KrellS-300i Integrated AmplifierKrell S-300i Integrated AmplifierKrell S-300i – Integrated Amplifier With 150 Watts into 8 ohms & 300 Watts into 4 ohms, Krell’s latest affordable integrated amplifier is capable of driving most speakers out there. Legendary...1850.00

Krell S-300i Integrated Amplifier [Expired]


no longer for sale

Krell S-300i – Integrated Amplifier With 150 Watts into 8 ohms & 300 Watts into 4 ohms, Krell’s latest affordable integrated amplifier is capable of driving most speakers out there. Legendary Krell sound in one 43 lb package. Absolutely ‘like new’ condition. No scratches or wear. If you pulled this out of the box and didn’t know that it was pre-owned, you would believe it’s new. This amp was sparingly used in my second system. Amp includes: original double shipping boxes, aluminum remote (Has to be the nicest remote I’ve ever seen), power cord, iPod cord, owner’s manual all additional factory paperwork. I purchased this unit new and have been very impressed with it. It is the best sounding integrated I’ve ever heard at this price point. I’m selling due to I’ve finally moved up to mono blocks. Since I haven’t sold on Audiogon before, I wanted prospective buyers to see my past dealings. Please review my feedback on EBay. My username is: da-drummer With the exception of shipping damages, I guarantee my products to be as described and functional or I’ll refund your money. I will only accept Paypal for payment. Shipping & insurance costs are the sole responsibility of the buyer. Specifications from Krell’s website. Inputs 1 pr. balanced via XLR connectors 3 pr. single-ended via RCA connectors 1 dedicated iPod input via 30-pin connector Outputs 1 pr. preamp outputs via RCA connectors 1 pr. speaker outputs via gold-plated binding posts Control inputs 1 RS-232 input via 9-pin D-subminiature connector 1 remote IR detector input via 3-conductor 3.5 mm connector 1 12 VDC trigger input via 2-conductor 3.5 mm connector Control output 1 programmable 12 VDC trigger output (30 mA maximum current) via 2-conductor 3.5 mm connector Input impedance Balanced: 95 kΩ Single-ended: 47.5 kΩ Frequency response 20 Hz to 20 kHz +0, -0.14 dB <2 Hz to 110 kHz +0, -3 dB Signal-to-noise ratio >84 dB, wideband, unweighted, at maximum gain, referred to full power output >93 dB, "A"-weighted Gain 32.5 dB Input sensitivity Single-ended or balanced: 800 mV RMS Total harmonic distortion <0.035% at 1 kHz, at 150 W, 8 Ω load <0.26% at 20 kHz, at 150 W, 8 Ω load Output power 150 W RMS per channel at 8 Ω 300 W RMS per channel at 4 Ω Output voltage 99 V peak to peak 35 V RMS Output current 15 A peak Slew rate 50 V/S Output impedance <0.080 Ω at 20 Hz <0.11 Ω, 20 Hz to 20 kHz Damping factor >100 at 20 Hz, referred to 8 Ω >75, 20 Hz to 20 kHz, referred to 8 Ω Power consumption Standby: 40 W Idle: 60 W Maximum: 1000 W Heat output Standby: 140 BTU/hr Idle: 210 BTU/hr Maximum: 1600 BTU/hr Specifications for preamp only: Gain 6.3 dB (single-ended) Volume control Current-mode, 12-bit, discrete R-2R ladder Input overload Balanced: 12 V RMS Single-ended: 6 V RMS Output overload 8 V RMS (single-ended) Frequency response 20 Hz to 20 kHz +0, -0.05 dB <2 Hz to 1.0 MHz +0, -3 dB Total harmonic distortion <0.009%, 20 Hz to 20 kHz, at 2 V RMS Signal-to-noise ratio >85 dB, wideband, unweighted, at maximum gain, referred to 2 V RMS >94 dB, "A"-weighted Dimensions 17.26 in W x 4.09 in H x 17.70 in D 438 mm W x 104 mm H x 450 mm D Weight Unit only: 42 lb [19.0 kg] As shipped: 51 lb [23.1 kg]
Seller Information

mph63 

Last 12 months
All-time00.0%

Member since May 2009

Items from this seller