USA Tube Audio LabsRC-35 Analog Tube Room CorrectionUSA Tube Audio Labs RC-35 Analog Tube Room Correction Axpona 2018 Award WinnerAXPONA 2018 High End Audio Show WinnerPositive Feedback Editors Choice “Audio Oasis” Award! Positive Feedback Online Audio Oasis Award USA Tube Audiohttps://www.usatubeaudio.com/product/analog/usa-...4500.00

USA Tube Audio Labs RC-35 Analog Tube Room Correction Axpona 2018 Award Winner

Listing ID: lis934h2 Classified 
 Listed  · 362 Views
Time Left: 18 Days

Ending:

Asking Price: $4,500.00

New Retail Price: $4,950.00

Buy It NowMake Offer
Condition
NEW
Payment methodsContact seller

Contact seller after sale to pay via VISA/Mastercard, American Express, Discover or Wire Transfer

Ships fromScottsdale, AZ, 85258
Ships toUnited States
Package dimensionsunspecified
Shipping carrierunspecified
Shipping cost$150.00
Agon miniAverage Research Pricing

AXPONA 2018 High End Audio Show Winner

Positive Feedback Editors Choice “Audio Oasis” Award!

Positive Feedback Online Audio Oasis Award USA Tube Audio

https://www.usatubeaudio.com/product/analog/usa-tube-audio-rc-35/

USA Tube Audio RC-35 Analog Room Correction –

100% in the Analog Domain -

Pure Class A Vacuum Tube – Triode

All Rooms are inherently bad for listening to music, especially with a high end audio system.

Loudspeakers
are designed to work inside our homes despite the fact our homes
constantly get in the way: bass modes, sidewall reflections, too
reflective, too absorptive, etc. One way to work with the problem is a
room correction device such as the RC-35. This approach typically uses a
digital product in the signal path, this being the worst possible
solution, digital is a NO!

The RC-35 is 100% in the Analog Domain and is also vacuum tube based. The result is Explosive! Layered! Lifelike!

From the moment you install the RC-35, you will be spellbound. Bottom line, the sound quality will simply be outstanding.

The
RC-35  is the choice of recording engineers, globally – reducing or
increasing bass, treble, midrange, adjusting phase. In other words.
whatever damage the room is doing to the sound, your loudspeakers put
out the opposite of the damage, thereby a superb sonic performance.

 

The RC-35 Experience

The
RC-35 room correction machine is 100% in the analog domain. The RC-35
will allow you to control and dial in, the best possible performance.
All listening rooms have inherent defects, bass boom, midrange too
bright, highs missing. Whatever the defect, the RC-35 will correct the
issue.

Have favorite CD’s, electronic music files that simply do
not sound good? Now, you can use the RC-35 to fix the anomaly, allowing
you to enjoy music recorded in the day when recording technology was
poor, or the recording engineer did a poor job. This happens all the
time.

The RC-35 comes from a long lineage of Professional
Equipment used in recording studios globally. Satisfying the discerning
requirements of musicians and recording engineers, now this same process
is available to 2 channel, high end audio.

Each RC-35 is hand-built, individually tested, no corners are cut. Only Top components make up the RC-35.

2 year warranty – 90 days vacuum tubes. Original purchaser.

 

The USA Tube Audio RC-35

The most common statement from 2 channel clients, mixing and mastering engineers who use the RC-35?

“I literally feel like I’m on cloud 9 when I use this thing,
because it should not be this easy to get my music sounding so good!”

Not
aimed at precisely targeting certain frequencies, it is intended to be a
broad strokes room correction device that also acts as a harmonics
generator. A very special machine for the home or recording studio.

The RC-35 is a discrete, Pure Class A Triode, vacuum tube, stereo unit.

 

OPERATING YOUR RC-35: – See attached Owners Manual for details

Click link below to open Owners Manual

USA TUBE AUDIO RC-35 OWNERS MANUAL

 

– The BYPASS switches allow the user to completely disengage the RC-35 at any time in order to properly A/B a mix (true bypass).


The TRIM control allows the user to precisely match the volume coming
from the RC-35 to any desired level, without altering the tone of the
unit.

– Left and Right CALIBRATION is used to gain match the Left
and Right signals, accounting for any volume discrepancies encountered.
Interestingly enough, these calibration controls can also be used to
alter the tonal response of the RC-35 if so desired. For example, it is
possible to bring the Calibration volumes up and the Trim down,
resulting in the RC-35 driving the signal harder than normal, increasing
harmonic content.

– The AGGRESSION control alters the drive in the circuit, allowing you to push the tubes for extra saturation.


The LOW, MID, and HIGH controls manipulate the three bands, but in a
way that adds more dynamic, harmonic content the higher the RC-35 is
set. Take note that the Mid control covers a massive amount of territory
while the Low and High controls are narrower by comparison.

The AIR control boosts the ultra high frequencies and is typically a favorite control in this unit.

LOW SHIFT alters the response of the Low control, moving the low shelf from 150hz to 80hz

MID SHIFT alters the response of the Low and Mid controls, essentially assigning the low mids to either control.

HIGH SHIFT changes the curve of the High shelf.

– AIR SHIFT changes the curve of the Air shelf.

