Bel Canto DesignDAC-3usedBel Canto Design DAC-3 24/192 Upsampling DACBel Canto Design DAC3 with original box, packing, two remotes (original and newer model) and power cord. It's packed and ready to ship. The DAC has been upgraded with the DAC3.7's digital input boa...850.00

Bel Canto Design DAC-3 24/192 Upsampling DAC

Listing ID: lis8b1fc Classified 
 Listed  · 5750 Views

3 Watchers

Items from this seller

Time Left: None

This listing has ended.

Condition
8/10
Payment methods
Ships fromSt Paul, MN, 55104
Ships toUnited States
Package dimensions19.0" × 15.0" × 8.0" (15.0 lbs.)
Shipping carrierFedEx
Shipping cost
Log in to see price
Original accessoriesRemote Control, Box, Manual
AverageResearch Pricing

Bel Canto Design DAC3 with original box, packing, two remotes (original and newer model) and power cord. It's packed and ready to ship. The DAC has been upgraded with the DAC3.7's digital input board (a $350 upgrade). This eliminates the original 16/44.1kHz USB input and replaces it with a super high rez ST optical. Unit is in great condition with a slight bit of discoloration on the front panel knob (see picture).

Digital inputs include 2x S/PDIF coax inputs (one RCA, one BNC), one balanced AES/EBU, one TOSLINK and the ST glass optical. All inputs are 24/176-192 compatible. The ST optical input is perfect for computer use with a Bel Canto U-Link or REF Link (connected via ST glass optical).
Both balanced XLR and single ended RCA analog outputs are offered. The max output level is 4.5V RMS from the XLR outputs and 2.25V RMS from the RCA's. Unit has built in volume control and can be connected directly to a power amp(s). Push button on the back selects between variable and fixed output.

Specifications

Digital Section:
16/32 to 24/192 Inputs: AES 110ohm XLR, SPDIF 75ohm BNC and RCA, ST (AT&T) glass optical & TOSLINK
All inputs are galvanically isolated from the internal circuit and chassis grounds.
Master Clock jitter: 2 picoseconds RMS, 25 picoseconds Peak-Peak
Analog Section:
Maximum Output: 4.5Vrms balanced XLR, 2.25Vrms RCA
Output Impedance: 200 ohms balanced XLR, 500 ohms RCA
Frequency Response: 20Hz-20kHz, +/- 0.5dB
THD+N: 0.0015%, 4.5Vrms balanced Out, 1KHz
IMD (CCIF): 0.0005%, 19:20KHz
Output Noise: 3uVrms A-weighted 20Hz-20KHz
Dynamic Range: 125 dB A-weighted 20Hz-20KHz
Power On usage: 15W
Power Off usage: 0.0W
Internally Set Operating Voltages: 100-120VAC or 230-240VAC 50/60 Hz Power
Dimensions: 8.5” W x 12.5” D x 3” H (216 mm x 318 mm x 75 mm)
Weight: 14lbs. (6.5 kg)

I'll cover the 3% PayPal fee

Bel Canto e.One DAC3 D/A processor

"You've got to hear it!"

I had e-mailed Cantus producer Erick Lichte last March to discuss the progress I was making assembling the performances for the choir's new CD Cantus, which is scheduled for release this fall. But instead of talking about nuances of performance and splices and mixes, Erick was raving about the new Bel Canto DAC3 he'd borrowed from a local dealer to audition at home.

"I was floored! It was so involving. I was also so impressed with what they are going after with this product. . . . This kind of device, like my Benchmark DAC1, is not only the Swiss army knife of audio, but also one of the only future-proof source components you can buy these days. This piece made me excited about audio again."

Now, the sensible Erick lives in sensible Minnesota; I'm not used to such a lack of restraint from him, let alone a lack of restraint involving a product category—the standalone digital-to-analog processor—that has been out of fashion for some years.

