You are looking at a Macintosh MVP-891 in excellent condition with all accessories included with the original packaging as well.  This was a lightly used dealer demo and now a one owner unit.  It has seen less than 20 plays in the home system.  Works perfectly and in like new condition.

McIntosh Laboratories traditionally introduces products with mature technology and superb performance, be they amplifiers, preamplifiers, processors, or in, this case, a universal A/V player. When you crack open the solid McCarton, you are already anticipating a great home entertainment experience. And, I am happy to report, the MVP 891 does not disappoint in most respects. This player has state-of-the-art onboard processors, offers balanced and unbalanced two-channel playback, and will spin virtually any silver disc alive. The USB port will allow high resolution playback from your computer provided that you have software up to the task.  The only noticeable shortcomings are the remote unit’s small buttons with hard to read labels and a lack of video apps. However, these would be issues primarily for those without universal remotes (the McRemote could be readily cloned) or without smart TVs that are app-enabled. Make no mistake, this player is built like no other and, for members of the large A/V library club, look no farther, the MVP 891 will be your final destination.

–

Specifications :

Audio: 

Number of Channels

2 and 7.1

Output Level

4.0Vrms Balanced (2 channel Output)

2.0Vrms Unbalanced (2 channel Output and

7.1 Channels)

Output Impedance

600 ohms Balanced (2 channel Output)

600 ohms Unbalanced (2 channel Output and

5.1 Channels)

Audio Frequency Response (Blu-ray, DVD)

4Hz to 22,000Hz (48kHz Sampling, Linear Audio)

4Hz to 44,000Hz (96kHz Sampling, Linear Audio)

4Hz to 88,000Hz (192kHz Sampling, Linear Audio)

SACD Frequency Response

4Hz to 40,000Hz

CD Frequency Response

4Hz to 20,000Hz

Signal to Noise Ratio

115dB

Dynamic Range

110dB

Harmonic Distortion

0.002%

Channel Separation

Better than 110dB (1,000Hz)

Video Section:

Signal System

NTSC/PAL Region Code A, 1

Component Video Output Level

Y Output Level 1.0Vp-p (75 OHM)

PB/CB Output Level 0.648Vp-p (75 OHM)

PR/CR Output Level 0.648Vp-p (75 OHM)

Composite Video Output Level

1Vp-p (75 OHM)

HDMI Output

Supports 3D, Deep Color, x.v. Color, and CEC

Digital Output

Optical: -15dbm to -21dbm

Coaxial: 0.5V p-p/75 ohm

Digital Signal Format

Sampling Frequencies: 44.1kHz, 48.0kHz, 96.0kHz

and 192.0kHz

Transport

Laser Beam Wavelength: 630nm/810nm

Laser Power: CLASS I

Power Requirements

Field AC Voltage conversion of the MVP891 is not possible. The MVP891 is factory configured for one of the following AC Voltages:

100 Volts, 50/60Hz at 50 watts

110 Volts, 50/60Hz at 50 watts

120 Volts, 50/60Hz at 50 watts

220 Volts, 50/60Hz at 50 watts

230 Volts, 50/60Hz at 50 watts

240 Volts, 50/60Hz at 50 watts

Standby: less than 0.5 watt

Audio Specifications

Number of Channels

2 and 7.1

Output Level

4.0Vrms Balanced (2 channel Output)
2.0Vrms Unbalanced (2 channel Output and

7.1 Channels)

600 ohms Balanced (2 channel Output)

600 ohms Unbalanced (2 channel Output and

7.1 Channels)

Audio Frequency Response (Blu-ray, DVD)

4Hz to 22,000Hz (48kHz Sampling, Linear Audio)
4Hz to 44,000Hz (96kHz Sampling, Linear Audio)
4Hz to 88,000Hz (192kHz Sampling, Linear Audio)

SACD Frequency Response

4Hz to 40,000Hz

CD Frequency Response

4Hz to 20,000Hz

Signal to Noise Ratio

115dB

Dynamic Range

110dB

Harmonic Distortion

0.002%

Channel Separation

Better than 110dB (1,000Hz)

Video Specifications

Signal System

NTSC/PAL Region Code A, 1

Component Video Output Level

Y Output Level 1.0Vp-p (75 OHM)
PB/CB Output Level 0.648Vp-p (75 OHM)
PR/CR Output Level 0.648Vp-p (75 OHM)

Composite Video Output Level

1Vp-p (75 OHM)

General Specifications

HDMI Output

Supports 3D, Deep Color, x.v. Color, and CEC

Digital Output

Coaxial: 0.5V p-p/75 ohm

Digital Signal Format

Sampling Frequencies: 44.1kHz, 48.0kHz, 96.0kHz
and 192.0kHz

Transport

Laser Beam Wavelength: 630nm/810nm

Power Requirements

Field AC Voltage conversion of the MVP891 is not
possible. The MVP891 is factory configured for one
of the following AC Voltages:

100 Volts, 50/60Hz at 50 watts

110 Volts, 50/60Hz at 50 watts
120 Volts, 50/60Hz at 50 watts
220 Volts, 50/60Hz at 50 watts
230 Volts, 50/60Hz at 50 watts
240 Volts, 50/60Hz at 50 watts
Standby: less than 0.5 watt

Note: Refer to the rear panel of the MVP891 for the cor-
rect voltage.

Overall Dimensions

Width is 17-1/2 inches (44.5cm)

Height is 6 inches (15.2cm)

Depth is 16 inches (40.6cm) including connections

Note: When the Disc Tray is opened, the panel clearance
required in front of mounting panel is 6-3/4 inches
(17.2cm).

Weight

24 pounds (10.9Kg) net, 40.4 pounds (18.3Kg) in ship-
ping carton

Shipping Carton Dimensions

Width is 26-1/2 inches (67.3cm)
Depth is 24-1/4 inches (62.2cm)
Height is 11-3/4 inches (29.9cm)