Schmitt Custom Audio 4mm 6N OCC Copper Speaker Cables 10ft 1pr

This sale is for a set of two 10ft 4mm 6N OCC Copper speaker cables with Furez pure bare copper spades pictured. Built today, 02/05/2018.

Other options here:

https://www.schmittcustomaudiocables.com/product-page/4mm-6n-occ-copper-speaker-cables

Schmitt Custom Audio 4mm 6N OCC Copper Speaker Cables with Furez Spades.These are built with 4mm square - 49 strands 0.32mm wire sealed in clear PVC equaling near a 12 gauge wire per Furez SP8 W25NP Bare Copper Spade Speaker Connector or Furez SP8-SB40AG Silver Spade Speaker Cable Connectors sealed in clear heat shrink.

Furez Spades are Designed for Common 5/16" (8mm) Binding Posts.

Furez Bare Copper and Silver Plated Bananas to come in near future…

Both strands of 6N OCC copper wire are twisted, dressed in your choice of Snake, Beige, or Brown Techflex expandable sleeves and sealed in heat shrink.

I have many other colors upon request but please keep in mind that the copper cable will show through the expandable sleeves.

Please read all specs too make certain the spades will fit your speaker posts.

FUREZ

These are the Best Speaker Cable Spade Connectors on the market today!

These Spades are Machined from C11000 Pure Copper, then Direct Silver Plated which gives them a conductivity rating of 105% for maximum signal transfer. These Solid Copper Pure Silver plated Spade Connectors are also available in Non-Plated, version. If you are looking for the best possible connectors for your speaker cables, these are it! These are the best connectors money can buy. These Silver Plated Spade Connectors are a Great Choice for your Stereo Audio and Home Theater Systems.

Furez SP8-SB40AG Silver Spade Speaker Cable Connector Features/Specifications:

• Ag - Direct 5um Pure Silver Plated Spade Speaker Cable Connector

• Designed for Common 5/16" (8mm) Binding Posts

• Machined from C11000 101% IACS Copper

• Single Piece Electrical Path Construction Maximizes Signal Conductance

• 25 Deg Offset Angle

• Deep Barrel and Forward Set Screws Protect Against Shorting - Conductor Insulation can be Inside the Banana Connector

• Dual Torx T6 Set Screws for securing speaker cable

• 0.158 (4.01mm) Speaker Cable Entry ID

The Furez SP8-SB40AG - Silver Plated Spade Speaker Connectors are machined from a single solid piece of the highest conductivity copper possible (C11000 101% IACS) ensuring maximum signal transfer is achieved. Dual T6 Torx set screws provide very secure attachment of speaker cable and each spade connector comes with 2 set screws. Additionally, the SP8-SB40 spade speaker connector is designed with a deep barrel and forward positioned set screws so the insulation of the cable can remain inside the barrel of the connector thus alleviating the issue of exposed bare wire strands. The SP8-SB40 series spade speaker cable connectors are offered without plating, or with direct silver plating (app. 106% IACS) to suit a variety of installation requirements. Nickel (app. 24%IACS), Rhodium (app. 39% IACS) and Platinum (16% IACS) are not used in our plating schemes because these low conductivity metals only take away from the performance of the connector while adding cost. IACS (International Annealed Copper Standard) is the standard by which conductivity of copper alloys and metals are compared.

Furez SP8-W25NP Bare Copper Spade Speaker Cable Connector Features/Specifications:

• NP - Not Plated - Bare Copper - Spade Speaker Cable Connector

• Designed for Common 5/16" (8mm) Binding Posts

• Machined from C11000 101% IACS Copper

• 25 Deg Offset Angle 0.102" (2.59mm) Speaker Cable Entry ID

• Internal Depth: 0.600” (15.25.7mm)

• Recommend Cable Strip Length 39/64" (15.25mm)

• Overall Length: 1.555" (39.51mm)

• Weight: 1.0 Ounces Per Pair without set screws

Prices start at $110 per 6ft cable  with Furez Bare Copper Spades.

Schmitt Custom Audio Cables for the "Serious Listener"

https://www.schmittcustomaudiocables.com/shop

Free shipping to the lower 48 intercontinental United States!