Fads and fashions sweep the audiophile world at regular intervals, some of real value, others offering mixed benefits. With hindsight, it looks as if the introduction of separate digital processors in the first half of the 1990s was the latter rather than the former. Yes, moving the sensitive D/A circuits into a separate chassis, isolated from the widely varying power-supply demands of the disc-transport mechanism, would allow those circuits to perform at their optimum—but against that is the fact that, if not correctly implemented, the S/PDIF and AES/EBU datastreaming formats can introduce timing uncertainties that can degrade the noise floor of the decoded analog signal. (See "Bits Is Bits," by Malcolm Hawksford and Chris Dunn, in the March 1996 issue.) In the worst case, the cure was worse than the disease, but it may just have been that the unpredictability of the sonic result, coupled with the need for extra wires and system complexity, put paid to the product category. There were also the market death of DVD-Audio and the lack of an in-the-clear data output from SACD players, neither of which helped the situation. With the almost complete absence of high-resolution data sources, it should come as no surprise that we listed just a page and a half of D/A processors in our 2007 Buyer's Guide.

That's not to say that, when correctly engineered, a standalone digital processor can't give superb sound quality. My reference for digital playback since I bought the review sample in 1993 has been the Mark Levinson No.30. It held on to its position in my system through its No.30.5 and No.30.6 upgrades, and its measured performance and sound quality have come under serious challenge only in recent years. But—and it's a big but—that high-end performance came with an equally high-end price tag. Originally priced at $13,954 in 1992, the two-chassis No.30 had risen to $16,950 by the time I reviewed the No.30.6 revision in 1999, and $17,500 by the time it was discontinued, at the end of 2003.

The No.30 cost so much because Levinson's engineers had made heroic efforts to wrest the maximum performance from what was available in the parts bin at the time of its design and redesigns (that, and its expensive styling). But as the chip foundries have produced progressively better parts over the years, it should be possible, perhaps even probable, that a current-day digital processor designed with modern parts could approach or even surpass the performance of the mighty Levinson at a lower price.

Which brings me back to Bel Canto's e.One DAC3, which costs $2495.

The DAC3 . . .
. . . is one of Bel Canto's e.One series of components, and is a relatively small device. Its half-width front panel features a central green display and, to its right, a black volume-control knob, both housed within a radiused recess. At the top of the rear panel are the IEC AC mains jack and five digital inputs: a transformer-coupled AES/EBU input on an XLR jack; two transformer-isolated electrical S/PDIF inputs, one on an RCA jack, the other on a BNC jack; a TosLink optical jack; and a standard USB port. (The last is said to be galvanically isolated so that electrical noise on a computer's ground doesn't affect the DAC's performance.) There are two pairs of analog outputs: a balanced pair on XLRs and an unbalanced pair on RCAs. A small pushbutton selects between fixed and variable output level.

Inside the black-painted steel chassis, the audio circuitry is carried on a single lead-free printed-circuit board behind the rear panel. A second board carries the quite beefy power supply, this based on two toroidal transformers and four voltage regulators mounted on heatsinks. A small PCB mounted vertically behind the front panel contains the display and control circuits, while another small board behind the rear panel's digital input jacks carries the ground-isolating data transformers and the USB receiver. The last is based on a Burr-Brown PCM2903 chip, which includes both 16-bit A/D and D/A converters, though here it appears to be used to convert the USB datastream to S/PDIF, clocked by an adjacent crystal. The selected input datastream is sent to the ubiquitous Cirrus Logic CS8416 receiver chip.

The heart of the DAC3 is a Burr-Brown PCM1792 two-channel DAC chip, a CMOS type with a specified 24-bit resolution using BB's Advanced Segment DAC architecture. (The six most significant bits are processed by a conventional D/A section; the 18 least significant bits are decoded by a five-level delta-sigma D/A section running at 64 times the clock speed.) The chip has onboard digital attenuation and a soft mute, both of which are used by Bel Canto, as well as slow- or fast-rolloff reconstruction filters. It will also process DSD data, though Bel Canto doesn't implement that option. Although the PCM1792 will handle data sampled over a wide range of frequencies (10–200kHz), Bel Canto runs it at a fixed sample rate of 192kHz, feeding the chip from the output of a high-quality asynchronous sample-rate converter chip, a Cirrus CS8421, which upsamples the coming data. This topology is increasingly popular—I've seen it used in processors from Benchmark and Musical Fidelity—because it provides an additional stage of jitter reduction. Bel Canto also describes the DAC3 as using a proprietary Ultra-Clock circuit, a master clock generator with very low levels of jitter.
The DAC3 uses a single PCM1792, though it should be noted that the chip can also be used in dual-differential mode (one per channel) to give 3dB lower noise and thus greater resolution. The DAC's four current outputs (left hot/cold and right hot/cold) are each transformed into a voltage signal by what appears to be a combination of a high-precision Caddock resistor (footnote 1) and a Linear Technology high-speed op-amp; this stage in turn feeds the output stage, which is based on high-quality Burr-Brown OPA1632 differential-output op-amps.
Sound
I mainly used the e.One DAC3 taking an AES/EBU digital feed from my Ayre Acoustics C-5xe universal player and a TosLink feed from my Slim Devices Transporter network player. I auditioned only the balanced outputs, mostly using them set to Fixed Level.

