Escalante Design The Fremont Full Range Speakers (sell or trade)

Selling or TRADE these awesome speakers due to limited space. I moved to a small condo and just don't have the room. Rate them at 5/10 cosmetically. Functionally they are perfect! They come with matching Skylan stands. When they were shipped to me both speakers incurred small chips at the bottom front of the cabinets which took a huge loss as far as the value goes. Also the bottoms have some small scratches from the spikes which are fixed to the top of the stands. These are very heavy, local pick up only. I am in my late 60's and cannot physically move them or get them to a shipper. The stands alone are 88 lbs each. This pair came from a reviewer for Stereo Times. He had owned them for a number of years. If I could I would take them to an automotive paint specialist. Price is reasonable for these great speakers. Many reviews on the web. Trades accepted, tell me what you have. The speakers have twin 12 inch woofers that are part of the direct coupling design "Direct Coupling - vs. - The Typical Isobaric Design" The electronic network introduces a delay with two functions. 1) It introduces the appropriate delay between the two woofers so they operate in perfect signal alignment, and 2) it reduces the bandwidth being produced inside the cabinet by more than 3 octaves so that no midrange frequencies exit the port or reflect back through the external woofer. There is also an engineered progressive Acoustical and Mechanical impedance (inverse to each other) that helps to control the woofers and introduces precise delay so that the waves being produced by the internal woofer exit the cabinet (through the port) in phase with those being produced by the external woofer. This further extends the lows and makes the entire system more musically expressive. The result of Direct Coupling is a response time at least 20x faster than other designs in any loading. Increased speed of this magnitude equates to an overall increase in musicality (i.e. image placement, dynamics, transparency, harmonic fill, timbre, soundstage, and air). Additionally, Direct Coupling extends the upper bandwidth by 2 full octaves and the lower bandwidth by 1.5 octaves (in comparison to sealed or ported alignments. A typical isobaric loading limits the upper bandwidth to 200Hz and only extends the lower by a half (0.5) octave. Direct Coupling also increases power handling by 10 to 30 times of other loudspeakers while Isobaric will reduce power handling by 50% with all driver sizes Specifications: Design Type: Direct Coupled Woofer: 2 x 12" (Isobaric construction camera) Tweeter: Ring radiator, Revelator ScanSpeak Freq. Response: 18 Hz - 50 KHz Amp: 1 - 1000 watts Sensitivity: 93 dB Impedance: 8 Ohms nominal Height: 28.5 inches (73cm) Width: 14 inches (36cm) Depth: 18 inches (46cm) Weight: 110 lbs. each 50 (kg) Shipping Weight: 157 lbs. each (72kg) Stand Dimensions: Height: 16 inches (41cm) Width: 14 inches (36cm) Depth: 18 inches (46cm) Weight: 88 lbs. each (40kg) Shipping Weight: 142 lbs. each (65kg)