)

150 lbs / 68 kg - net weight

156.6 lbs / 71 kg - shipping weight



Finishes

Walnut