XLR to RCA Interconnects 1 Meter, SILVER / TEFLON
3 pole male XLR to RCA Cables (Female available)
First of all, there is no other cable on the market at this price point that even comes close to these. No hype, No snake oil No voodoo. Pure, simple, outstanding cables with performance approaching the very best and most expensive audio cables on the market, for a fraction of the price. Well below what audiophiles normally expect to pay for superbly engineered and hand crafted components. Best Value of any cables available.
All my cables are made by hand by me one at a time, I'm a small operation working at my home, with a small markup (40%) including labor. Unlike large cable manufactures which have a large overhead and typically charge 16 - 20 times cost. My mission is to the finest audio components, of the finest materials, at a reasonable price.
The wire is MIL spec aerospace stranded silver plated copper wire, silver being the best conductor of electricity, Teflon insulation is very close to air resulting in very low capacitance which makes the cable suitable for any audio component as it will not contribute to instability,or absorb the signal. Teflon insulation is very thin resulting in a cable that is lightweight and flexible. This cable will not stress the jacks on your components, but is very large gauge. This configuration provides incredible imaging and detail across the entire audio spectrum, deep, tight, powerful bass, sweet transparent midrange smooth and linear high frequency response. This cable provides incredibly low resistance.
Silver plated Coaxial Cable
Constructed with stranded silver plated copper conductors
insulated with an extruded PTFE (polytetrafluoroethylene) dielectric.
The outstanding electrical and mechanical properties of silver and PTFE over a broad
range of frequencies makes this coaxial cable outstanding for audio applications.
RCA Connector Specifications:
Silver Ghost Locking RCA:
Locking RCA plugs establish constant, firm contact with RCA jacks via a variable pressure build-up system. By twisting the shell to the left (screwing on),
pressure is created on the eight-notched contact grounding ring. This contracts and transfers the built-up pressure to the RCA jacks.
Locking RCA plugs are thereby firmly fixed and can no longer be pulled out. Unlike standard RCA connectors, a locking RCA connector will not fatigue or loosen due to age or repeated use. OFC Center Pin. The Silver Ghost RCA connector utilizes 101% IACS C11000 High Conductivity Oxygen Free Copper for the center pin which is the highest conductivity copper available for the design. The center pin of the average RCA connector is typically some form of brass which is not nearly as conductive as the copper, silver plated copper or silver conductor cable you'd be connecting to it.
Materials like C36000 Brass at 26% IACS or C54400 Phosphor Bronze at 19% IACS are the typical copper alloys used in RCA connector center pins due to their low cost and easy machining. Find out more about Copper Alloys at www.Copper.org
5um Direct Silver Plating: The only plating option we currently offer is a 5um thick direct Silver plating without an under layer ensuring the maximum conductivity possible. Silver is the highest conductivity metal at 104% IACS and also has the lowest contact resistance of any metal. With proper handling silver plating will outperform any other connector plating. Reduced Mass Ground Bar:
Most single piece body designs of RCA connectors use a grounding bar that is used to attach the shield and or negative contact of the cable by means of soldering.
This design is still used but the grounding bar has been reduced in mass to facilitate quicker soldering so cables don't get overheated during assembly.
Silver Ghost Locking RCA Connectors:
• Locking Analog Audio RCA Connector
• 5um Direct Silver Plated Contacts
• Solid C11000 Copper (OFC) Center Pin
• Teflon Insulated Center Pin
5% Silver solder
XLR Connector Specifications:
NEUNC3FXXB AND NEUNC3MXXB- Neutrik XX Series 3-Pin XLR Female and Male cable connectors.
BLACK METAL HOUSING, SILVER CONTACTS
Neutrik's "next generation" XLR connector, improves on Neutrik's industry standard "X" series connectors.
Similar in style to the NP*X series, this new series is simple to use and will be available in 3 pin configuration.
The compact unique styled die cast shell has internal threads that mate with the external threads on the boot to eliminate damage sometimes found on exposed threads.
This series also incorporates Neutrik's unique chuck-type strain relief.Unique female and male cage type contact for increased conductivity and reduced wear of the male contacts
A new ground contact that provides better integrity between the chassis and cable connectors. NC**XX series black metal housing with silver contacts.
The new unified shell is stronger, and mates with all current Neutrik X series connectors.
1 pair 1 meter
Other lengths available.
Shipping is a flat $6.95 USPS
Email me with any questions,
All the best,