KrautWire® Fractal

KrautWire® audio cables are the result of years of intense development, ongoing since 1993. Company name is based on Mr. Frantisek Kraut - who started this business 19 years ago with my small help. During the course were used all knowledge's and possibilities of conductors production in the world in general. When designing cables were respected as the results of electrical measurements and long-term listening tests on a very wide range of audio equipment conducted by a team of skilled associates specialized magazines and audio studios. Our main objective was to achieve the best features of wires in absolute terms - that is unrivaled in uncompromising sound as well as mechanical construction. Our philosophy is a proven fact that, figuratively speaking, the best cable is no cable. We reject the theory tuned to adjust the cables to measure the components of questionable quality. The cable should not inherently retouch device flaws, but only to pass on information unchanged. This contributes to the materials and geometry KrautWire cables. Used are silver signal conductors of the highest attainable purity. On some models for even greater increase in stability and unlimited lifetime we use 24 carat gold. And in both solid and deposited on silver wires. For other models we utilize hybrid irreplaceable properties of Cu / Ag conductors. As insulation we use only top dielectric properties of Teflon™ (DuPont registered trademark). Teflon is applied to the wires by the Rosendahl machine. In the case of gold and gilded wires are used the best dielectric properties of air in combination with a cold Teflon apply. The high quality of products completes using of quality Neutrik and WBT connectors. Each assembled set is sonically tested and verified by measurement. Fractal This is the top speaker cable from the company production program, at which were whole employed more than eighteen years experience of corporate history. Of course there is the using of DuPont™ Teflon® as a dielectric. FGCR geometry (Fractal Geometry of Cross Rotation) is derived from the company's flagship ORG. But it is refined and optimized for specific sections of the wires. (It was made even more favorable measured values of inductance - which is a very important parameter for speaker cables). Cable metallurgy is a hybrid - it is a combination of 5N silver with 7N copper - protecting purity copper is perfect, while maintaining the principle of contact silver with Teflon. Individual wires are solid-core. The whole fractal geometry of the cable is made by hand. (Indeed, this arrangement cannot be mechanically implemented.) The net wire gauge is 2 x 6.3 mm2. Technical specification • fractal geometry of the cross-rotation (i.e. a recurring motif of unit in one element) provides a completely uniform homogeneous array of signal transmission, which among other things, inert to external interferences • cross-section 2 x 6.3 mm2 • skin effect resolved by a large number of mutually insulated conductors (64) • hybrid silver-copper conductors, solid core • dielectric from Teflon® DuPont™ • handwork • inductance of 0.07 μH/m • resistance 5.2 mOhm/m • capacity of 890 pF/m • connectors on request (default WBT Nextgen Ag) • length on request (default 2.5m, 8.2 ft) Reference: http://www.audiodrom.cz/recenze/kabely/266.html If you have questions, don't hesitate contact me: mirek (at) krautwire.cz