McIntosh MA-6500

A McIntosh classic - one of the best integrated amps they ever made!

One fantastic feature of this amp is that you can power 2 sets of speakers simultaneously with the push of a button.

Full working condition. No scratches or blemishes. Ships in original McIntosh box.

Comes with working remote, manual, and power cord.

No returns. Ship to continental US only. Buyer pays actual cost of shipping-no fee for packing.

FEATURES:

• 2 x 120/200/250 watts (8/4/2 ohms)

• Wide power bandwidth with ultra-low distortion

• Exclusive McIntosh Power Assurance System:

• Power Guard clipping protection

• Sentry Monitor ® current protection

• Thermal Cutout

• Turn-On Delay

• Soft Start inrush protection

• Illuminated peak-responding meters

• Silent electromagnetic switching

• Precision-trimmed volume control with digital readout

• Loudness compensation

• Exclusive McIntosh tone controls

• 6 source selections including phono

• Switching for 2 pairs of speakers

• Accommodates more sources with McIntosh MVS3 A/V Selector

• Control data output for source components

• Remote power control

• Remote operation of lights, screens, and drapes with McIntosh

• HC1 Home Controller

• Power and mute indications shown on multizone keypads

• and sensors

• Electronically regulated power supply with double-shielded transformer

• Gold-plated input and output jacks

• Fanless convection cooling

• Modular construction with steel chassis

• Glass front panel with illuminated nomenclature

• Infrared remote control

• Connector for external IR sensor or keypad controller

• Headphone jack

SPECIFICATIONS:

• RMS
Power Output (8/4/2 ohms): 120/200/250W min. sine wave continuous
average power output per channel from  20Hz to 20kHz with both channels
operating

• Output Load Impedance: 2, 4, or 8 ohms

• Rated Power Band: 20Hz to 20kHz

• Total
Harmonic Distortion: 0.005% max. at any level from 250 milliwatts to
rated power per channel from 20Hz to 20kHz with all channels operating

• Intermodulation Distortion: 0.005% max. if instantaneous peak power output does not exceed 400W per channel

• S/N Ratio (A-Weighted)

•     Power amp: 110dB below rated output

•     High level: 100dB below rated output (90dB IHF)

•     Phono: 90dB below 10mV input (84dB IHF)

• Damping Factor: 230 (8 ohms), 120 (4 ohms), 60 (2 ohms)

• Input Impedance: High level: 22k ohms, Phono: 47k ohms, 65pf, Main in: 20k ohms

• Voltage Gain: High level to tape: 0dB, High level to main: 20dB

• Dynamic Headroom: 2.4dB

• Frequency Response: 20Hz to 20kHz, +0 / -0.5dB

• Maximum Voltage Output: 8V from 20Hz to 20kHz

• Input Sensitivity:

•     High level: 250mV for 2.5V rated output (50mV IHF)

•     Phono: 2.5mV for 2.5V rated output (0.5mV IHF)

•     Main in: 2.5V for rated output

• Maximum Input Signal: High level: 10V, Phono: 90mV

• Power Guard ®: Clipping is prevented and THD does not exceed 2% with up to 14dB overdrive at 1kHz

• Tone Controls: Bass and treble: ±12dB

• Power Requirements: 120V 50/60Hz, 4A

• Dimensions (h x w x d)

•    inch: 5.375 x 17.5 x 18.125

•    cm: 13.7 x 44.5 x 46

•    includes clearance for connectors

•    knob clearance: 1.125" (2.9 cm)

• Weight: 41 lbs. (18.6kg) net, 60 lbs. (27.3kg) shipping