JOLIDA FUSION 3502P TUBE AMP - WITH ALL UPGRADED TUBES!

OFFERED FOR SALE - SIX MONTH OLD JOLIDA FUSION 3502P TUBE AMPLIFIER. THIS AMP IS IN EXCELLENT OPERATIONAL AND COSMETIC CONDITION. THIS AMP HAS HAD ALL OF THE TUBES UPGRADED AS FOLLOWS:

4 New Matched And Balanced Shuguang Treasure (Select Grade) KT88-Z Power Tubes;

2 Matched And Balanced Genelex Gold Lion 12AX7 ECC83/B759

2 Matched and Balanced NOS Mullard 12AT7WA/CV4024

I paid $1,450.00 for the original new amp at the end of December, 2016.

The 4 Shuguang Treasure tubes cost $303.00

The 2 Genelex Gold Lion tubes cost      70.00

The 2 Mullard tubes cost                        136.00

So, my total investment in this amp is $1,959.00!!!!

All of the tubes are "burnt in" and all have relatively low hours.                                                    

You will receive all of the above tubes with purchase of this amp. I will also include the 4 Tung-Sol 6550 tubes (which came with the Amp from Jolida). These 4 tubes are worth about $39.00 each.

It is a great sounding amp and I am very sorry to part with it. However, a financial hardship leaves me with no other choice.

Technical Specifications

Maximum Power Output: 85 W per channel at 8 ohms, 1KHz with 6550 Tubes. 75 W per channel at 8 ohms, 1KHz with EL34 Tubes

Rated Output Power: 60 W per channel at 8 ohms, 25Hz to 60KHz with 6550 Tubes. 50 W per channel at 8 ohms, 28Hz to 72KHz with EL 34 Tubes

Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB

Bandwidth: 15Hz to 80KHz + 3dB; 0dB 60 W 1KHz

Distortion THD: Less than 1% at 20 V output, 28Hz to 15KHz

Circuit Type: Ultra Linear, Class AB

Input Impedance: 100Kohms

Input Sensitivity: 2 V at 1KHz for 60 or 50 watt output

Output Impedance: 4 ohms and 8 ohms

Negative Feedback: Less than 5 dB

Noise and Hum: 90dB below rated output

Tube Complement: 4 pieces of 6550/KT88 or 4 pieces of EL34 power outputTubes; 2 pcs. 12AX7A/ECC83 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers.

Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 450 watts maximum (220 VAC 50Hz option)

Dimensions: 17 inches (43cm) wide by 15 inches (38cm) deep by 7.5 inches (19 cm) high

Weight: 50 pounds (18 Kg) net, approximately 55 pounds (21 Kg) packaged

Warranty: Two year limited parts and labor. One year or 3000 hours whichever comes first on Tubes.

Bias Settings: 500 millivolts + 50 mV for 6550s, or 400 millivolts + 40 mV for EL34s

Fuse: 110 - 120 VAC, 6.3 Amp slo blo; 200 - 240 VAC, 3 Amp slo blow.

Construction Details and Features:

o Stereo Power Amplifier: Input 2 V driving 60 watts (6550 tubes) or 50 watts (EL34 tubes) output, maximum 90 watts (6550 tubes) or 80 watts (El34 tubes) output.

o Multiple Inputs: RCA and XLR inputs.

o Custom Wound Audio Transformers with a core of German grain oriented silicon steel. 15th generation proprietary design. Secondary can be configured for a 4 ohm or 8 ohm load.

o Top panel bias testing terminal with bias adjustment controls plus EZ-biasing.

o State of the Art Components: Hexfred Diodes, carbon composite grid resistors, custom coupling cap., Alps blue potentiometer.

o Low Feedback Design: Only 3 dB

FREE SHIPPING IF ASKING PRICE IS MET - OTHERWISE BUYER PAYS SHIPPING