Garrard 301 Power Supply Unit

Now you can use any Garrard 301 or 401 turntable with any voltage 120 or 240V and with any Pulley Wheel 50 or 60 Hz.
This Power Supply works with any Garrard 301 or 401 & Thorens TD124 TD135
And for example UK version Garrad 301 240Volt 50Hz sounds better(motor run smoother and quieter)
than Garrard 301 US version 120V.
Why? because double windings of motor  Garrad 301 can not be absoultly the same
How two strings cannot be tuned to one frequency absolutely, and therefore beats always occur.
Another situation with two windings connected in series -240Volt(=120V+120V)
There is no imbalance
With this PSU you can use UK Garrard 301/401 in U.S.A.  (with main 120V 60Hz)

UK producer describes: This very versatile unit is a pleasure to use and makes  a 301 and 401 reach its potential.
The unit allows the user to lower the line input voltage going to the turntable down a level where no vibration can be heard from the motor. Surprisingly the Garrard motors RPM can still be maintained on a lower voltage . Best results are obtained with the Eddy brake magnet out of the way of the disc or even removed as with this PSU its not required anymore as all speed selections and alterations are done by the PSU controls.
So by lowering the line voltage right down and making fine adjustments with the HZ control it  is possible to tweak the motor to just perfect performance and the net result is consistent speed stability and virtually non existent  mechanical noise .
You can forgot about any spindle 50 or 60 Hz, PSU can control any Garrard 301/401 50 or 60 Hz made.

A smooth consistent  sine wave makes the motor run smoother and quieter  
These units have dual voltage  UK and USA  240/120 selection is done  with a voltage selection switch.

In Ivory or BLACK COLOR Check my eBay items https://www.ebay.com/itm/254545103618