– The VINTAGE switch toggles between a “modern” mode (think more hifi and quick), and a “vintage” mode (darker, older sounding).

 

Front Panel Controls – See attached Owners Manual for details

Click link below to open Owners Manual

USA TUBE AUDIO RC-35 OWNERS MANUAL

 

The Bypass switches are true bypass, meaning, they literally remove the RC-35 from the signal chain completely.

The Calibration controls allow you to fine tune the left and right
channels in order to achieve a proper balance in the stereo image. As
well, the Calibration controls function as gain controls, and as such,
can be driven hard for a more aggressive tone.*
The Aggression
control allows the entire circuit to change its overall feel and sound.
At 0% you will hear the RC-35 at it’s most neutral and 100% is the most
aggressive.
The Low Shift switch allows you to change the rolloff of the Low shelf control.
The Low control is actually a shelf control controlling the low frequencies.
The Mid Shift switch alters the response of the Mid control, affecting primarily the low mids range of the signal.
The Mid control covers the range between the Low and High controls.
The High Shift moves the high shelf by roughly 1k.
Vintage mode offers a darker, more raw tone that can be very useful when full analog tone is desired.**
The High control is a shelf control controlling the higher frequencies.

This switch allows you to switch the output impedance of the RC-35 from
high to low.You will notice that switching between LoZ and HiZ will
alter the overall sound of the RC-35 and will require a recalibration.
HiZ has a very large interaction with other gear following the RC-35 and
thus will sound different in various locations in your signal chain.
LoZ will have lower overall color but will interact much less with other
gear following the RC-35.
The Air control is another shelf that controls the ultra-high frequencies, and yes it overlaps the High control on purpose.***
Air Shift moves the Air band by roughly 1k
The Trim control allows you to set the output volume coming out of the RC-35.
If you are having a ground loop issue, flip this switch!
Press this button to turn on or off the RC-35.

*Take
note that the Air control is greatly affected by the Calibration
controls in that the harder you drive the Calibration, the less db swing
you will see from the Air control

**Do not be afraid to significantly boost the High and Air controls to compensate for the darkening of the signal.

***Your
RC-35 has been calibrated to give as neutral a tone as possible with
your knobs in the noon (50%) position. You will notice that not all of
the knobs run the full range from 0-100% – that is perfectly normal (a
couple can be a slight bit offset). The RC-35 was designed to be
sonically rich and harmonically complex, and that ended up meaning that
not all of the controls lined up perfectly. Rather than altering the
circuit to accommodate aesthetics, the decision was made to stick with
what sounded best and just calibrate the knobs to be in the correct
position.

 

RC-35 factory calibration

calibrated to be sonically neutral with the Aggression control on the 0% position.
calibrated to be sonically neutral with the Trim control on the 100% position.
calibrated to be sonically neutral with the Bass Shift switch in the “150hz” position.
calibrated to be sonically neutral with the Mid Shift switch in the “Full” position.
calibrated to be sonically neutral In LoZ.
calibrated to be sonically neutral with the High Shift switch in the “Smooth” position.
calibrated to be sonically neutral with the Air Shift switch in the “On” position.
calibrated to be sonically neutral with the Vintage switch in the “Off” position.

You
will notice that switching between LoZ and HiZ will alter the overall
sound of the RC-35 and will require a recalibration. HiZ has a very
large interaction with other gear following the RC-35 and thus will
sound different in various locations in your signal chain. LoZ will have
lower overall color but will interact much less with other gear
following the RC-35.

Note that the RC-35 will be more transparent with a lower signal feeding it and more colored with a hotter signal feeding it.

 

Rear Panel Controls – See attached Owners Manual for details

Click link below to open Owners Manual

USA TUBE AUDIO RC-35 OWNERS MANUAL

 

AC Mains power inlet.

Our power transformers are all made in America, paper wound, and able
to power up a full vintage guitar amplifier if desired, meaning this
transformer will still be going strong for the next…well…century.
Switch the mains voltage from 110v to 220v (whatever your standard is)
The mains fuse is rated at .6A, and yes, it is a circuit breaker
Caution!!! The voltages present inside of your unit are as high as 450v! DO NOT OPEN THE RC-35.
Line level balanced output – XLR (Pin 1 = Ground, Pin 2 = Hot, Pin 3 = Cold)
Line level balanced input – XLR (Pin 1 = Ground, Pin 2 = Hot, Pin 3 = Cold)

 

Specifications

Circuit designed and built – USA Tube Audio – RC-35
Stereo Controls
Tubes: Three 12AX7’s (ECC83)
Transformers: Jensen In and Out
Input Load Impedance: 10K Ohms
Output Impedance: LoZ or HiZ, Transformer Balanced
Maximum Output Level: +23 dBu
Frequency Response: 10hz-20Khz +/- 1dB
Signal to Noise: 108db, depending on output impedance setting
Power: 115v/220v

Dimensions:
3.5” (H) x 19” (W) x 10” (D)

[email protected]

www.usatubeaudio.com – 1-800-676-1085 Ext 2
8355 E. Butherus Dr. Suite #1 – Scottsdale, Arizona 85260

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy
Return Window

Returns are not accepted on this item.

ch1 member since September 2006

 
USA TUBE AUDIO  Verified Dealer
Last 12 months
All-time12197.6%
Items from this seller