Mytek MANHATTAN II - VERY NICE CONDITION!
Listed · 723 Views
This listing has ended.
Listings Similar to Mytek
Time Left: None
This listing has ended.
Condition | |
Payment methods | |
Ships from | Chicago, IL, 60657 |
Ships to | United States and Canada |
Package dimensions | unspecified |
Shipping carrier | UPS |
Shipping cost | Free |
Average | Research Pricing |
In VERY nice condition. Includes factory Apple remote control.
Original box, and packing are not included.
We would rate this closer to an 8.5.
We are an authorized Mytek dealer.
Was a Manhattan I, but has been FACTORY UPGRADED TO THE II VERSION.
An amazing feature rich piece and one of our favorites: The 32-Bit MQA Decoding, 32-Bit/384kHz PCM, Quad DSD256, and DXD Conversion, Unsurpassed Sabre 9038 DAC: Mytek Manhattan II DAC/Headphone Amp Sets the Reference for High-Res Sound.
Born in a professional recording studio, and bringing both MQA sound and mastering-engineer sound quality into the home by way of the world’s highest-performance Sabre 9038 DAC chipset, the reference-level MyTek Manhattan II DAC/headphone amplifier elevates high-resolution audio to edge-of-your-seat thrilling heights. While retaining the same chassis, power supply, and front-panel circuits as the award-winning original model, the Stereophile Product of the Year, Editors’ Choice Awards-winning, and Class A+ Recommended Manhattan II uses a top-to-bottom-redesigned main board that yields substantially improved detail, resolution, and transparency. Manhattan II also features a built-in MQA decoder that allows you take advantage of TIDAL Masters and any MQA files. Conversion support for PCM up to 32-bit/384kHz, native DSD up to Quad DSD256 (11.2MHz), and DXD complement a whopping 130dB dynamic range, world-class analog preamp attenuators, a 32-bit integer Class 2 USB2 driverless interface, and the latest in digital connectivity. But that’s not all.
Manhattan II’s trademarked Femto Clock Generator reduces jitter and the noise floor to below-measurable levels. Bi-metal fabrication and two separate isolated power supplies for the analog and digital stages further contribute to performance distinguished by vivid realism, multi-dimensional imaging, standout purity, and impeccable balance. A high-current, 500mA dual-output, dual-mono headphone amplifier turns headphones into luxurious aural spas. RCA and balanced XLR analog outputs further expand Manhattan II’s flexibility, as does as an optional Roon-ready network card that turns this stellar component into a streamer. A remote control, easy-to-upgrade firmware, and a two-year manufacturer’s warranty pile on the spoils. So does its appearance. Reflecting the cutting-edge architecture of its namesake, The Absolute Sound Editors’ Choice Award-winning Manhattan II sounds as gorgeous as it looks. The penthouse of DACs, Manhattan II will give you multi-million-dollar views on your music.
"It’s one of those rare, forceful beasts that realistically express the energy behind the music and proactively enable pattern recognition, doing so with beguiling ease and morgue-like silence. It also sounded uniquely non-digital. ...Class A all the way."
– Stereophile, Class A+ Recommended Product
"When you couple the Manhattan II’s digital capabilities with its excellent analog features, you have a special component that should remain viable in both mastering and recording studios as well as in music lovers’ systems for many years to come. That is value."
– Steven Stone, The Absolute Sound, Editors’ Choice Award
SPECS:
Digital Conversion:
PCM up to 384k/32bit
MQA
DSD (Native) up to DSD256, DXD
Dynamic Range: 130dB
MQA Hi-Res Decoder: Built-In Certified Hardware MQA decoder Digital Inputs:
1x USB-2 Class 2 (OSX, Linux driverless, all formats)
1x AES/EBU (PCM up to 192k, up to DSD64 DOP)
3x S/PDIF (up to 192k PCM, up to DSD64 DOP)
1x SDIF3 DSD up to DSD256 (Dual Coax link, uses two of the S/PDIF inputs above)
1x Toslink/ADAT
Analog Inputs: (Direct to analog output, minimal signal path)
2x RCA Line In (Pr), #1 is switchable to Phono (with Optional Phono Card installed)
1x XLR Balanced (Pr)
Analog Outputs: (simultaneous output, 50Ω impedance)
1x RCA (Pr)
1x XLR (Pr) (Pin 2, Hot)
Headphone Amp: Reference High Current, High transient, 500mA@6W, 0 Ω output impedance Headphone Jacks:
1x TRS Stereo (6.5mm, 1.4") in absolute phase
1x TRS Stereo (6.5mm, 1.4") out of absolute phase
1x Balanced output (requires special Mytek adapter and uses both headphone jacks) Built-In Attenuator:
1dB Stepped Analog Attenuator or
1dB Stepped Digital 32bit Attenuator or
Purist Audiophile relay bypass
Word Clock: Mytek "Femto-clock Generator" (0.82ps internal jitter) Word Clock Connections:
1x Input (BNC)
1x Output (BNC)
Remote: Included (uses RC5 Standard)
Optional boards: (Sold Separately, User Installable)
Ultra High Performance MM/MC Phono Board
Roon-Ready Network/WiFi Card (supports Roon, Airplay, DLNA/UPNP, Spotify Connect, iOS & Android)
Firmware: Upgradable via USB Control Panel App (Win and Mac) Power Supply: Switchable 115/230VAC (50/60Hz)
Dimensions (WDH): 17" x 10.5" x 1.95
These is on display and ready to be auditioned in our showroom. If you are in the Chicagoland area, please come by and take a look and listen.
Saturday Audio Exchange has been in business for 39 years!
We buy, sell, and trade new and used home audio equipment. If you have something you think we might be interested in, shoot us a message.
Local pickup is always welcome. We ship using UPS ground. If an item is too big we ship it freight. Local pickup customers and Illinois residents are subject to Chicago sales tax (10.25%). All shipments are fully insured and international deliveries must have their full value declared.
We ship and accept PayPal or a credit card ONLY from USA and Canada customers.
Thanks for looking!
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.