Bel Canto S300iU Integrated Amp with USB DAC

For sale is my one owner Bel Canto S300iU integrated amplifier with USB DAC. This is a great amplifier with 150 WPC into 8 ohms and 300 WPC into 4 ohms. It has 5 RCA inputs, 1 USB input, a Line out and Record out. The sound is full and sweeter than you'd expect for digital, this is a terrific amplifier with plenty of power. It's been driving my B&W 804D speakers without breaking a sweat. Plenty of rhythm, clarity, bass and midrange.

S300i box contents include the following:
1 - S300i Integrated Amplifier
1 - S300i User’s Guide
1 - Power cord [6.6’ - 2 meters long]
1 - Remote Control
1 – Warranty Sheet

Bel Canto S300i Integrated Amplifier with USB DAC Specifications

Preamplifier Section:

Bandwidth • DC-200KHz
Volume setting for unity gain • 80.0
Signal to Noise Ratio @ 2 Volt RMS • >95 dB A weighted, 20Hz-20kHz
Input overload • 10 V RMS
Output Impedance • 500 Ohms Single Ended,
Input Impedance • 10K Ohms Single Ended
Maximum Gain • 20dB/10X
Maximum Preamp Output Level • 9.5 V RMS

Amplifier Section:

Power Output • 150W/channel 8 ohms, 300W/channel 4 ohms
Minimum rated load impedance • 4 ohms
Frequency Response • 20Hz-20kHz, +/- 0.5dB
THD+N • 0.01%, 1W, 1KHz, 4 ohms
IMD (CCIF) • 0.002%, 1W, 14:15KHz, 4 ohms
Output Noise • 90uV A-weighted 20Hz-20KHz
Voltage Gain • 27dB
Damping Factor • >1000
Output Impedance • <8 milliohms
Dynamic Range • 111dB
Output Connection • 2 sets Safety 5-way Binding Posts

Idle power draw • 15 Watts
Power Requirements • 100-120 VAC 50-60 Hz or 220-240 VAC 50-60 Hz
Dimensions • 8.5” W x 12.5” D x 3” H (216 mm x 318 mm x 75 mm)
Weight: • 12lbs. (5.5 kg)

Rear Panel Connections

Inputs 1-4 accept standard line level RCA
signal from any signal source. Input 5 is
a USB DAC.

Line Out can be used to drive a powered
sub-woofer or second amplifier. It is controlled by the front panel volume control.

Record Out is a fixed level pass-through of
whatever input is selected.

Speaker Output Connections: Attach your
loudspeakers to the output connectors.

IEC power cord jack: Connect a heavygauge power cord from this jack to the
wall power supply.