Tidal Audio Amea Diacera Signature Black

Originally, crafted in 2007 and purchased in 2008 by the current owner, these German statement loudspeakers reach far beyond the high-end.

This is a very special and rare pair of speakers. First pair of this type ever build by Tidal Audio specially commissioned by and for the owner, and the first (and only) stand mounted speaker using the famous 30mm black diamond Accutone tweeter.

Specifications (see also See: http://www.tidal-hifi.com/english/amea-diacera2.htm).

• TIDAL-RMD-cabinet, 4° degrees inclination design

• 1 x 173 mm (7") Thiel & Partner (Accuton) woofer with black ceramic-diaphragm

• 1 x 30 mm (1,2") Thiel & Partner (Accuton) tweeter with black diamond-diaphragm

• passive crossover network with ultra low tolerance components, exclusive use of Supremecap-MKP-capacitors, metalfilm-resistors, massive copperband air-core-inductors, microphonically isolated x-over board

• extremly linear frequency response, excellent step response, optimised phase and group delay

• massive silver/goldplated soft-copper binding posts with removeable heads for fullsize-eylets, spades and banana's

• serial accessory: 1 professional ATA-flightcase with all components and parts inside, microfibre-cleaning cloth, owners manual, original Amea-Isolatorstand in black piano finish, 2 complete sets 'speaker-to-stand' isolators, 2 complete sets 'stand-to-ground' isolators, all stainless steel screws and tools to assemble it

• cabinet finish, high gloss polished piano lacquer: midnight black
  

• nominal power input: 100 / 250 VA

• nominal impedance: 6-8 Ohm

• frequency response: +/- 0.9 dB (FFT, 8ms, 150Hz - 10.000Hz) F3 = 42 Hz, Fmax [email protected]

• recommended amp input: We recommend quality instead quantity. Real 40 Watt at 8 Ohm are ok for normal listening levels (in rooms up to 30-40m²).

• To use the whole dynamic range of it and for listening complex music also from time to time very loud we recommend >120 watts at 8 ohm.

• efficiency: since mostly unrealistic numbers of competitors we don't want to confuse clients by comparing non-saying numbers on paper. Therefore it is: "Good efficiency, an easy load also for tube amps / SET's".

• dimensions: 47 cm x 22 cm x 33 cm

• weight: 187 lbs. / 83 Kg (pair incl. packaging)

Notes:

• THESE LOUDSPEAKERS HAVE BEEN TRADED IN AT AUDIO NOTE INDIA BY A DISCERNING CUSTOMER AND HAVE BEEN FULLY CHECKED TO BE FOUND IN 100% WORKING AND AESTIC CONDITION.

• NOTE: THE OFFER COMES INCLUDING THE VERY HEAVY STANDS WHICH ARE CUSTOM MADE ON MANUFACTURERS SPECIFICATION IN INDIA. THEY HAVE A VERY SOPHISTICATED DISIGN, TAILOR MADE FOR THESE SPEAKERS, WITH TOP AND BOTTOM PLATES OF SANDWICH CONSTRUCTION WHILE THE PILLARS ARE FILLED WITH SEVERAL DIFFERENT MATERIALS TO PROVIDE OPTIMUM RESONANCE CONTROL. THESE STANDS ARE PROHIBITIVELY HEAVY FOR INTERNATIONAL TRANSPORT, HOWEVER THEY ARE AVAILABLE FOR THE BUYER WHO PAYS PACKAGING (CRATING) AND SHIPPING.
• THE SPEAKER WILL BE SHIPPED IN THEIR ORIGINAL FLIGHT CASE.

• CONTACT [email protected] FOR MORE INFORMATION