Paradigm AMS300 *IN WALL*

Step up to superior high-frequency response, exceptional midrange clarity and definition and even better bass performance. Not to mention the most rigid high-strength chassis and mounting brackets on the market.

Full-Perimeter Bracket Design. Unlike typical mounting ears, brackets cover the full diameter or height and width of the speaker chassis to effectively sandwich and strengthen the area around the mounting hole.

Advanced High-Power S-PAL™ Satin-Anodized Pure-Aluminum Domes. Ferro-fluid damped and cooled. The low-mass tweeter domes with treated textile suspensions are exceptionally rigid. Extremely uniform and instantaneous power response.

Advanced High-Power Mineral-Filled Co-Polymer Polypropylene Cones. Large, computer-optimized magnets and high-power motor structures promote natural and detailed sonic reproduction with outstanding extended bass response.

High-Pressure Die-Cast Aluminum Chassis and Mounting Brackets (selected models). The supremely rigid die-cast structure reduces resonances and standing waves, while the aluminum does double-duty as a heatsink.

High-Strength GRIP™ Glass-Reinforced Injection-Molded Polymer Chassis and Mounting Brackets (selected models). Design strength/rigidity reduces the problems of vibrations and resonances.

AMS-300 Specifications

Design

2-driver, 2-way in-wall / in-ceiling, die-cast chassis / mounting bracket

Crossover

2nd-order electro-acoustic at 2.0 kHz

Frequency Response On-Axis

±2 dB from 60 Hz - 22 kHz

Frequency Response 30° Off-Axis

±2 dB from 60 Hz - 20 kHz

High Frequency Driver

25-mm (1 in) S-PAL™ dome, die-cast heatsink

Mid/Bass Frequency Driver

210-mm (8 in) mineral-filled polypropylene cone

Low Frequency Extension

40 Hz (DIN)

Sensitivity Room / Anechoic

91 dB / 87 dB

Impedance

Compatible with 8 ohms

Suitable Amplifier Power Range

15 - 150 watts

Maximum Input Power

100 watts

Finishes

White, paintable

Weight

7.5 lbs. (3.4 kg)

Overall Dimensions

12.5625" (31.9cm) Height
9.125" (23.2cm) Width

Cut-Out Dimensions

11.5" (29.4cm) Height
8.0625" (20.5cm) Width

Minimum Mounting Depth
Depth required is the distance
between 1/2" drywall, or similar material.

2.625" (6.7cm)

Minimum Internal Volume Required

0.70 cu ft (20 L)