AnthemP-2Anthem P-2Anthem P-2 Reference Power amplifier great for stereo and for front speakers in surround sound. I also have a P-5 if you need that as well and we can discuss that if you like.This amp works perfect...1875.00

Anthem P-2 [Expired]


no longer for sale

Anthem P-2 Reference Power amplifier great for stereo and for front speakers in surround sound. I also have a P-5 if you need that as well and we can discuss that if you like.
This amp works perfectly and sounds good. It was in my business partners home theater.
General Inputs 2 Single-Ended, 2 Balanced, 1 Relay Trigger (3.5 mm Mono Jack) Outputs 2 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack) THD+N (225 W into 8 Ω) 0.0007% at 1 kHz, 0.008% at 20 kHz IMD 0.00019% (CCIF, 325 W into 8 Ω) POWER BANDWIDTH 10 Hz to 150 kHz
(+0 -3 dB, 325 W into 8 Ω) FREQUENCY RESPONSE 20 Hz to 20 kHz (+0 -0.15 dB),
5 Hz to 100 kHz (+0 -2 dB) INPUT SENSITIVITY (RCA and XLR 0 dB inputs) 1 Vrms in for 28.3 Vrms out
(100 W into 8 Ω) INPUT IMPEDANCE 18 kΩ (RCA), 22 kΩ (XLR) DAMPING FACTOR >600 at 20 Hz, 400 at 1 kHz (ref. 8 Ω) S/N RATIO 125 dB, A-weighted (ref. 325 W) CROSSTALK (between any two channels) -140 dB (20 Hz), -80 dB (20 kHz) VOLTAGE GAIN 29 dB SLEW RATE 40 V/µs SWITCHES Front Panel Power (On/Off) Rear Panel On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB) POWER OUTPUT
(Per channel, continuous RMS, 20 Hz to 20 kHz, <0.1% THD, one or all channels driven.) Impedance 8Ω 4Ω 2Ω # of Channels Driven 1 All 1 All 1 All
325 W 325 W 500 W 500 W 675 W 675 W Statement P2 and P5 amplifiers are stable into any impedance down to a short circuit at full output. POWER REQUIREMENTS SUPPLY VOLTAGE 105 to 130 V, 60 Hz POWER CONSUMPTION 1800 W DIMENSIONS Height 9-3/8 inches (23.8 cm) including feet Width Faceplate 19-1/4 inches (49 cm)
Chassis 17-1/4 inches (43.8 cm) Depth 22-1/2 inches (57.2 cm) including handles Weight (unpacked) 75 lb (34 kg)
Items from this seller

more from this seller →