Musical Fidelity A1008 Integrated Amplifier
Listed · 1799 Views
18 Watchers
Items from this seller
This listing has ended.
Listings Similar to Musical Fidelity
Time Left: None
This listing has ended.
Condition | |
Payment methods | |
Ships from | The Colony, TX, 75056 |
Ships to | United States |
Package dimensions | unspecified |
Shipping carriers | USPS, UPS or FedEx |
Shipping cost | $50.00 |
Original accessories | Remote Control |
Average | Research Pricing |
Excellent Musical Fidelity A1008 Integrated Amplifier for sale. Original owner, demo unit purchased from local authorized Musical Fidelity dealer. Hybrid design with 6922 tube preamp stage and powerful solid state amplification. Has an excellent integrated DAC and MM/MC Phono stage. Original remote, Power Supply Unit interconnects and power cord included.
Description:
The A1008 is a 250 watts per channel remote controlled, two box design, with the second box housing a very large choke regulated power supply to keep all magnetic interference away from the amp stage and DAC. The main chassis also houses a very fine 24 bit, 192k upsampling DAC that is comparable to Musical Fidelity's best DAC's. In addition to 2 coaxial and one optical inputs it also has a USB input to run your computer thru.
The amp circuit used in the A1008 is the same as the $10,000 KW-550, other than the 3db less power of that 500 watt monster. With 250 watts into 8 ohms and 400 into 4 ohms the 1008 will drive virtually all speakers.
The preamp stage is the same tube based preamp as used in the $10,000 KW-550. It has 4 line inputs as well as a high quality phono stage that will handle both MM and MC cartridges. It also has a line out to run subwoofers and a home theater pass thru to integrated the 1008 into a home theater system and use its front amps to run your front speakers. There is a fixed out and digital outs for recording as well.
MSRP: $6000
Manual can be downloaded here: https://www.musicalfidelity.com/uploads/manuals/English/a1008int.pdf
Specs of the A1008 are as follows:
-Output Voltage RMS: 45 Volts 20Hz to 20 kHz
-Output Voltage-Peak-to-peak: 127.3 Volts
-Output Power: 250 Watts per channel into 8 Ohms (24dBW), 400 Watts per channel into 4 Ohms
-Current peak-to-peak: 75 Amps
-Damping factor: 140
-Output devices per channel: 4
-Pre-out impedance: 50 Ohms
Line input specs
-THD + N, 20Hz to 20 kHz: 100dB A weighted
-Input sensitivity for 250W: 330mV
-Input impedance: 220K Ohms
-Overload margin: 26dB
-Channel separation: >70dB typical
-Frequency response: 20Hz-20 kHz (+0/-0.2dB)
DAC specs
-DAC design: 24 bit Delta-Sigma dual differential 8X over sampling
-Total correlated jitter: 105dB 20Hz to 20 kHz
-Signal/noise ratio: >117dB A weighted
-Total harmonic distortion: 96dB ‘A’-weighted
-Input sensitivity: 2.5mV (MM), 0.5mV (MC)
-Input impedance: 47K Ohms (MM and MC)
-Overload margin: 24dB (MM and MC)
Connections
-Line level inputs: 4 pairs line level RCA connectors, 1 pair phono (MM/MC) RCA connectors
-Line level outputs: 1 pair RCA [preamp] controlled by the volume, 1 pair RCA [tape record] fixed line level
-Digital inputs: 1 USB 1.1 [32, 44.1, 48 kHz sample rates] for computer only 2 S/PDIF (RCA), 1 optical (TOSLINK)
-Digital outputs: 1 S/PDIF (RCA), 1 optical (TOSLINK)
-Speaker outputs: 1 pair 4mm banana plug posts per ch.
Dimensions
Main unit: 17"w x 5"h X 15.75d inc terminals
Weight: 30.4 pounds
Power supply: 10"w x 5"h x 15"d
Weight: 21.3lbs
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Item can be returned within 14 days of receipt.
General Terms
Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.
Refunds
Buyer will receive a full refund in the original payment method less any shipping charges.