Zesto Audio Leto Ultra Pre-Amp BRAND NEW

 This was purchased for a personal system.  Decided to go another route for the personal system.  

This is a new unit not opened.  
The unit speakes for itself just look it up a read the numerous reviews.
Feel free to call:
UniQue Home Audio LLC 727-487-1869  Please note we are not a dealer for Zesto Audio   

From Manufacturer

Specification

Inputs

• 6 Inputs with remote or manual controls
• 3 sets of true transformer Balanced inputs (pin 2 hot) with an impedance of 10K Ohms
• 3 sets of Single Ended inputs with an impedance of 100K Ohms
• Maximum input level of 7 Volts RMS

Outputs

• 4 Line outputs
• 2 sets of true transformer Balanced outputs (pin 2 hot) with an impedance 150 Ohms
• 2 sets of Single Ended outputs with an impedance 150 Ohms
• Maximum peak output level of 10 Volts RMS
• 2 Independent ground lift switches on the left and right outputs

Presence

• 6 position remote or manual Presence control
• Presence  0,-1, -2, -3, -4, -5 (low pass shelf)
• 0 = Not engaged
• -1 = 13Khz and above
• -2 = 8Khz and above
• -3 = 4Khz and above
• -4 = 2Khz and above
• -5 = 1KHz and above
• When the unit is turned on, or you switch inputs, the presence control will go to “0”
• Presence control defaults to 0 which disengages from the circuit

Gain

• 3 remote controlled Gain settings of 9dB, 6dB and 3dB 
• Manual Gain switch on rear panel 
• Gain setting is saved on each input

Detailed Specifications

• Remote control Input, Volume, Mute, Mono, Presence and Gain settings
• All adjustments can be operated manually (just in case the remote is misplaced)
• Frequency response 10Hz to 40Khz ~ 2dB
• Distortion ~ 0.013% with 1V RMS input
• Signal to noise ~ 100dB below operating level
• Non inverting output polarity
• Cross talk >90dB
• 1% metal film resistors throughout
• Polypropylene capacitors throughout the audio path

Vacuum Tubes

• Two (2) Gold pin JJ ECC82/12AU7
• Two (2) Gold pin JJ ECC832/12DW7
• High quality gold pin ceramic sockets

Other Features

• Each unit is hand made in the USA
• 50 hour factory burn in on all circuits and vacuum tubes
• Dimensions 17”w X 12”d X 5”h
• Weight 28 lbs.
• Shipping weight 30 lbs.(12.70 kg)
• Shipping box: 21”w x 21”d x 11”h (53.34cm x 53.34cm x 27.94cm)
• 16 gauge zinc plated steel enclosure
• Two year limited warranty
• Six months warranty on Vacuum Tubes
• Recessed RCA and XLR connectors are Gold plated with an isolated ground.
• All switches and knobs are easily accessible, nothing hidden inside to adjust.