This is an offering for a Linn SizMik 10.25 subwoofer.
Fine operationally, some minor surface marks - but all around good.
Drive Unit: 10" paper coned, long throw, high motor force bass driver.
Type: Pitch precise bass reinforcement loudspeaker with integral active amplification and equalization circuitry for stand-alone use.
Function: Active bass sub. 500W amplifier. Adjustable roll off for seamless system integration. 25 litres. 9Hz @ 220Hz frequency response.
Construction: 38mm and 19mm MDF cabinet, horizontally braced. Balanced veneers. Power amplifier module contained in separate cavity.
Control Interface: Signal sensing auto switch on/off for energy conservation and local remote control.
Protection: Fully protected against overload, over temperature, full short and overdrive protection.
Mains Supply: 110VAC > 120VAC @ 50/60Hz or
220VAC > 240VAC @ 50/60Hz
Output Power: 500W RMS, 1,000W Peak
Stand-by Power Consumption: 6 Watts
Line level audio in and loop out RCA phono
Line level high pass output RCA phono
High level 4.0mm input connector
Size: 360mm x 391mm x 360mm (WxHxD, including feet)
-4 step internal low pass frequency @ 50,
80, 120Hz and flat
-9 step internal high pass frequency from
9 @ 220Hz
-9 step external high pass frequency from
9 @ 220Hz
-Gain adjustable 35dB in 1dB steps
-3 step bass equalization
-Absolute phase can be normal or inverted
-4 step time out after signal loss @ 5,
10, 20 seconds or on continuously
Priced for local pick up only, CASH & CARRY.