Dunlavy Audio Labs SC-IV Signature. Vintage Glory, Highly Reviewed

You’re looking at a pair of rare and fantastic Dunlavy SC-IV speakers from acclaimed designer John Dunlavy.

Signature Collection, Made in USA! 

Condition is overall very good, the drivers are in perfect condition with no signs of wear or abuse. The tweeters are perfect with no creases or dimples, the woofer surrounds are also perfect with absolutely no cracking or tearing, and the midranges are immaculate. The felt surrounds are clean and well secured. 

The cabinets looks great with no deep scratches or blemishes other than the occasional light scuff mark. The bases are fair but have some slight discoloration near the back. The grills could use new fabric if your intent is to use them. The grill frames are steady and solid so it should be easy to recover them. I prefer to use these speakers without the grills because they look so impressive with all the drivers showing.

At 91db efficiency you’ll have great flexibility in choosing an amplifier. I’ve driven these at respectable volume levels with as little as 30w. 

On the back you’ll find dual binding posts in case you’d like to bi-wire or bi-amplify them. They are mounted on a high quality anodized metal plate. 

If you are looking to put together a home theater system with these I have available 3 x SC1 LCR speakers in the same finish that would complete the set. Please inquire. 

Technical Specifications:

Description: Three-way dynamic loudspeaker. Drive-units: 1" composite textile-dome tweeter, two 5.5" paper-cone midranges, two 10" long-throw paper-cone woofers. Crossover: first-order design (frequencies not specified). Biwire and biamp capability. Frequency response: 25Hz-20kHz, ±1.5dB; -3dB at 20Hz (anechoic). Sensitivity: 92dB/W/m. Impedance: 5 ohms nominal; 3.0 ohms minimum, 7.5 ohms maximum. Recommended amplifier power: 50W minimum into 8 ohms. Recommended listening distance: 8-25'. Dimensions: 72" H by 12" W by 18" D. Weight: 190 lbs. Price: $7995/pair in light or black oak, $8495 for cherry and rosewood. Approximate number of dealers: 30. Manufacturer: Dunlavy Audio Labs, Inc., P.O. Box 49399, Colorado Springs, CO 80949-9399. Tel: (719) 592-1159. Fax: (719) 592-0859. Web: 

A Few Excepts from Stereophile:
Description & design It definitely takes two people to unpack and set up a pair of SC-IVs. The 6'-tall, 180-lb speakers, which are obviously well out of the minimonitor class, are likely to visually dominate all but very large rooms. However, the SC-IV's proportions are unusually pleasing, and the speaker is mounted on a stand/plinth in a manner that gives the impression that it's "floating" in the air, so the overall effect is not as massive as might be expected. The review pair was finished in flawless "architectural-grade" oak veneer. Removing the grille revealed a symmetrical arrangement of drivers that those familiar with Dunlavy's earlier Duntech designs will recognize: a centrally located fabric-dome tweeter, flanked by 5½" cone midrange units, with 10" woofers at the top and bottom. The tweeter and midrange are sourced from Vifa, with modifications (including damping of the tweeter's back wave) made at the factory, according to DAL's specifications. The tweeter is relatively inexpensive, but Dunlavy claims that, when modified, its performance exceeds that of the most exotic and expensive units on the market. The Morel woofers feature long-throw voice-coils. The tweeter and midrange drivers are in a sealed compartment that does not extend the full depth of the cabinet, leaving the rest of the cabinet (including the space behind the tweeter/midrange compartment) to serve as a common enclosure for the woofers. The 1"-thick MDF cabinet is heavily braced and filled with foam (Dunlavy believes that overdamping the woofer produces the most realistic bass response). As with Duntech speakers, there is extensive felt treatment around the tweeter and midrange drivers (footnote 4). Generically, the rather complex crossover falls into the minimum-phase, first-order (6dB/octave) category, but Dunlavy says it cannot be accurately described in terms of conventional slopes and crossover points. There's also a network to notch out the tweeter's resonant frequency and conjugate load matching to produce an easy impedance load. The SC-IV is set up for single or bi-wiring. The binding posts are extra-thick, which makes them incompatible with most spade lugs, and they're difficult to tighten properly. DAL's Quality Assurance process involves the testing of every component, subassembly, and assembled speaker. 

Sound This is a fabulous speaker! On my first day with the review pair, with the drivers not broken-in and the setup not even close to being ideal, I was hearing things on familiar records that I'd never heard before. They continued to improve with playing, reaching higher and higher levels of performance as I tweaked the setup and worked at optimizing the selection of associated components. The most startling of the SC-IV's many strengths was the impression it gave of providing an unimpeded pathway to the musical source and to the sonic characteristics of other components in the reproduction chain. Call it transparency, revealingness, resolution, or clarity: The SC-IV had it in spades. With a good recording, the sound of instruments in an orchestra and individual voices in a chorus were presented with a timbral and spatial definition that was simply stunning. 

Resolution, soundstaging, timbral accuracy, tonal balance, bass extension. What else is there to consider? Dynamics and "pace," that's what. Can the speaker, as Martin Colloms might say, boogie? 

