Halcro MC50 5 Channel Home Theater Amp

I own a mid to high end Audio and Home theater store. I became a Halcro dealer with plans to build a dedicated room in my home to try to achieve the ultimate system for both Home Theater and 2 channel music listening. I bought the equipment but for various reasons never built the room. Since then the Halcro equipment has been used in my noisy ( furnace ), low ceiling, basement Home Theater room. Over time I’ve developed a nice small room 2 channel system ( ARC VSi60 with Diapason Adamantes and a Vandersteen Subwoofer) in my office at home. I found that I was doing most of my music listening in my home office so I realized that the Halcro was overkill in my basement so I replaced it with a Denon AVR 4311 Surround receiver.
I am listing my Halcro SSP-100 that was sent back to Halcro to be updated to a SSP-200 version. I used the Halcro MC 50 five channel amp with the processor. My basement was not ideal for 7 channel use so I never opened the Halcro MC 20 channel amp that was bought for use in my dedicated room as the front L/R for surround or 2 channel L/R amp. These three products are being listed simultaneously but separately so that you can choose any one or any combination of the three.
This is the 5 channel amp I have been using with the SSP100/200. It is 350 watts x 5 into 4 ohms. I have the box, original packing material, manual and all accessories. This amp is currently listing for $5990.00 I am starting this unit at $2700.00.
High End Power Amplifier. Amp. 5 Channel.

Specifications and Features
P O W E R O U T P U T
•350W RMS continuous into 4 Ohms per channel
•Frequency Response (-3db) 5Hz – 45kHz

F E A T U R E S
•MCA50 is a 5 channel rack mountable or free standing power amplifier
•Full control via RS232 or ETHERNET connection
•Remote trigger switch between On & Standby

A U D I O
Inputs, selectable
•Unbalanced: RCA sockets
•Balanced: XLR sockets Outputs
•Internally bridged: Binding Posts

C O M M A N D
F U N C T I O N S
•Switch between On & Standby
•Ability to inhibit individual amplifier modules
•Amplifier module will indicate Over Temperature condition
•Amplifier module will indicate Over Current condition
•Halcro Reliability Assurance Service

G A I N
•Unbalanced and balanced: 29x = 29dB

P O W E R S U P P L Y
•Universal switch mode
•Power factor corrected
•Fully protected
•Compliant in all countries

F A U L T
I N D I C A T I O N S
•LED turns red if Heatsink temperature exceeds 78ºC
•LED flashes red if current limit Exceeded

D I S T O R T I O N
•THD: 94% efficient)

P R O T E C T I O N
•Thermal, > 78°C on heatsinks
•PSU voltage, High & Low
•Over current
•Pulse width guaranteed at logic level
•EMI Filtering, series & common mode
•Carrier switching frequency, 470kHz
•Carrier frequency level at output into 4 ohms,