Octave Audio V-40 SE and MC Phono Stage

Sunny Components Inc,
Tue, Wed, Thur, Fri 10.00am-6.00pm.Sat-10am-4pm Closed on Sunday and Monday.

1370 E Cypress St Ste D,E Covina CA-91724 USA
Tel: 626-966-6259. Fax: 626-966-5467. Cell: 626-975-1353.
Email: [email protected]. 
Store website: www.sunnyaudiovideo.com

( more items available on our SHOP Page:  https://sunnyaudiovideo.com/shop )

Some of the finest products built in America & Europe, combined with the 
finest service and know how and expert setup from Electrical power to 
the finest Audio stands, electronics speakers turntables and streaming. 

Selling a pre-owned Octave Audio V40 SE with MC Phono stage integrate amp.
The unit is in black finish.

It will be packaged in an original box.  

We can also add a Technics SL-1200g or SL-1200GR table to this package at a 15% Demo Discount.
We do not have a remote control for this unit.
Works great with many speakers in the store. Get 10% - 20% off on demo speakers in the store.

Here's a good review on this integrated. https://www.soundstagehifi.com/index.php?option=com_content&view=article&id=257:octave-audio-v-40-se-integrated-amplifier&catid=55:full-length-reviews
V 40 SE | The All-rounder

The V 40 SE is a
line level integrated amplifier with 2 x 40 W peak output power. He is a
further development and direct descendant of the successful V 40 and V
50 amplifier models. His powerful, clear bass fundamentals and his
captivating resolution in the high frequencies win much respect. His
unique features lift the V 40 SE into the 21st Century, while his
performance earned him the rare “Stereoplay Highlight” (issue 07-2009),
a prestigious award bestowed by the German high-end audio magazine Stereoplay.

The V 40 SE output stage consists of two power
pentodes (Type 6550) for each channel. Due to the BIAS Control and
Monitoring System, the use of other pin-compatible output tubes is
possible to match the amplifier to personal taste, or to benefit from
new or improved tubes.

Like all OCTAVE Amps the, V 40 SE is based on the
enhanced pentode configuration. This configuration ensures the absolute
stability of the amplifier against the unstable impedance of the
loudspeaker. Impedance mismatch is without consequence, and the V 40 SE
is stable down to a 2 Ohm Load. An important contributor to this
stability is the single impedance output transformer.

The V 40 SE is the perfect amp for speakers with an
average efficiency rating.But not only is the low impedance capability
an advantage, with his exceptional Signal-to-Noise ratio of –110dB /
Full Power he is also an ideal partner for high efficiency
loudspeakers.


 






Basic Model
 
V 40 SE Line


Tube Complement
 
4 x 6550


Design
 
Aluminium silver or Aluminium black


Options
 



Black-Box and Super Black Box

 
Spezifications
 
 
 





 
Power Output
 
2 x 40 Watt into 4 Ohm
 





 
Frequency Response
 
20 Hz – 70 kHz @ 40 W -1 / -3 dB

5 Hz – 70 kHz @ 10 W -0 / -2 dB
 





 
Total Harmonic Distortion
 
< 0,1% @ 10 Watt into 4 Ohm
 





 
Signal-to-Noise Ratio
 
-110 dB / 40 W
 





 
Noise / Ripple
 
< 300 μV
 





 
Optimum Speaker Impedance
 
3 – 16 Ohm
 





 
Minimum Speaker Impedance
 
2 Ohm
 





 
No-load current
 
28 mA - BIAS low, 34 mA - BIAS high
 





 
Connections
 

Inputs: 4 x Line Level (Cinch)

Outputs:1 x Tape

Pre-Out and Main-In

 


 
Features
 

ECO Mode, Bias Adjustment, Power Management

 


 
Configuration
 

Push Pull Pentode Circuit

Negative Grid Voltage adjustable for each tube

with 3 turn Precision Regulators,
Wideband Output Transformers using Silicon steel PMZ Core,
single Impedance Output,
Optimum Load Impedance 3 - 10 Ohm
Nominal Speaker Impedance,

Effieciency greater than 85dB,

Amplifier remains stable with
No Load and Output short circuited

 



Credit card and Paypal add 3.5% fee