Concluding thoughts I started this review with a Dunlavy Audio Labs quote claiming that measurements can reliably predict a speaker's ability to reproduce music. The SC-IV is a result of this design approach: It measures exceedingly well, and sounds superb. Has John Dunlavy proven his hypothesis? Maybe yes, maybe no. The "academic" answer is that the evidence presented is consistent with the hypothesis, but does not by itself prove it. In order for measurements to be useful, we must know what to measure, how to measure it, and, once the measurements are collected, how to interpret them. This last phase is the most difficult, and it's here that I suspect that John Dunlavy's many years of experience in designing and building speakers is a factor, over and above the measurements themselves. Furthermore, although the DAL factory in Colorado Springs has a first-rate speaker-measurement facility, its listening room is also well set up, and Dunlavy has admitted to me that the development of his latest speakers has involved much more time spent in listening tests than in measuring per se. For the audiophile, of course, questions about the role of measurements in speaker design are, well, academic. We're more interested in the outcome than the process, and we use our ears to evaluate that. In fact, it was the sound of the SC-IV that first brought it to my attention. When I heard it at the 1993 Summer CES, I had the feeling that I was listening to something quite special. Having had a pair in my listening room for the past three months, I know the speaker is very special. In my opinion, it's not only an outstanding speaker for anything anywhere near its price level, it's also a genuine contender for Class A status [if it had true high-level extension to 20Hz, like DAL's larger SC-VI—Ed.]. It's been said (footnote 6) that if a reviewed component is really good, the reviewer should shed tears of sorrow while he or she boxes it up to return it to the manufacturer. We might call this the Audiophile Lachrymal Response Test (ALRT), and the speakers that I've had in my listening room for review in the past two years (Acarian Alán IV, Unity Audio Signature One, and Pyramid Signature) have all passed it—at least metaphorically. I must now admit that the DAL SC-IV did not pass the ALRT. Oh, I suppose it would have, but, anticipating extensive responsiveness on the ALRT, I decided not to put myself through this aversive experience. I'm buying the review pair.

---

This item will be professionally packaged and insured for safe transit to your home.   

If we don’t have the original manufacture's packaging, we use heavy duty double ply corrugated boxes with Instapak expanding foam custom inserts.  In many cases this has proven to be better than the original packaging.  We also use high quality fiber reinforced tape to seal our packages.  Lightweight items will be bubble wrapped and shipped in a high-quality box. 

This item is available for pickup in Ridgewood, NJ or Union Square, NYC (with convenient parking in the building).

NJ Residents or anyone picking up without a resale certificate will need to pay NJ Sales Tax.

Use the Buy It Now button and we will cover the PayPal fees.

Thanks for looking and be sure to call or text 646.852.2073 with any questions. 

Please also be sure and visit our Audiogon e-store to see the rest of the items we have for sale www.audiogon.com/stores/skyfi

---

WHO WE ARE 

Skyfi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of select high end audio equipment.  We only buy equipment the we admire and are passionate about. No mid-fi, no gimmicks, and no junk. 

Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. If it does not meet or exceed the original manufactures specifications, it will not be sold.  We are very selective about the equipment we purchase, focusing on mostly analog, high-build quality, American, and European built units.

Through our sister company, which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Project, and Sony ES, we have access to OEM parts, service, and support.  If you are local and are looking for any new equipment for the above-mentioned manufacturers, please drop us a line as we can arrange both sales and professional installation in the tri-state area

PURCHASING GUIDELINES

We do not accept or review any offers that do not go through the official Audiogon system. We have too many items for sale and its nearly impossible to keep track of offers outside of the official system. Please don’t message, email, or text any offers. 

If you do not see a “Make an Offer” button, it means we are not considering any offers on that item.   

PAYMENTS

We prefer working through PayPal, which allows you to use a credit card or bank transfer. We do not charge extra for any payment fees if you purchase the item at the asking price.  You can also send us a personal check (which will need to clear before shipping), certified check, money order, or wire transfer. International clients without access to PayPal should use a bank wire transfer. 

If you are picking up an item, we do not accept PayPal.  You must pay in person with cash, certified or bank check, or wire transfer.  If you make a PayPal payment and are picking up the item, it will be returned. 

TRADE IN POLICY 

We accept trade-ins of equal or lesser value under certain conditions.  Simply ask and let us know the exact model, condition, and the accessories that are included.  Such as the original box, remote, manual, etc.  We will only consider high-end equipment from mainstream manufacturers such as McIntosh, Mark Levinson, Audio Research, Krell, etc. and will typically pass on displays, projectors, receivers, dated processors, and mid-fi equipment of any type.  We will offer a fair value for your equipment, but keep in mind we are running a business and will need to be able to resell the equipment at a profit after investing a great deal of time and resources in testing, certifying, repairing, cleaning, and packaging the incoming equipment.  If you are looking for top dollar we suggest attempting to sell it directly to an end user on your own.

SELL US YOUR GEAR (Working or Broken)

We will also purchase your used or broken gear and arrange pickup if you are in our local market.  Just drop us a note for a quote but be sure to include the condition and what is included. 

HOW TO VISIT US

We are currently operating from a residence in Ridgewood, NJ.  You are welcome to make an appointment if there is a piece of equipment you would like to see in operation before or after purchase.  We have a well-equipped, dedicated listening room with tons of equipment of all makes and models.  We are not a store, so please don’t make an appointment if you are just curious as to how a speaker or piece of equipment sounds.  In essence, no tire kickers please.

If you are in NYC and cannot make it out to Ridgewood, we can arrange pickup in Union Square (14th Street) after the purchase.   You can call or text 646.852.2073 with any questions or to schedule an appointment.  We can also arrange to install, calibrate, and tune the gear in your listening room if you are local to the area.  This is super useful when purchasing large speakers or heavy amplifiers.  It is also great for ensuring your new turntable is setup correctly in its final resting place.  

Thanks for looking and please send us your email address if you would like to receive a list of the equipment we receive from time to time.  We promise not to bombard you with junk email.   

V1.5