McIntosh MA-252 Integrated Hybrid Amp ~ Like New
Listed · 649 Views
This listing has ended.
Listings Similar to McIntosh
Time Left: Listing Sold
This listing has ended.
Condition | |
Payment methods | |
Ships from | Vancouver, British Columbia, V6B0B9 |
Ships to | United States and Canada |
Package dimensions | unspecified |
Shipping carrier | FedEx |
Shipping cost | $185.00 |
Original accessories | Remote Control, Box, Manual |
Average | Research Pricing |
Up for sale is McIntosh MA252 integrated hybrid tube amp. This unit is in absolute like new condition. I have put no more the 15 hours on it since buying it new late last year and unit is not even broken in. Used a second setup so I don't longer needed. Hybrid Design with preamp stage that has 2 x 12AX7 &. 2 x 12AT7 tubes. The power output is solid state with a strong 100 W into 8 ohm & 160 W into 4 ohm. This MA252 has Tone Controls if you feel the need so you can tailor to your liking. Part of the Tone Control is the Input Trim, with this you can balance out the volume so that when you change source the volume will be the same. Each source is independent of the other. I think this is great if your adding a turntable to the set up. Has Sub Out, also Phono Stage from Moving Magnet or a high output Moving Coil. Has Balanced and Single Ended inputs. Comes with original box, manual and remote. Price is Firm and will only ship to Paypal confirmed address in lower 48 States. Serious buyer only please. Thanks!
ELECTRONIC SPECIFICATIONS
- Power Output per Channel 100 Watts into 8 Ohms
160 Watts into 4 Ohms - Number of Channels 2
- Speaker Impedance 4 or 8 Ohms
- Rated Power Band 20Hz to 20kHz
- Total Harmonic Distortion 0.03%
- Dynamic Headroom 1.8dB
- Frequency Response +0,-0.5dB 20Hz to 20kHz
- Frequency Response, +0, -3dB 10Hz to 100kHz
- Sensitivity Phono (Moving Coil) N/A
- Sensitivity Phono (Moving Magnet) 3.0mV
- Sensitivity High Level (Balanced / Unbalanced) 0.6V/0.3V
- Sensitivity (Power Amp input) N/A
- Signal To Noise Ratio (Moving Coil) N/A
- Signal To Noise Ratio (Moving Magnet) 80dB
- Signal To Noise Ratio (High Level) 97dB
- Signal To Noise Ratio (Power Amp input) N/A
- Input Impedance (Balanced / Unbalanced) 20K/20K
- Damping Factor 8 Ohms: >200
4 Ohms: >100 - Maximum Output (Balanced / Unbalanced) 8V Unbalanced
CONNECTIVITY
- Balanced Input 1
- Unbalanced Input 2
- Phono Input Moving Coil 0
- Phono Input Moving Magnet 1 (fixed loading)
- Upgradeable Digital Audio Module No
- Digital Coaxial Input 0
- Digital Optical Input 0
- Digital MCT (DIN) Input 0
- Digital USB Input 0
- Balanced Variable Output 0
- Unbalanced Fixed Output 0
- Unbalanced Variable Output 0
- Headphone Output 1/4" High Drive
- Subwoofer Output 1 (mono)
- AM/FM Tuner option No
- Home Theater PassThru No
- Unbalanced Analog Connector Type Standard
- Speaker Binding Post Type Standard
DIGITAL AUDIO SPECIFICATIONS
- Digital-to-Analog Converter (DAC) Type N/A
- Digital Coaxial Input Sample Rate N/A
- Digital Optical Input Sample Rate N/A
- Digital MCT (DIN) Input Sample Rate N/A
- Digital USB Input Sample Rate N/A
CONTROL
- Tone Controls Bass and Treble
- Tone Bypass and Input Assign Yes
GENERAL SPECIFICATIONS
- Vacuum Tube or Solid State Preamplifier: Vacuum Tube
Power Amplifier: Solid State - Output Type Direct Coupled
- Output Meters No
- Dual Layer Chassis Yes
- Chassis Finish Polished stainless steel
- McIntosh Monogrammed Heatsinks™ Yes
- Power Requirement 120V 50/60Hz, 3.7A
- Standby Power Requirement <0.5 Watts
WEIGHTS & DIMENSIONS
- Dimensions (W x H x D) 12" (30.5cm) x 7-5/8" (19.4cm) x 18" (45.7cm)
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.