Though not to the standard set by the Ayre playing well-recorded SACDs such as our May 2006 "Recording of the Month," Daniel Gatti and the Royal Philharmonic performing Tchaikovsky's Symphony 6 (Harmonia Mundi HMU 807394), CDs played back through the Bel Canto had silky-smooth high frequencies. The violins on the CD layer of the Tchaikovsky disc were as natural-sounding as I've heard from 16-bit digital. Even recordings whose high frequencies have been definitely overcooked, such as Queen's Live at Wembley '86 (CD, Hollywood HR-61104-2)—great music in dreadful sound—sounded smoother than I'd expected.

At the other end of the spectrum, low frequencies didn't have quite the extension or the impact of the Levinson No.30.6, but that's hardly surprising: the long-discontinued Levinson, with its massive separate dual-mono power supply, remains unrivaled in that area, in my experience. But I had to give the nod to the far-less-expensive Bel Canto when it came to midrange and treble purity. There was a sweetness to its presentation that allowed the music to communicate more directly.

This hadn't been achieved by the processor smearing detail or muffling the highs. In fact, the DAC3 dug deep into recordings with which I am well familiar to bring into contrast aspects of the mix that I had recognized without fully appreciating. For example, in the coda to "Beyond and Before," from Yes's eponymous 1969 debut album (CD, reissued as Rhino R2 73786), reverb tails appeared on the guitar and organ, with the result that the images of those instruments moved noticeably back in the soundstage. On the same album, there was the subtle doubling of Tony Kaye's piano figure by vibes in the final measures of "Yesterday and Today," and the peculiar, hi-hat–dominant balance given Bill Bruford's swing-tinged drums on the cover of the Byrds' "I See You." All were laid bare, but without the feeling that anything was being unnaturally spotlit.

It was in its reproduction of soundstage width and depth that the Bel Canto excelled. In fact, I heard more reverberation than I'd expected from recordings I thought I knew well. The string players on the Mozart Flute Quartet movement on Editor's Choice (CD, Stereophile STPH016-2) were set farther back in the stage than I was expecting, as were Billy Drummond's drums on "The Mooche," on the same CD. Particularly when I replaced the Parasound Halo JC1 monoblocks with the Boulder 860 amplifier, the players on Attention Screen's Live at Merkin Hall (CD, Stereophile STPH018-2) were set back slightly more within the subtle hall acoustic. And pianist Bob Reina's sotto voce mumblings during Mark Flynn's drum solo at the start of "Blizzard Limbs" were clearly audible. (Who was he talking to?)

Was this aspect of the DAC3's presentation enhanced accuracy or an exaggeration? I suspect the former. On my recording of Mozart's Piano Quartet in g from Bravo!, a selection of performances from the 1998 Santa Fe Chamber Music Festival (CD, Stereophile STPH014-2; the final movement also appears on Editor's Choice), the installation of a noisy air-conditioning system in St. Francis Auditorium meant that I'd had to abandon my purist philosophy and close-mike all the instruments. In the mix, I therefore had to add a judicious amount of Lexicon-sourced artificial reverberation. I had tried hard to match the character and level of that ambience to that of the actual hall, in which I had also run a pair of distant mikes. The Bel Canto, however, revealed the artifice, the slight disparity between the signature of the artificial reverb and that of the hall being more apparent than I had wished—or than I had experienced when mixing and monitoring this album with the Levinson DAC.

Against the benchmark Benchmark
The Benchmark DAC1 has set the standard for affordable D/A processor performance for three years now, and has recently been updated to add a USB input. I will be reporting on the new version in a Follow-Up, but for this review, I compared the Bel Canto e.One DAC3 with the original version of the Benchmark DAC1, which I had purchased after writing about it.

