Torus Power RM-60 Bal AVR Toroid Transformer

Original owner, box, manual. Also included is the 240 V cable I used. It is very heavy, about 180 lb, so a local pickup would work best.

This model takes 240 V input and produces 110 V output.

Torus AVR – Description
Torus Power AVR (Automatic Voltage Regulation) is a full-feature state-of-the-art power conditioner, isolating and protecting your system. Like all Torus Power products, the AVR series provides true isolation (using massive toroidal transformers) and protects all connected equipment from the risk of severe power line surges using series-mode surge suppression. In addition, Torus AVR provides stable voltage to keep equipment running in the optimal range of 115VAC to 125VAC for any input voltage from 85V to 135VAC for 120V input and 170V to 270VAC for Balanced 240V input.
Torus Power AVR series uses a micro-processor to monitor and control the power provided to connected components. The front panel display on the Torus Power AVR indicates input and output voltages, and displays output current, as well as displaying fault conditions.
The Torus Power AVR is pre-programmed to power down the system when a high or low fault conditions occurs (user can over-ride).
There are multiple interfaces built into the Torus Power AVR:
1) Ethernet interface with built-in web browser allows any computer to view voltage and current readings and turn the AVR unit on or off.
2) RS-232 is provided for connection to media control systems.
3) Two 12V triggers are provided.

Original owner, box, manual. Also included is the 240 V cable I used. It is very heavy, about 180 lb, so a local pickup would work best. Note this model takes balanced 240 V power, and outputs 110 V power.

Torus AVR – Description Torus Power AVR (Automatic Voltage Regulation) is a full-feature state-of-the-art power conditioner, isolating and protecting your system. Like all Torus Power products, the AVR series provides true isolation (using massive toroidal transformers) and protects all connected equipment from the risk of severe power line surges using series-mode surge suppression. In addition, Torus AVR provides stable voltage to keep equipment running in the optimal range of 115VAC to 125VAC for any input voltage from 170V to 270VAC for Balanced 240V input. Torus Power AVR series uses a micro-processor to monitor and control the power provided to connected components. The front panel display on the Torus Power AVR indicates input and output voltages, and displays output current, as well as displaying fault conditions. The Torus Power AVR is pre-programmed to power down the system when a high or low fault conditions occurs (user can over-ride). There are multiple interfaces built into the Torus Power AVR: 1) Ethernet interface with built-in web browser allows any computer to view voltage and current readings and turn the AVR unit on or off. 2) RS-232 is provided for connection to media control systems. 3) Two 12V triggers are provided.

TORUS RM 60 BAL POWER CONDITIONER
Balanced 240V input is provided from two x 120V phases and supplies highest power capability and noise cancellation. The toroidal isolation transformer steps-down the 240V input to 120V to power the equipment. Where 240V is unavailable, the higher power units may be configured for 208V operation. Balanced 240V input does not require the use of failure-prone Ground Fault Circuit Interruption (GFCI) devices.