ANTHEM Integrated 225 Amplifier1 yr. Warranty; Fully Refurbished;usedANTHEM Integrated 225 Amplifier 1 yr. Warranty; Fully Refurbished; Excellent Condition - 50% Off; Free ShippingANTHEM Integrated 225 Amplifier 1 yr. Warranty; Fully Refurbished; Excellent Condition - 50% Off; Free Shipping MSRP: $1999.95 USD/ea. pcX Price: $999.95 USD/ea - 50% Off + Free Shipping B...999.95

ANTHEM Integrated 225 Amplifier 1 yr. Warranty; Fully Refurbished; Excellent Condition - 50% Off; Free Shipping

Listing ID: lis909h1 Classified 
 Listed  · 1233 Views

parts_connexion 

member since November 2002

Parts ConneXion  Verified Dealer

Last 12 months
All-time1476100.0%

3 Watchers

Time Left: None

This listing has ended.

Condition
9/10
Payment methods

Contact seller after sale to pay viaVISA/Mastercard or American Express

Ships fromBurlington, Ontario, L7L 5J7
Ships toUnited States and Canada
Package dimensions29.0" × 14.0" × 22.0" (37.0 lbs.)
Shipping carrierUPS
Shipping costFree
Original accessoriesRemote Control, Box, Manual
AverageResearch Pricing

ANTHEM Integrated 225 Amplifier 1 yr. Warranty; Fully Refurbished; Excellent Condition - 50% Off; Free Shipping

MSRP: $1999.95 USD/ea.


pcX Price: $999.95 USD/ea - 50% Off + Free Shipping

Built-In Phono Stage

Designed specifically to accommodate today’s high-quality Moving Magnet phono cartridges, the Integrated 225’s built-in phono stage will delight even the most die-hard vinyl enthusiast.

Since the job of the phono stage is to supply most of the gain, two factors are critical in achieving the highest level of playback quality: a superior approach to RIAA equalization and the quality of amplification used to step-up cartridge output to line-level voltage.

The Integrated 225’s phono stage benefits from a split active/passive equalization topology. Active equalization of the low-frequencies occurs at the 50 Hz and 500 Hz roll-off points (as defined by the RIAA equalization curve). At the 2122 Hz mark (also defined by the RIAA curve) however, high-frequency equalization remains passive. The original signal passes through the curve in tact and with perfect linearity; no musical information is lost or distorted and the nuances of the original recording remain completely preserved.

In an effort to keep component parts to a minimum within the signal path, the non-inverting series feedback topology in this stage is designed around only two dual high-quality op-amps. The first provides all of the gain, while isolating the feedback network from the cartridge to ensure accuracy in frequency response. The second is configured as a buffer, isolating the equalization filter network from the volume control to prevent even the tiniest variation in frequency response when the volume level is adjusted.

The final result? Exceptional retrieval of all of the magic hidden in those vinyl grooves … from a silent background emerges tight, accurate bass, lightning fast transients, and a high-frequency detail and extension that will leave the listener aching for more.

PHONO PREAMPLIFIER
The phono preamplifier is suitable for moving magnet and high-output moving coil cartrdigesInput Impedance47 kΩInput Capacitance100 pFMaximum Input18 mV at 20 Hz, 140 mV at 1 kHz, 160mV at 20 kHzGain (at 1 kHz)35 dBCrosstalk (at 1 kHz)80 dBRIAA Response+/- 0.5 dB (100 Hz to 20 kHz); -1 dB (20 Hz)THD+N (at 1 kHz, 5 mV input)0.05%S/N Ratio (ref. 5 mV at 1 kHz, IEC-A filter)83 dBPREAMPLIFIERInput Impedance30 kΩ'Pre-Out' Output Impedance560 Ω'Rec-Out' Output Impedance100 ΩRated Input1.0 VrmsMaximum Input7.6 VrmsMinimum Load5 kΩRated Output (100 k1 load)1.0 VrmsMaximum Output (100 k1 load)7.6 VrmsHeadphone Output500 mW into 32 Ω at 0.03% THD+NChannel Separation (at 1 kHz)75 dBCrosstalk Between Inputs (at 1 kHz)72 dBXLR Pin ConfigurationPin 1: Ground; Pin 2: Positive; Pin 3: NegativeFrequency Response and Bandwidth20 Hz to 20 kHz (+0, -0.1 dB); 1 Hz to 170 kHz (+0, -3 dB)THD+N (at rated input and output, 80 kHz BW)0.003%IMD (CCIF at 15 kHz and 16 kHz)0.0005%S/N Ratio (A-weighted, ref 2.0 Vrms)105 dBPOWER AMPLIFIER
(per channel, continuous RMS, 20 Hz to 20 kHz, <1.0% THD)Frequency Response20 Hz to 20 kHz (+0, -0.15 dB)Bandwidth1 Hz to 200 kHz (+0, -3 dB)THD+N0.01% at 1 kHz, 0.03% at 20 kHz (100 W into 8 1)Power Bandwidth< 10 Hz to 100 kHz (+0, -3 dB, 200 W into 8 1)Slew Rate25 V/µsHeadroom1.4 dB (8 1), 2.8 dB (4 1)Damping Factor80 at 1 kHz (ref. 8 1)S/N Ratio (A-weighted, ref 225 W)105 dBCrosstalk> 57 dB (100 Hz to 10 kHz)Voltage Gain29 dBCONTROLInfra Red
Carrier Frequency38 kHz
Max. Emitter CurrentPass-through of inputTriggerInput PolarityNon-polarized
OutputPass-through of inputPOWER REQUIREMENTSImpedance8Ω4Ω# of Channels Driven1Both1Both*Short Term240 W225 W (FTC)330 W310 W*Power Consumption (8 Ω load)Maximum800 W
Typical300 WFuse Rating (Fuse is internal)Anthem serviceable onlyLow Voltage Version: In countries where the line voltage is 120V, this product operates from a single phase AC power source that supplies between 108V and 132V at a frequency of 60 Hz.High Voltage Version: In countries where the line voltage is 220V, 330V or 240V, this product operates from a single phase AC power source that supplies between 216V and 264V at a frequency of 50 or 60 Hz.DIMENSIONSWidth5-7/8 inches (14.9 cm) including feetHeightWidth 17-1/4 inches (43.8 cm)Depth18 inches (45.7 cm)Weight (Unpacked)42.6 lb (19.4 kg)ADVANCED LOAD MONITORING (ALM)

Anthem® integrated amplifiers are designed to perform flawlessly - offering stunning musicality, tonal neutrality and incredible dynamics while driving any speaker load reliably under real-world conditions! The power supply is conservatively rated and the amplifiers run cool for greater reliability, but we didn't stop there.

These amplifiers feature our ALM (Advanced Load Monitoring) circuitry which protects sensitive output devices by constantly monitoring temperature, current and voltage to ensure optimum long-term performance. ALM is totally non-invasive - it is not in the signal path and only engages in the most extreme circumstances to protect the amplifier from damage by maintaining the safe operating area of the output devices. Buyer beware however! Not all amplifier manufacturers have sophisticated load-monitoring provisions. Many have saved the added cost, leaving their output devices unprotected, choosing instead to use the amplifier's output devices as "fuses." At Anthem, ALM is just one of the ways in which our products provide owners with years of reliable service.

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.