To permit instantaneous comparisons, I fed the Ayre C-5xe's AES/EBU output first to the Levinson No.30.5, then from that processor's two AES/EBU data outputs to the two DACs under test using identical lengths of Madrigal AES/EBU cable. Levels were matched to within 0.05dB at 1kHz by keeping the Bel Canto's output at its maximum and reducing the Benchmark's with its analog level control.

No doubt about it, the Benchmark DAC1 is still an excellent-sounding product, with well-extended, well-defined lows, a natural midrange, and clean highs. And, of course, it doubles its utility by having two pairs of headphone outputs. But the Bel Canto DAC3 scored with its slightly silkier high frequencies and its wider, deeper soundstage.

Promise fulfilled?
The real promise of a product such as the DAC3 is that it can be used to make silk purses out of the audio world's sow's ears: the host of el cheapo DVD players that may be able to pull the bits off of discs but have sonically compromised analog output stages and jittery digital outputs.

A few years ago I purchased a Pioneer DV-578A universal player ($150 at the time, now discontinued) to use as a benchmark in this arena. It's a serviceable player, but I'd been disappointed when I tried using it as a transport, even with the Benchmark and Levinson DACs, both of which have excellent measured jitter rejection.

I've mentioned in other reviews how much I've been enjoying David Gilmour's On an Island (CD, Columbia 2876-8028-2), released in 2006. "Red Sky at Night" has an addictive slow-drag feel; played on the Ayre C-5xe feeding the Bel Canto via an AES/EBU link, this track produced a wide, deep soundstage, with such details as Georgie Fame's Hammond-organ riffing and the room reverb on the snare drum well distinguished. Again to my puzzlement, given the DAC3's superb measured jitter rejection, when I played back the same track on the Pioneer hooked up to the Bel Canto with 10' of AudioQuest VSD-4 S/PDIF coax, the soundstage flattened a little and the bass didn't reach quite as deep. If I had to swear on it, however, I thought the Pioneer-AudioQuest combo was actually a slight bit better in ultimate definition.

Replacing the high-quality AudioQuest S/PDIF cable with the worst datalink I had to hand, a 15' length of generic plastic TosLink, gave a sound quality from the DAC3 that was hard to distinguish from the electrical connection. Again, if I had to swear on it, the balance using the Pioneer transport was perhaps slightly lighter overall with both the electrical and optical datalinks.

For my casual listening these days, I use a Slim Devices Transporter to access my iTunes library. It's definitely overkill to feed the Transporter's data output to the Bel Canto; the Transporter's DACs and analog circuitry are in the same league as the DAC3's. But, my goodness, feeding the TosLink output from the bargain-priced Squeezebox to the Bel Canto resulted in a sound that kept distracting me from the computer.

Computer Music
To assess the Bel Canto's sound quality from its USB input, I connected it to my five-year-old Apple TiBook, which recently survived a hard-drive replacement. Selecting the USB Audio Codec as the computer's default audio output in the System menu and playing back 44.1kHz-sampled files with iTunes, the sound was accompanied by what sounded like FM "birdies"; ie, silence when no music was playing, but a random whistling when it was. I couldn't eliminate this no matter how I tried—wondering if it was a grounding issue, I tried using the laptop in battery-powered mode, but no luck. So I switched to driving the DAC3's USB input from a more recent computer: the Mac mini that serves (ha!) as my household's music server.

Now the Bel Canto performed without audible problems. However, while the sound quality of the DAC3 used in this manner was okay, it wasn't in the same class as the processor fed data via its conventional digital inputs. The soundstage was flatter, less dimensional, the music less involving, the high frequencies less silky. Despite the more complex data-transmission path, I preferred the presentation of the same files played back via WiFi and the Squeezebox, again feeding the latter's optical output to the Bel Canto D/A.

Summing Up
I so wish that Bel Canto's e.One DAC3 had been priced closer to $1250 than to $2500. The former would make it a no-brainer credit-card purchase for almost any audiophile wanting digital playback quality that is the state of the art ca 2007. At $2495, its purchase should be a more considered decision. But its superb sound quality, excellent engineering, and the fact that its volume control makes a system preamplifier optional, all make the DAC3 a must-have product. Erick, you were so right!

Read more at http://www.stereophile.com/content/bel-canto-eone-dac3-da-processor-page-2#whJ7axs4uhcGe2WQ.99

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.