set of Schmitt Custom Audio 6N OCC High Purity Copper Speaker Cables spanning 5ft
each. Built today; 2/3/2018 with zero burn in time.
These are built with 2.5mm square - 49 strands 0.24mm 6N OCC high purity copper, sealed in
clear PTFE equaling near a 14 gauge wire per Furez SP8 SB40Ag Silver
Plated Spade Speaker Connectors sealed in clear heat shrink with color coded
polarity at the base of each connector.
strands are twisted, dressed Techflex Snake sleeves and sealed in a premium
selection of heat shrink.
Furez SP8 SB40Ag Silver Plated Spade Speaker
These are the Best
Speaker Cable Spade Connectors on the market today!
These Spades are Machined from C11000
Pure Copper, then Direct Silver Plated which gives them a
conductivity rating of 105% for maximum signal transfer. These Solid
Copper Pure Silver plated Spade Connectors are also available in Non-Plated,
version. If you are looking for the best possible connectors for your
speaker cables, these are it! These are the best connectors money can
buy, but at a very reasonable price. These Silver Plated Spade Connectors
are a Great Choice for your Stereo Audio and Home Theater Systems.
Furez SP8-SB40AG Silver Spade
Speaker Cable Connector Features/Specifications:
• Ag - Direct 5um Pure Silver Plated Spade
Speaker Cable Connector
Designed for Common 5/16" (8mm) Binding Posts
• Machined from C11000 101% IACS Copper
• Single Piece Electrical Path Construction Maximizes Signal
• 25 Deg Offset Angle
• Deep Barrel and Forward Set Screws Protect Against Shorting
- Conductor Insulation can be Inside the Banana Connector
• Dual Torx T6 Set Screws for securing speaker cable
• 0.158 (4.01mm) Speaker Cable Entry ID
The Furez SP8-SB40AG - Silver Plated Spade Speaker Connectors are machined
from a single solid piece of the highest conductivity copper possible (C11000
101% IACS) ensuring maximum signal transfer is achieved. Dual T6 Torx set
screws provide very secure attachment of speaker cable and each spade connector
comes with 2 set screws. Additionally, the SP8-SB40 spade speaker
connector is designed with a deep barrel and forward positioned set screws so
the insulation of the cable can remain inside the barrel of the connector thus
alleviating the issue of exposed bare wire strands. The SP8-SB40 series spade
speaker cable connectors are offered without plating, or with direct silver
plating (app. 106% IACS) to suit a variety of installation requirements. Nickel
(app. 24%IACS), Rhodium (app. 39% IACS) and Platinum (16% IACS) are not used in
our plating schemes because these low conductivity metals only take away
from the performance of the connector while adding cost. IACS (International Annealed Copper Standard) is the standard by
which conductivity of copper alloys and metals are compared.
Schmitt Custom Audio Cables for the “Serious
Free Shipping to the lower 48
intercontinental United States